Deutz-Fahr DX 3.10 VS Müller TM25 specs comparison
Deutz-Fahr DX 3.10
General Infos| Make | Deutz-Fahr |
| Model | DX 3.10 |
| Country | Germany |
| Production | From 1984 Until 1990 |
| Price | - |
| Tractor type | Utility tractor |
| Fuel | diesel |
| Service repair manual | Deutz-Fahr DX 3.10 Manual |
Dimensions, sizes and tires
| AG front tires | 7.50x16 |
| AG rear tires | 14.9x28 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 5776 lbs or 2619 kg |
| Length | 140.2 inches [356 cm] |
| Width | 82.3 inches [209 cm] |
| Height | 88.5 inches [224 cm] |
| Wheelbase | 82 inches [208 cm] |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | 59 to 75 inches |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 172.50 ci or 2.8 L |
| Cylinders | 3 cylinders |
| Engine power | 46 hp or 34.3 kW |
| Engine RPM | 2150 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | diesel |
| Fuel injection | - |
| Fuel tank size | 19.8 gal or 74.9 L |
| Oil capacity | 8.5 qts or 8.0 L |
| Oil change | - |
| Starter motor | - |
| Starter volts | - |
| Parts And Accessories | Deutz-Fahr DX 3.10 Parts |
| Batteries number | - |
| Batteries voltage | - |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | - |
| Charging system | - |
| Charging Volts | - |
| Charging Amps | - |
| Trans system | Dual-Split |
| Trans type | two-speed power shift |
| Trans gears | 24 forward and 8 reverse |
| Clutch system | dry disc |
| Wheel drive | 4x2 2WD |
| Final drive | - |
| Steering | power |
| Braking system | mechanical drum |
| Cabin type | Four-post ROPS with canopy |
| Differentiel lock | mechanical rear |
| System | open center |
| Valves | 1 to 3 |
| Pump flow | 9.8 gpm or 37.1 lpm |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | 4 gal or 15.1 L |
| Hydraulic pressure | 2538 psi or 175.0 bar |
| Max flow | - |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | - |
| Fuel consumption | - |
| Pulling power | - |
| Claimed power | - |
| Real power | - |
| Engine @RPM | - |
| PTO Clutch | dry disc |
| Rear PTO | independent |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | independent |
| Front PTO RPM | 1000 (rpm) |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | - |
| Hitch system | position and draft control |
| Rear hitch | I |
| Rear hitch lift | 4189 lbs or 1900 kg |
| Front hitch | II |
| Front hitch lift | - |
Müller TM25
General Infos| Make | Müller |
| Model | TM25 |
| Country | - |
| Production | From 1980 Until 1995 |
| Price | - |
| Tractor type | Four wheel Drive (4WD) tractor |
| Fuel | diesel |
| Service repair manual | Müller TM25 Manual |
Dimensions, sizes and tires
| AG front tires | 23.1/18x26 |
| AG rear tires | 23.1/18x26 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 22270 lbs or 10101 kg |
| Length | 279.5 inches [709 cm] |
| Width | 91.3 inches [231 cm] |
| Height | 135.8 inches [344 cm] |
| Wheelbase | 122 inches [309 cm] |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | - |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 855 ci or 14.0 L |
| Cylinders | 6 cylinders |
| Engine power | 235 hp or 175.2 kW |
| Engine RPM | 2100 (rpm) |
| Torque | 679.9 lb-ft or 921.9 Nm | Torque RPM | 1500 (rpm) |
| Fuel type | diesel |
| Fuel injection | direct injection |
| Fuel tank size | 200.8 gal or 760.0 L |
| Oil capacity | 42.3 qts or 40.0 L |
| Oil change | - |
| Starter motor | electric |
| Starter volts | 24 V |
| Parts And Accessories | Müller TM25 Parts |
| Batteries number | 2 |
| Batteries voltage | 12 V |
| Battries Amps | 165 amps |
| Cold Amps | - |
| Ground force | - |
| Charging system | alternator |
| Charging Volts | - |
| Charging Amps | 55 amps |
| Trans system | Eaton |
| Trans type | - |
| Trans gears | 18 forward and 4 reverse |
| Clutch system | - |
| Wheel drive | 4x4 articulated 4WD |
| Final drive | planetary |
| Steering | articulated power |
| Braking system | hydraulic disc |
| Cabin type | Cab standard with air-conditioning |
| Differentiel lock | - |
| System | - |
| Valves | - |
| Pump flow | 29 gpm or 109.8 lpm |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | 31.7 gal or 120.0 L |
| Hydraulic pressure | 2000 psi or 137.9 bar |
| Max flow | - |
| Drawbar type | - |
| Claimed power | 201 hp or 149.9 kW |
| Drawbar horsepower | - |
| Fuel consumption | - |
| Pulling power | - |
| Claimed power | - |
| Real power | - |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | - |
| Rear PTO RPM | - |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | - |
| Hitch system | - |
| Rear hitch | III |
| Rear hitch lift | 15430 lbs or 6999 kg |
| Front hitch | - |
| Front hitch lift | - |
Related tractor comparison
Müller TM25 Iseki TL2300
Müller TM25 IMR Rakovica R 76 Super
Müller TM25 Zetor 4945
Deutz-Fahr DX 3.10 Ford 8100
Deutz-Fahr DX 3.10 Deutz-Fahr DX 160
Deutz-Fahr DX 3.10 John Deere 8850
Choose another tractor
Useful links and guides ....
- Deutz-Fahr provided us with the latest version of its DX 3.10 service repair manual
- Find All mechanical and electrical parts and accessories of Deutz-Fahr DX 3.10 farm-tractor here
- Get your Müller TM25 manual book version
- Cabine, electrical And mechanical parts for Müller TM25 farm-tractor here
