John Deere 5095M VS Deutz-Fahr DX 3.10 specs comparison
John Deere 5095M
General Infos| Make | John Deere |
| Model | 5095M |
| Country | United states |
| Production | From 2008 Until 2011 |
| Price | 57,669 USD |
| Tractor type | Utility tractor |
| Fuel | diesel |
| Service repair manual | John Deere 5095M Manual |
Dimensions, sizes and tires
| AG front tires | 7.50-16 (2WD) |
| AG rear tires | 14.9-28 |
| Lawn front tires | 27/12LL-15 (2WD) |
| Lawn rear tires | 27/12LL-15 (2WD) |
| Indus front tires | 11LL-15 (2WD) |
| Indus rear tires | 19.5-24 |
| Weight | 6,591 lbs or 2989 kg |
| Length | - |
| Width | - |
| Height | - |
| Wheelbase | 85.6 inches [217 cm] |
| Ground clearance | - |
| Turning radius | 12.7 feet [3.9 m] |
| Rear tread size | 59.6 to 71.4 inches |
| Front tread size | 58.6 to 78.3 inches |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 276 ci or 4.5 L |
| Cylinders | 4 cylinders |
| Engine power | 95 hp or 70.8 kW |
| Engine RPM | 2200 (rpm) |
| Torque | 372 lb-ft or 504.4 Nm | Torque RPM | 1600 (rpm) |
| Fuel type | diesel |
| Fuel injection | - |
| Fuel tank size | 30.3 gal or 114.7 L |
| Oil capacity | 8.8 qts or 8.3 L |
| Oil change | - |
| Starter motor | - |
| Starter volts | 12 V |
| Parts And Accessories | John Deere 5095M Parts |
| Batteries number | 1 |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | 925 |
| Ground force | negative |
| Charging system | alternator |
| Charging Volts | - |
| Charging Amps | 70 amps |
| Trans system | PowrReverser Plus |
| Trans type | partially synchronized with power shuttle |
| Trans gears | 32 forward and 16 reverse |
| Clutch system | - |
| Wheel drive | 4x2 2WD |
| Final drive | inboard planetary |
| Steering | hydrostatic power |
| Braking system | hydraulic wet disc |
| Cabin type | Foldable ROPS |
| Differentiel lock | shift-on-the-move electro-hydraulic rear differential lock |
| System | - |
| Valves | 0, 2 or 3 |
| Pump flow | 18.4 gpm or 69.6 lpm |
| SVC flow | - |
| Steering flow | 6.3 gpm or 23.8 lpm |
| Tank capacity | 11.9 gal or 45.0 L |
| Hydraulic pressure | 2828 psi or 195.0 bar |
| Max flow | 24.7 gpm or 93.5 lpm |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | - |
| Fuel consumption | - |
| Pulling power | - |
| Claimed power | 80 hp or 59.7 kW |
| Real power | 83.03 hp or 61.9 kW |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | independent electrochydraulic |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | 5.1 gal/hour or 19.3 l/hour |
| Hitch system | - |
| Rear hitch | independent electrohyraulic |
| Rear hitch lift | 3,595 lbs or 1630 kg |
| Front hitch | - |
| Front hitch lift | - |
Deutz-Fahr DX 3.10
General Infos| Make | Deutz-Fahr |
| Model | DX 3.10 |
| Country | Germany |
| Production | From 1984 Until 1990 |
| Price | - |
| Tractor type | Utility tractor |
| Fuel | diesel |
| Service repair manual | Deutz-Fahr DX 3.10 Manual |
Dimensions, sizes and tires
| AG front tires | 7.50x16 |
| AG rear tires | 14.9x28 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 5776 lbs or 2619 kg |
| Length | 140.2 inches [356 cm] |
| Width | 82.3 inches [209 cm] |
| Height | 88.5 inches [224 cm] |
| Wheelbase | 82 inches [208 cm] |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | 59 to 75 inches |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 172.50 ci or 2.8 L |
| Cylinders | 3 cylinders |
| Engine power | 46 hp or 34.3 kW |
| Engine RPM | 2150 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | diesel |
| Fuel injection | - |
| Fuel tank size | 19.8 gal or 74.9 L |
| Oil capacity | 8.5 qts or 8.0 L |
| Oil change | - |
| Starter motor | - |
| Starter volts | - |
| Parts And Accessories | Deutz-Fahr DX 3.10 Parts |
| Batteries number | - |
| Batteries voltage | - |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | - |
| Charging system | - |
| Charging Volts | - |
| Charging Amps | - |
| Trans system | Dual-Split |
| Trans type | two-speed power shift |
| Trans gears | 24 forward and 8 reverse |
| Clutch system | dry disc |
| Wheel drive | 4x2 2WD |
| Final drive | - |
| Steering | power |
| Braking system | mechanical drum |
| Cabin type | Four-post ROPS with canopy |
| Differentiel lock | mechanical rear |
| System | open center |
| Valves | 1 to 3 |
| Pump flow | 9.8 gpm or 37.1 lpm |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | 4 gal or 15.1 L |
| Hydraulic pressure | 2538 psi or 175.0 bar |
| Max flow | - |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | - |
| Fuel consumption | - |
| Pulling power | - |
| Claimed power | - |
| Real power | - |
| Engine @RPM | - |
| PTO Clutch | dry disc |
| Rear PTO | independent |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | independent |
| Front PTO RPM | 1000 (rpm) |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | - |
| Hitch system | position and draft control |
| Rear hitch | I |
| Rear hitch lift | 4189 lbs or 1900 kg |
| Front hitch | II |
| Front hitch lift | - |
Related tractor comparison
Deutz-Fahr DX 3.10 Kubota L2250
John Deere 5095M CaseIH 785
John Deere 5095M Hesston 70-66
Deutz-Fahr DX 3.10 CaseIH 3294
John Deere 5095M Steyr 8090
Deutz-Fahr DX 3.10 Kubota M7030
Choose another tractor
Useful links and guides ....
- John Deere provided us with the latest version of its 5095M service repair manual
- Find All mechanical and electrical parts and accessories of John Deere 5095M farm-tractor here
- Get your Deutz-Fahr DX 3.10 manual book version
- Cabine, electrical And mechanical parts for Deutz-Fahr DX 3.10 farm-tractor here
