Steiger Panther IV CM-360 VS New Holland Workmaster 40 specs comparison
Steiger Panther IV CM-360
General Infos| Make | Steiger |
| Model | Panther IV CM-360 |
| Country | United states |
| Production | From 1983 Until 1985 |
| Price | - |
| Tractor type | Four wheel Drive (4WD) tractor |
| Fuel | diesel |
| Service repair manual | Steiger Panther IV CM-360 Manual |
Dimensions, sizes and tires
| AG front tires | 20.8x34 |
| AG rear tires | 20.8x34 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 26903 lbs or 12203 kg |
| Length | 253.6 inches [644 cm] |
| Width | 96 inches [243 cm] |
| Height | 134.8 inches [342 cm] |
| Wheelbase | 129 inches [327 cm] |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | 79 to 136.3 inches |
| Front tread size | 79 to 136.3 inches |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 893 ci or 14.6 L |
| Cylinders | 6 cylinders |
| Engine power | 360 hp or 268.5 kW |
| Engine RPM | 2100 (rpm) |
| Torque | 1175 lb-ft or 1593.3 Nm | Torque RPM | 1200 (rpm) |
| Fuel type | diesel |
| Fuel injection | - |
| Fuel tank size | 267 gal or 1010.6 L |
| Oil capacity | 36 qts or 34.1 L |
| Oil change | - |
| Starter motor | - |
| Starter volts | 12 V |
| Parts And Accessories | Steiger Panther IV CM-360 Parts |
| Batteries number | 3 |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | - |
| Charging system | alternator |
| Charging Volts | - |
| Charging Amps | 90 amps |
| Trans system | Spicer SST 1010 |
| Trans type | Constant mesh 10-speed transmission |
| Trans gears | 20 forward and 4 reverse |
| Clutch system | - |
| Wheel drive | 4x4 articulated 4WD |
| Final drive | - |
| Steering | articulated power |
| Braking system | hydraulic disc |
| Cabin type | Steiger Safari Cab standard with air-conditioning |
| Differentiel lock | - |
| System | open center load sensing |
| Valves | 3 to 5 |
| Pump flow | 31 gpm or 117.3 lpm |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | - |
| Hydraulic pressure | 2250 psi or 155.1 bar |
| Max flow | - |
| Drawbar type | - |
| Claimed power | 301 hp or 224.5 kW |
| Drawbar horsepower | - |
| Fuel consumption | - |
| Pulling power | - |
| Claimed power | - |
| Real power | - |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | - |
| Rear PTO RPM | - |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | - |
| Hitch system | - |
| Rear hitch | III |
| Rear hitch lift | - |
| Front hitch | - |
| Front hitch lift | - |
New Holland Workmaster 40
General Infos| Make | New Holland |
| Model | Workmaster 40 |
| Country | United states |
| Production | From 2017 |
| Price | - |
| Tractor type | Compact Utility tractor |
| Fuel | diesel |
| Service repair manual | New Holland Workmaster 40 Manual |
Dimensions, sizes and tires
| AG front tires | 7x14 |
| AG rear tires | 11.2x24 |
| Lawn front tires | 25x8.50-14 |
| Lawn rear tires | 25x8.50-14 |
| Indus front tires | 25x8.5-14 |
| Indus rear tires | 43x16.00-20 |
| Weight | 3067 lbs or 1391 kg |
| Length | 121 inches [307 cm] |
| Width | 66.5 inches [168 cm] |
| Height | 87.7 inches [222 cm] |
| Wheelbase | 67.5 inches [171 cm] |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | - |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 114.7 ci or 1.9 L |
| Cylinders | 3 cylinders |
| Engine power | 40 hp or 29.8 kW |
| Engine RPM | 2600 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | diesel |
| Fuel injection | electronic common rail direct injection |
| Fuel tank size | 7.4 gal or 28.0 L |
| Oil capacity | - |
| Oil change | - |
| Starter motor | electric |
| Starter volts | 12 V |
| Parts And Accessories | New Holland Workmaster 40 Parts |
| Batteries number | 1 |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | negative |
| Charging system | alternator |
| Charging Volts | - |
| Charging Amps | 70 amps |
| Trans system | - |
| Trans type | hydrostatic |
| Trans gears | infinite (3-range) forward and reverse |
| Clutch system | - |
| Wheel drive | 4x4 MFWD 4WD |
| Final drive | - |
| Steering | power |
| Braking system | wet disc |
| Cabin type | Two-post folding ROPS |
| Differentiel lock | - |
| System | open center |
| Valves | 1 or 2 |
| Pump flow | 8.2 gpm or 31.0 lpm |
| SVC flow | - |
| Steering flow | 5.3 gpm or 20.1 lpm |
| Tank capacity | - |
| Hydraulic pressure | - |
| Max flow | 13.5 gpm or 51.1 lpm |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | - |
| Fuel consumption | - |
| Pulling power | - |
| Claimed power | 32 hp or 23.9 kW |
| Real power | - |
| Engine @RPM | - |
| PTO Clutch | electro-hydraulic |
| Rear PTO | independent |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | - |
| Hitch system | position control |
| Rear hitch | I |
| Rear hitch lift | 1808 lbs or 820 kg |
| Front hitch | - |
| Front hitch lift | - |
Related tractor comparison
New Holland Workmaster 40 John Deere 6175M
New Holland Workmaster 40 TYM T754
Steiger Panther IV CM-360 Versatile 335
New Holland Workmaster 40 Kubota M100G
Steiger Panther IV CM-360 Kubota M7132
New Holland Workmaster 40 Kubota B1161
Choose another tractor
Useful links and guides ....
- Steiger provided us with the latest version of its Panther IV CM-360 service repair manual
- Find All mechanical and electrical parts and accessories of Steiger Panther IV CM-360 farm-tractor here
- Get your New Holland Workmaster 40 manual book version
- Cabine, electrical And mechanical parts for New Holland Workmaster 40 farm-tractor here
