Allis Chalmers 160 VS Deutz-Fahr DX 3.10 specs comparison
Allis Chalmers 160
General Infos| Make | Allis Chalmers |
| Model | 160 |
| Country | United states |
| Production | From 1970 Until 1975 |
| Price | 6,215 USD |
| Tractor type | Farm/Agricultural tractor |
| Fuel | diesel |
| Service repair manual | Allis Chalmers 160 Manual |
Dimensions, sizes and tires
| AG front tires | 6.00-16 |
| AG rear tires | 13.6-28 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 4,250 lbs or 1927 kg |
| Length | 144 inches [365 cm] |
| Width | - |
| Height | - |
| Wheelbase | 76 inches [193 cm] |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | - |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 152.7 ci or 2.5 L |
| Cylinders | 3 cylinders |
| Engine power | 40 hp or 29.8 kW |
| Engine RPM | 2250 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | diesel |
| Fuel injection | - |
| Fuel tank size | 13.5 gal or 51.1 L |
| Oil capacity | 6.5 qts or 6.2 L |
| Oil change | - |
| Starter motor | - |
| Starter volts | 12 V |
| Parts And Accessories | Allis Chalmers 160 Parts |
| Batteries number | 1 |
| Batteries voltage | 12 V |
| Battries Amps | 95 amps |
| Cold Amps | - |
| Ground force | negative |
| Charging system | Delco-Remy |
| Charging Volts | - |
| Charging Amps | - |
| Trans system | - |
| Trans type | partial synchronized |
| Trans gears | 6 forward and 1 reverse |
| Clutch system | - |
| Wheel drive | 4x2 2WD |
| Final drive | - |
| Steering | hydrostatic power |
| Braking system | differential mechanical dry disc |
| Cabin type | - |
| Differentiel lock | - |
| System | - |
| Valves | - |
| Pump flow | 6.7 gpm or 25.4 lpm |
| SVC flow | - |
| Steering flow | 7.5 gpm or 28.4 lpm |
| Tank capacity | 7.25 gal or 27.4 L |
| Hydraulic pressure | 2300 psi or 158.6 bar |
| Max flow | - |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | 36.71 hp or 27.4 kW |
| Fuel consumption | 2.8 gal/hour or 10.6 l/hour |
| Pulling power | - |
| Claimed power | - |
| Real power | 39.77 hp or 29.7 kW |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | live |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | 2.6 gal/hour or 9.8 l/hour |
| Hitch system | - |
| Rear hitch | II |
| Rear hitch lift | - |
| Front hitch | - |
| Front hitch lift | - |
Deutz-Fahr DX 3.10
General Infos| Make | Deutz-Fahr |
| Model | DX 3.10 |
| Country | Germany |
| Production | From 1984 Until 1990 |
| Price | - |
| Tractor type | Utility tractor |
| Fuel | diesel |
| Service repair manual | Deutz-Fahr DX 3.10 Manual |
Dimensions, sizes and tires
| AG front tires | 7.50x16 |
| AG rear tires | 14.9x28 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 5776 lbs or 2619 kg |
| Length | 140.2 inches [356 cm] |
| Width | 82.3 inches [209 cm] |
| Height | 88.5 inches [224 cm] |
| Wheelbase | 82 inches [208 cm] |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | 59 to 75 inches |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 172.50 ci or 2.8 L |
| Cylinders | 3 cylinders |
| Engine power | 46 hp or 34.3 kW |
| Engine RPM | 2150 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | diesel |
| Fuel injection | - |
| Fuel tank size | 19.8 gal or 74.9 L |
| Oil capacity | 8.5 qts or 8.0 L |
| Oil change | - |
| Starter motor | - |
| Starter volts | - |
| Parts And Accessories | Deutz-Fahr DX 3.10 Parts |
| Batteries number | - |
| Batteries voltage | - |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | - |
| Charging system | - |
| Charging Volts | - |
| Charging Amps | - |
| Trans system | Dual-Split |
| Trans type | two-speed power shift |
| Trans gears | 24 forward and 8 reverse |
| Clutch system | dry disc |
| Wheel drive | 4x2 2WD |
| Final drive | - |
| Steering | power |
| Braking system | mechanical drum |
| Cabin type | Four-post ROPS with canopy |
| Differentiel lock | mechanical rear |
| System | open center |
| Valves | 1 to 3 |
| Pump flow | 9.8 gpm or 37.1 lpm |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | 4 gal or 15.1 L |
| Hydraulic pressure | 2538 psi or 175.0 bar |
| Max flow | - |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | - |
| Fuel consumption | - |
| Pulling power | - |
| Claimed power | - |
| Real power | - |
| Engine @RPM | - |
| PTO Clutch | dry disc |
| Rear PTO | independent |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | independent |
| Front PTO RPM | 1000 (rpm) |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | - |
| Hitch system | position and draft control |
| Rear hitch | I |
| Rear hitch lift | 4189 lbs or 1900 kg |
| Front hitch | II |
| Front hitch lift | - |
Related tractor comparison
Deutz-Fahr DX 3.10 Mitsubishi MT180
Deutz-Fahr DX 3.10 CaseIH 9180
Allis Chalmers 160 Steyr 8150
Allis Chalmers 160 Mitsubishi MT21
Allis Chalmers 160 CaseIH 585
Allis Chalmers 160 Steiger Cougar KR-1280
Choose another tractor
Useful links and guides ....
- Allis Chalmers provided us with the latest version of its 160 service repair manual
- Find All mechanical and electrical parts and accessories of Allis Chalmers 160 farm-tractor here
- Get your Deutz-Fahr DX 3.10 manual book version
- Cabine, electrical And mechanical parts for Deutz-Fahr DX 3.10 farm-tractor here
