John Deere 1650 VS Deutz-Fahr DX 3.10 specs comparison
John Deere 1650
General Infos| Make | John Deere |
| Model | 1650 |
| Country | United states |
| Production | From 1984 Until 1988 |
| Price | 19,000 USD |
| Tractor type | Utility tractor |
| Fuel | diesel |
| Service repair manual | John Deere 1650 Manual |
Dimensions, sizes and tires
| AG front tires | 6.50-16 |
| AG rear tires | 16.9-28 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 4,630 lbs or 2100 kg |
| Length | - |
| Width | - |
| Height | - |
| Wheelbase | 82.8 inches [210 cm] |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | - |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 190 ci or 3.1 L |
| Cylinders | 4 cylinders |
| Engine power | 67 hp or 50.0 kW |
| Engine RPM | 2300 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | diesel |
| Fuel injection | - |
| Fuel tank size | 21.1 gal or 79.9 L |
| Oil capacity | 12.7 qts or 12.0 L |
| Oil change | - |
| Starter motor | - |
| Starter volts | 12 V |
| Parts And Accessories | John Deere 1650 Parts |
| Batteries number | 1 |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | negative |
| Charging system | alternator |
| Charging Volts | - |
| Charging Amps | 25 amps |
| Trans system | - |
| Trans type | sliding gear |
| Trans gears | 9 forward and 3 reverse |
| Clutch system | - |
| Wheel drive | 4x2 2WD |
| Final drive | planetary |
| Steering | - |
| Braking system | differential hydraulic wet disc |
| Cabin type | ROPS |
| Differentiel lock | mechanical |
| System | open center |
| Valves | 0 to 2 |
| Pump flow | - |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | - |
| Hydraulic pressure | - |
| Max flow | 10.2 gpm or 38.6 lpm |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | 51.13 hp or 38.1 kW |
| Fuel consumption | 3.2 gal/hour or 12.1 l/hour |
| Pulling power | 6,572 lbs or 2981 kg |
| Claimed power | 60 hp or 44.7 kW |
| Real power | 62.70 hp or 46.8 kW |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | independent |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | 3.3 gal/hour or 12.5 l/hour |
| Hitch system | center link sensing with position and draft control |
| Rear hitch | II/I |
| Rear hitch lift | 2,698 lbs or 1223 kg |
| Front hitch | - |
| Front hitch lift | - |
Deutz-Fahr DX 3.10
General Infos| Make | Deutz-Fahr |
| Model | DX 3.10 |
| Country | Germany |
| Production | From 1984 Until 1990 |
| Price | - |
| Tractor type | Utility tractor |
| Fuel | diesel |
| Service repair manual | Deutz-Fahr DX 3.10 Manual |
Dimensions, sizes and tires
| AG front tires | 7.50x16 |
| AG rear tires | 14.9x28 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 5776 lbs or 2619 kg |
| Length | 140.2 inches [356 cm] |
| Width | 82.3 inches [209 cm] |
| Height | 88.5 inches [224 cm] |
| Wheelbase | 82 inches [208 cm] |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | 59 to 75 inches |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 172.50 ci or 2.8 L |
| Cylinders | 3 cylinders |
| Engine power | 46 hp or 34.3 kW |
| Engine RPM | 2150 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | diesel |
| Fuel injection | - |
| Fuel tank size | 19.8 gal or 74.9 L |
| Oil capacity | 8.5 qts or 8.0 L |
| Oil change | - |
| Starter motor | - |
| Starter volts | - |
| Parts And Accessories | Deutz-Fahr DX 3.10 Parts |
| Batteries number | - |
| Batteries voltage | - |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | - |
| Charging system | - |
| Charging Volts | - |
| Charging Amps | - |
| Trans system | Dual-Split |
| Trans type | two-speed power shift |
| Trans gears | 24 forward and 8 reverse |
| Clutch system | dry disc |
| Wheel drive | 4x2 2WD |
| Final drive | - |
| Steering | power |
| Braking system | mechanical drum |
| Cabin type | Four-post ROPS with canopy |
| Differentiel lock | mechanical rear |
| System | open center |
| Valves | 1 to 3 |
| Pump flow | 9.8 gpm or 37.1 lpm |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | 4 gal or 15.1 L |
| Hydraulic pressure | 2538 psi or 175.0 bar |
| Max flow | - |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | - |
| Fuel consumption | - |
| Pulling power | - |
| Claimed power | - |
| Real power | - |
| Engine @RPM | - |
| PTO Clutch | dry disc |
| Rear PTO | independent |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | independent |
| Front PTO RPM | 1000 (rpm) |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | - |
| Hitch system | position and draft control |
| Rear hitch | I |
| Rear hitch lift | 4189 lbs or 1900 kg |
| Front hitch | II |
| Front hitch lift | - |
Related tractor comparison
Deutz-Fahr DX 3.10 Valmet 504
Deutz-Fahr DX 3.10 Zetor 8145
John Deere 1650 CaseIH 9180
John Deere 1650 International Harvester 585
John Deere 1650 Steiger Panther KP-1400
Deutz-Fahr DX 3.10 Iseki TA270
Choose another tractor
Useful links and guides ....
- John Deere provided us with the latest version of its 1650 service repair manual
- Find All mechanical and electrical parts and accessories of John Deere 1650 farm-tractor here
- Get your Deutz-Fahr DX 3.10 manual book version
- Cabine, electrical And mechanical parts for Deutz-Fahr DX 3.10 farm-tractor here
