Deutz-Fahr DX 3.10 Technical specs


Make Deutz-Fahr
Model DX 3.10
Company country Germany
Production years From 1984  Until 1990
Tractor type Utility tractor
Fuel diesel
Price -
Total build -
Service repair manual Deutz-Fahr DX 3.10 Manual
AG front tires 7.50x16
AG rear tires 14.9x28
Weight 5776 lbs or 2619 kg
Length 140.2 inches [356 cm]
Width 82.3 inches [209 cm]
Height 88.5 inches [224 cm]
Wheelbase 82 inches [208 cm]
Ground clearance -
Rear tread size 59 to 75 inches
Engine size 172.50 ci or 2.8 L
Number of cylinders 3 cylinders
Horsepower 46 hp or 34.3 kW
Power RPM 2150 (rpm)
Engine torque -
Engine torque RPM -
Fuel type diesel
Fuel tank capacity 19.8 gal or 74.9 L
Bore stroke 3.94x4.71 inches or (100 x 120 mm)
Oil tank capacity 8.5 qts or 8.0 L
Number of batteries -
Battery voltage -
Electric ground force -
Engine starter volts -
Parts And Accessories Deutz-Fahr DX 3.10 Parts
Transmission system Dual-Split
Transmission type two-speed power shift
Transmission gears 24 forward and 8 reverse
Clutch system dry disc
Oil tank capacity 21.1 qts or 20.0 L
Wheel drive 4x2 2WD
Steering system power
Braking system mechanical drum
Cabin type Four-post ROPS with canopy
Differentiel lock mechanical rear
Hydraulic system open center
Number of valves 1 to 3
Pump flow rate 9.8 gpm or 37.1 lpm
Hydraulic tank capacity 4 gal or 15.1 L
Hydraulic pressure 2538 psi or 175.0 bar
PTO claimed power -
PTO clutch system dry disc
Rear PTO system independent
Rear PTO RPM 540 (rpm)
Front PTO system independent
Front PTO RPM 1000 (rpm)
PTO fuel consumption -
Hitch control system position and draft control
Rear hitch I
Rear hitch lift 4189 lbs or 1900 kg
Front hitch II



Detailed review of Deutz-Fahr DX 3.10

Deutz-Fahr produced its DX 3.10 farm tractor model From 1984  Until 1990 in Germany with a Four-post ROPS with canopy cabin.
Talking dimensions and weight, this model weighs 5776 lbs or 2619 kg has 82.3 inches [209 cm] of width, 140.2 inches [356 cm] of length and 88.5 inches [224 cm] of height while maintaining a wheelbase of 82 inches [208 cm] while the rear tread is 59 to 75 inches .
This tractor can fit ag tires of 7.50x16 front and 7.50x16 back .
This Deutz-Fahr DX 3.10 is powerd by a diesel engine it has 172.50 ci or 2.8 L 3 cylinders ,it can produce 46 hp or 34.3 kW at 2150 (rpm), the fuel tank capacity is 19.8 gal or 74.9 L.
This machine has 4x2 2WD wheel drive system,24 forward and 8 reverse Dual-Split transmission system.

- Deutz-Fahr provided us with the latest version of its DX 3.10 service repair manual
- Find All mechanical and electrical parts and accessories of Deutz-Fahr DX 3.10 farm-tractor here