Allis Chalmers 5040 VS Deutz-Fahr DX 3.10 specs comparison
Allis Chalmers 5040
General Infos| Make | Allis Chalmers |
| Model | 5040 |
| Country | United states |
| Production | From 1976 Until 1980 |
| Price | 9,823 USD |
| Tractor type | Utility tractor |
| Fuel | diesel |
| Service repair manual | Allis Chalmers 5040 Manual |
Dimensions, sizes and tires
| AG front tires | 6.00-16 |
| AG rear tires | 13.6-28 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 3850 lbs or 1746 kg |
| Length | 116 inches [294 cm] |
| Width | 61 inches [154 cm] |
| Height | - |
| Wheelbase | 74.2 inches [188 cm] |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | 52 to 75 inches |
| Front tread size | 51 to 78 inches |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 142.8 ci or 2.3 L |
| Cylinders | 3 cylinders |
| Engine power | - |
| Engine RPM | 2400 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | diesel |
| Fuel injection | direct injection |
| Fuel tank size | 14.25 gal or 53.9 L |
| Oil capacity | 8.3 qts or 7.9 L |
| Oil change | - |
| Starter motor | - |
| Starter volts | 12 V |
| Parts And Accessories | Allis Chalmers 5040 Parts |
| Batteries number | - |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | - |
| Charging system | alternator |
| Charging Volts | - |
| Charging Amps | 30 amps |
| Trans system | partially synchronized |
| Trans type | creeper |
| Trans gears | 12 forward and 3 reverse |
| Clutch system | 279mm dry disc |
| Wheel drive | 4x2 2WD |
| Final drive | - |
| Steering | power |
| Braking system | mechanical band |
| Cabin type | Open operator station |
| Differentiel lock | mechanical rear |
| System | open center |
| Valves | 1 |
| Pump flow | - |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | 4.75 gal or 18.0 L |
| Hydraulic pressure | - |
| Max flow | 5.75 gpm or 21.8 lpm |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | - |
| Fuel consumption | - |
| Pulling power | - |
| Claimed power | 40 hp or 29.8 kW |
| Real power | - |
| Engine @RPM | 540@1970 (rpm) |
| PTO Clutch | - |
| Rear PTO | continuous |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | - |
| Hitch system | position control and top-link draft sensing |
| Rear hitch | II/I |
| Rear hitch lift | 2645 lbs or 1199 kg |
| Front hitch | - |
| Front hitch lift | - |
Deutz-Fahr DX 3.10
General Infos| Make | Deutz-Fahr |
| Model | DX 3.10 |
| Country | Germany |
| Production | From 1984 Until 1990 |
| Price | - |
| Tractor type | Utility tractor |
| Fuel | diesel |
| Service repair manual | Deutz-Fahr DX 3.10 Manual |
Dimensions, sizes and tires
| AG front tires | 7.50x16 |
| AG rear tires | 14.9x28 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 5776 lbs or 2619 kg |
| Length | 140.2 inches [356 cm] |
| Width | 82.3 inches [209 cm] |
| Height | 88.5 inches [224 cm] |
| Wheelbase | 82 inches [208 cm] |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | 59 to 75 inches |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 172.50 ci or 2.8 L |
| Cylinders | 3 cylinders |
| Engine power | 46 hp or 34.3 kW |
| Engine RPM | 2150 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | diesel |
| Fuel injection | - |
| Fuel tank size | 19.8 gal or 74.9 L |
| Oil capacity | 8.5 qts or 8.0 L |
| Oil change | - |
| Starter motor | - |
| Starter volts | - |
| Parts And Accessories | Deutz-Fahr DX 3.10 Parts |
| Batteries number | - |
| Batteries voltage | - |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | - |
| Charging system | - |
| Charging Volts | - |
| Charging Amps | - |
| Trans system | Dual-Split |
| Trans type | two-speed power shift |
| Trans gears | 24 forward and 8 reverse |
| Clutch system | dry disc |
| Wheel drive | 4x2 2WD |
| Final drive | - |
| Steering | power |
| Braking system | mechanical drum |
| Cabin type | Four-post ROPS with canopy |
| Differentiel lock | mechanical rear |
| System | open center |
| Valves | 1 to 3 |
| Pump flow | 9.8 gpm or 37.1 lpm |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | 4 gal or 15.1 L |
| Hydraulic pressure | 2538 psi or 175.0 bar |
| Max flow | - |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | - |
| Fuel consumption | - |
| Pulling power | - |
| Claimed power | - |
| Real power | - |
| Engine @RPM | - |
| PTO Clutch | dry disc |
| Rear PTO | independent |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | independent |
| Front PTO RPM | 1000 (rpm) |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | - |
| Hitch system | position and draft control |
| Rear hitch | I |
| Rear hitch lift | 4189 lbs or 1900 kg |
| Front hitch | II |
| Front hitch lift | - |
Related tractor comparison
Allis Chalmers 5040 Kubota M5030
Allis Chalmers 5040 Iseki TU225 Landhope
Allis Chalmers 5040 International Harvester 5088
Allis Chalmers 5040 John Deere 750
Allis Chalmers 5040 Schluter Compact 1150 TV 6
Allis Chalmers 5040 Deutz-Allis 7085
Choose another tractor
Useful links and guides ....
- Allis Chalmers provided us with the latest version of its 5040 service repair manual
- Find All mechanical and electrical parts and accessories of Allis Chalmers 5040 farm-tractor here
- Get your Deutz-Fahr DX 3.10 manual book version
- Cabine, electrical And mechanical parts for Deutz-Fahr DX 3.10 farm-tractor here
