Deutz-Fahr DX 3.10 VS Farmall 200 specs comparison
Deutz-Fahr DX 3.10
General Infos| Make | Deutz-Fahr |
| Model | DX 3.10 |
| Country | Germany |
| Production | From 1984 Until 1990 |
| Price | - |
| Tractor type | Utility tractor |
| Fuel | diesel |
| Service repair manual | Deutz-Fahr DX 3.10 Manual |
Dimensions, sizes and tires
| AG front tires | 7.50x16 |
| AG rear tires | 14.9x28 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 5776 lbs or 2619 kg |
| Length | 140.2 inches [356 cm] |
| Width | 82.3 inches [209 cm] |
| Height | 88.5 inches [224 cm] |
| Wheelbase | 82 inches [208 cm] |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | 59 to 75 inches |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 172.50 ci or 2.8 L |
| Cylinders | 3 cylinders |
| Engine power | 46 hp or 34.3 kW |
| Engine RPM | 2150 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | diesel |
| Fuel injection | - |
| Fuel tank size | 19.8 gal or 74.9 L |
| Oil capacity | 8.5 qts or 8.0 L |
| Oil change | - |
| Starter motor | - |
| Starter volts | - |
| Parts And Accessories | Deutz-Fahr DX 3.10 Parts |
| Batteries number | - |
| Batteries voltage | - |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | - |
| Charging system | - |
| Charging Volts | - |
| Charging Amps | - |
| Trans system | Dual-Split |
| Trans type | two-speed power shift |
| Trans gears | 24 forward and 8 reverse |
| Clutch system | dry disc |
| Wheel drive | 4x2 2WD |
| Final drive | - |
| Steering | power |
| Braking system | mechanical drum |
| Cabin type | Four-post ROPS with canopy |
| Differentiel lock | mechanical rear |
| System | open center |
| Valves | 1 to 3 |
| Pump flow | 9.8 gpm or 37.1 lpm |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | 4 gal or 15.1 L |
| Hydraulic pressure | 2538 psi or 175.0 bar |
| Max flow | - |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | - |
| Fuel consumption | - |
| Pulling power | - |
| Claimed power | - |
| Real power | - |
| Engine @RPM | - |
| PTO Clutch | dry disc |
| Rear PTO | independent |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | independent |
| Front PTO RPM | 1000 (rpm) |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | - |
| Hitch system | position and draft control |
| Rear hitch | I |
| Rear hitch lift | 4189 lbs or 1900 kg |
| Front hitch | II |
| Front hitch lift | - |
Farmall 200
General Infos| Make | Farmall |
| Model | 200 |
| Country | United states |
| Production | From 1954 Until 1956 |
| Price | 1,970 USD |
| Tractor type | - |
| Fuel | gasoline |
| Service repair manual | Farmall 200 Manual |
Dimensions, sizes and tires
| AG front tires | 5.00-15 |
| AG rear tires | 10-36 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 3,541 lbs or 1606 kg |
| Length | - |
| Width | - |
| Height | - |
| Wheelbase | 82.25 inches [208 cm] |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | 48 to 80 inches |
| Front tread size | 6.625 to 12.375 inches |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 122.7 ci or 2.0 L |
| Cylinders | 4 cylinders |
| Engine power | - |
| Engine RPM | 1400 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | gasoline |
| Fuel injection | - |
| Fuel tank size | - |
| Oil capacity | 5 qts or 4.7 L |
| Oil change | - |
| Starter motor | - |
| Starter volts | 6 V |
| Parts And Accessories | Farmall 200 Parts |
| Batteries number | 1 |
| Batteries voltage | 6 V |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | - |
| Charging system | - |
| Charging Volts | - |
| Charging Amps | - |
| Trans system | - |
| Trans type | sliding gear |
| Trans gears | 4 forward and 1 reverse |
| Clutch system | dry disc |
| Wheel drive | 4x2 2WD |
| Final drive | - |
| Steering | manual |
| Braking system | differential mechanical dry disc |
| Cabin type | Open operator station |
| Differentiel lock | - |
| System | - |
| Valves | - |
| Pump flow | - |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | - |
| Hydraulic pressure | - |
| Max flow | - |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | 20.92 hp or 15.6 kW |
| Fuel consumption | - |
| Pulling power | 3,166 lbs or 1436 kg |
| Claimed power | - |
| Real power | - |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | - |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | - |
| Hitch system | - |
| Rear hitch | - |
| Rear hitch lift | - |
| Front hitch | - |
| Front hitch lift | - |
Related tractor comparison
Farmall 200 Allis Chalmers WD45
Deutz-Fahr DX 3.10 John Deere 420
Farmall 200 Ferguson TO-35
Deutz-Fahr DX 3.10 Ford 820
Deutz-Fahr DX 3.10 Minneapolis-Moline 445 Universal
Farmall 200 Massey-Harris Pony 812
Choose another tractor
Useful links and guides ....
- Deutz-Fahr provided us with the latest version of its DX 3.10 service repair manual
- Find All mechanical and electrical parts and accessories of Deutz-Fahr DX 3.10 farm-tractor here
- Get your Farmall 200 manual book version
- Cabine, electrical And mechanical parts for Farmall 200 farm-tractor here
