Deutz-Fahr DX 3.10 VS New Holland Workmaster 65 specs comparison

Deutz-Fahr DX 3.10
General InfosMake | Deutz-Fahr |
Model | DX 3.10 |
Country | Germany |
Production | From 1984 Until 1990 |
Price | - |
Tractor type | Utility tractor |
Fuel | diesel |
Service repair manual | Deutz-Fahr DX 3.10 Manual |
Dimensions, sizes and tires
AG front tires | 7.50x16 |
AG rear tires | 14.9x28 |
Lawn front tires | - |
Lawn rear tires | - |
Indus front tires | - |
Indus rear tires | - |
Weight | 5776 lbs or 2619 kg |
Length | 140.2 inches [356 cm] |
Width | 82.3 inches [209 cm] |
Height | 88.5 inches [224 cm] |
Wheelbase | 82 inches [208 cm] |
Ground clearance | - |
Turning radius | - |
Rear tread size | 59 to 75 inches |
Front tread size | - |
Turning radius | - |
Horsepower and engin specs
Engine capacity | 172.50 ci or 2.8 L |
Cylinders | 3 cylinders |
Engine power | 46 hp or 34.3 kW |
Engine RPM | 2150 (rpm) |
Torque | - | Torque RPM | - |
Fuel type | diesel |
Fuel injection | - |
Fuel tank size | 19.8 gal or 74.9 L |
Oil capacity | 8.5 qts or 8.0 L |
Oil change | - |
Starter motor | - |
Starter volts | - |
Parts And Accessories | Deutz-Fahr DX 3.10 Parts |
Batteries number | - |
Batteries voltage | - |
Battries Amps | - |
Cold Amps | - |
Ground force | - |
Charging system | - |
Charging Volts | - |
Charging Amps | - |
Trans system | Dual-Split |
Trans type | two-speed power shift |
Trans gears | 24 forward and 8 reverse |
Clutch system | dry disc |
Wheel drive | 4x2 2WD |
Final drive | - |
Steering | power |
Braking system | mechanical drum |
Cabin type | Four-post ROPS with canopy |
Differentiel lock | mechanical rear |
System | open center |
Valves | 1 to 3 |
Pump flow | 9.8 gpm or 37.1 lpm |
SVC flow | - |
Steering flow | - |
Tank capacity | 4 gal or 15.1 L |
Hydraulic pressure | 2538 psi or 175.0 bar |
Max flow | - |
Drawbar type | - |
Claimed power | - |
Drawbar horsepower | - |
Fuel consumption | - |
Pulling power | - |
Claimed power | - |
Real power | - |
Engine @RPM | - |
PTO Clutch | dry disc |
Rear PTO | independent |
Rear PTO RPM | 540 (rpm) |
Front PTO | independent |
Front PTO RPM | 1000 (rpm) |
Mid PTO | - |
Mid PTO RPM | - |
Fuel consumption | - |
Hitch system | position and draft control |
Rear hitch | I |
Rear hitch lift | 4189 lbs or 1900 kg |
Front hitch | II |
Front hitch lift | - |

New Holland Workmaster 65
General InfosMake | New Holland |
Model | Workmaster 65 |
Country | United states |
Production | From 2009 Until 2014 |
Price | - |
Tractor type | Utility tractor |
Fuel | diesel |
Service repair manual | New Holland Workmaster 65 Manual |
Dimensions, sizes and tires
AG front tires | - |
AG rear tires | - |
Lawn front tires | - |
Lawn rear tires | - |
Indus front tires | - |
Indus rear tires | - |
Weight | 5,059 lbs or 2294 kg |
Length | 131.1 inches [332 cm] (2WD) |
Width | 66.1 inches [167 cm] |
Height | 93.9 inches [238 cm] |
Wheelbase | - |
Ground clearance | - |
Turning radius | - |
Rear tread size | - |
Front tread size | - |
Turning radius | - |
Horsepower and engin specs
Engine capacity | 195 ci or 3.2 L |
Cylinders | 4 cylinders |
Engine power | 65 hp or 48.5 kW |
Engine RPM | 2500 (rpm) |
Torque | - | Torque RPM | - |
Fuel type | diesel |
Fuel injection | - |
Fuel tank size | 16.4 gal or 62.1 L |
Oil capacity | - |
Oil change | - |
Starter motor | electric |
Starter volts | 12 V |
Parts And Accessories | New Holland Workmaster 65 Parts |
Batteries number | - |
Batteries voltage | 12 V |
Battries Amps | - |
Cold Amps | 800 |
Ground force | negative |
Charging system | alternator |
Charging Volts | 12 V |
Charging Amps | 65 amps |
Trans system | - |
Trans type | partially synchronized |
Trans gears | 8 forward and 2 reverse |
Clutch system | 11-inch dry organic plate |
Wheel drive | 4x2 2WD |
Final drive | - |
Steering | hydrostatic power |
Braking system | differential mechanical wet disc |
Cabin type | Two-post foldable ROPS |
Differentiel lock | mechanical rear lock engaged by foot pedal |
System | open center fixed displacement |
Valves | 1 or 2 |
Pump flow | 10.4 gpm or 39.4 lpm |
SVC flow | - |
Steering flow | 5.3 gpm or 20.1 lpm |
Tank capacity | - |
Hydraulic pressure | - |
Max flow | 18.7 gpm or 70.8 lpm |
Drawbar type | - |
Claimed power | - |
Drawbar horsepower | - |
Fuel consumption | - |
Pulling power | - |
Claimed power | 57 hp or 42.5 kW |
Real power | 58.07 hp or 43.3 kW |
Engine @RPM | - |
PTO Clutch | - |
Rear PTO | independent |
Rear PTO RPM | 540 (rpm) |
Front PTO | - |
Front PTO RPM | - |
Mid PTO | - |
Mid PTO RPM | - |
Fuel consumption | 3.4 gal/hour or 12.9 l/hour |
Hitch system | position control and mechanical draft sensing |
Rear hitch | 2/1 |
Rear hitch lift | 3,276 lbs or 1485 kg |
Front hitch | - |
Front hitch lift | - |
Related tractor comparison


Deutz-Fahr DX 3.10 John Deere 8260R


Deutz-Fahr DX 3.10 Mahindra 4525


New Holland Workmaster 65 Kioti DX100


New Holland Workmaster 65 Fendt 927 Vario


New Holland Workmaster 65 Kubota JB17X


New Holland Workmaster 65 Zetor Proxima Power 105
Choose another tractor
Useful links and guides ....
- Deutz-Fahr provided us with the latest version of its DX 3.10 service repair manual
- Find All mechanical and electrical parts and accessories of Deutz-Fahr DX 3.10 farm-tractor here
- Get your New Holland Workmaster 65 manual book version
- Cabine, electrical And mechanical parts for New Holland Workmaster 65 farm-tractor here