Steiger Panther IV KM-325 VS New Holland Workmaster 40 specs comparison
Steiger Panther IV KM-325
General Infos| Make | Steiger |
| Model | Panther IV KM-325 |
| Country | United states |
| Production | From 1983 Until 1985 |
| Price | - |
| Tractor type | Four wheel Drive (4WD) tractor |
| Fuel | diesel |
| Service repair manual | Steiger Panther IV KM-325 Manual |
Dimensions, sizes and tires
| AG front tires | 20.8x34 |
| AG rear tires | 20.8x34 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 26653 lbs or 12089 kg |
| Length | 253.6 inches [644 cm] |
| Width | 96 inches [243 cm] |
| Height | 134.8 inches [342 cm] |
| Wheelbase | 129 inches [327 cm] |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | 79 to 136.3 inches |
| Front tread size | 79 to 136.3 inches |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 855 ci or 14.0 L |
| Cylinders | 6 cylinders |
| Engine power | 325 hp or 242.4 kW |
| Engine RPM | 2100 (rpm) |
| Torque | 1080 lb-ft or 1464.5 Nm | Torque RPM | 1400 (rpm) |
| Fuel type | diesel |
| Fuel injection | - |
| Fuel tank size | 267 gal or 1010.6 L |
| Oil capacity | 42 qts or 39.7 L |
| Oil change | - |
| Starter motor | - |
| Starter volts | 12 V |
| Parts And Accessories | Steiger Panther IV KM-325 Parts |
| Batteries number | 3 |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | - |
| Charging system | alternator |
| Charging Volts | - |
| Charging Amps | 90 amps |
| Trans system | Spicer SST 1010 |
| Trans type | Constant mesh 10-speed transmission |
| Trans gears | 20 forward and 4 reverse |
| Clutch system | - |
| Wheel drive | 4x4 articulated 4WD |
| Final drive | - |
| Steering | articulated power |
| Braking system | hydraulic disc |
| Cabin type | Steiger Safari Cab standard with air-conditioning |
| Differentiel lock | - |
| System | open center load sensing |
| Valves | 3 to 5 |
| Pump flow | 28.6 gpm or 108.3 lpm |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | - |
| Hydraulic pressure | 2250 psi or 155.1 bar |
| Max flow | - |
| Drawbar type | - |
| Claimed power | 286 hp or 213.3 kW |
| Drawbar horsepower | 276.11 hp or 205.9 kW |
| Fuel consumption | 17.2 gal/hour or 65.1 l/hour |
| Pulling power | 32565 lbs or 14771 kg |
| Claimed power | - |
| Real power | - |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | - |
| Rear PTO RPM | - |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | - |
| Hitch system | - |
| Rear hitch | III |
| Rear hitch lift | - |
| Front hitch | - |
| Front hitch lift | - |
New Holland Workmaster 40
General Infos| Make | New Holland |
| Model | Workmaster 40 |
| Country | United states |
| Production | From 2013 Until 2015 |
| Price | - |
| Tractor type | Compact Utility tractor |
| Fuel | diesel |
| Service repair manual | New Holland Workmaster 40 Manual |
Dimensions, sizes and tires
| AG front tires | - |
| AG rear tires | - |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 2900 lbs or 1315 kg |
| Length | 117.7 inches [298 cm] |
| Width | 66.5 inches [168 cm] |
| Height | 87.7 inches [222 cm] |
| Wheelbase | - |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | 50.5 inches |
| Front tread size | 45.6 inches |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 122 ci or 2.0 L |
| Cylinders | 3 cylinders |
| Engine power | 38 hp or 28.3 kW |
| Engine RPM | 2600 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | diesel |
| Fuel injection | - |
| Fuel tank size | 7.4 gal or 28.0 L |
| Oil capacity | - |
| Oil change | - |
| Starter motor | electric |
| Starter volts | 12 V |
| Parts And Accessories | New Holland Workmaster 40 Parts |
| Batteries number | 1 |
| Batteries voltage | 12 V |
| Battries Amps | 80 amps |
| Cold Amps | 660 |
| Ground force | negative |
| Charging system | alternator |
| Charging Volts | - |
| Charging Amps | 50 amps |
| Trans system | - |
| Trans type | hydrostatic |
| Trans gears | infinite (3-range) forward and reverse |
| Clutch system | - |
| Wheel drive | 4x4 MFWD 4WD |
| Final drive | - |
| Steering | hydrostatic power |
| Braking system | wet disc |
| Cabin type | Two-post foldable ROPS |
| Differentiel lock | mechanical rear |
| System | open center gear pump |
| Valves | - |
| Pump flow | 8.2 gpm or 31.0 lpm |
| SVC flow | - |
| Steering flow | 4.8 gpm or 18.2 lpm |
| Tank capacity | - |
| Hydraulic pressure | - |
| Max flow | 13 gpm or 49.2 lpm |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | - |
| Fuel consumption | - |
| Pulling power | - |
| Claimed power | 31.2 hp or 23.3 kW |
| Real power | - |
| Engine @RPM | - |
| PTO Clutch | electro-hydraulic |
| Rear PTO | independent |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | independent |
| Mid PTO RPM | 2000 (rpm) |
| Fuel consumption | - |
| Hitch system | - |
| Rear hitch | I |
| Rear hitch lift | 1807 lbs or 819 kg |
| Front hitch | - |
| Front hitch lift | - |
Related tractor comparison
Steiger Panther IV KM-325 Massey Ferguson 4708
Steiger Panther IV KM-325 CaseIH Puma 165
Steiger Panther IV KM-325 Kioti CS2610
New Holland Workmaster 40 Chery RA1604
Steiger Panther IV KM-325 Massey Ferguson 7720
New Holland Workmaster 40 Deutz-Fahr 6130.4 TTV
Choose another tractor
Useful links and guides ....
- Steiger provided us with the latest version of its Panther IV KM-325 service repair manual
- Find All mechanical and electrical parts and accessories of Steiger Panther IV KM-325 farm-tractor here
- Get your New Holland Workmaster 40 manual book version
- Cabine, electrical And mechanical parts for New Holland Workmaster 40 farm-tractor here
