Steiger Panther III ST-350 VS Holder Cultitrac A12 specs comparison
Steiger Panther III ST-350
General Infos| Make | Steiger |
| Model | Panther III ST-350 |
| Country | United states |
| Production | From 1977 Until 1981 |
| Price | 94,700 USD |
| Tractor type | Four wheel Drive (4WD) tractor |
| Fuel | diesel |
| Service repair manual | Steiger Panther III ST-350 Manual |
Dimensions, sizes and tires
| AG front tires | 20.8-34 |
| AG rear tires | 20.8-34 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 26,700 lbs or 12111 kg |
| Length | 252 inches [640 cm] |
| Width | 96 inches [243 cm] (tractor body) |
| Height | - |
| Wheelbase | 128 inches [325 cm] |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | - |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 903 ci or 14.8 L |
| Cylinders | 8 cylinders |
| Engine power | 350 hp or 261.0 kW |
| Engine RPM | 2600 (rpm) |
| Torque | 848 lb-ft or 1149.9 Nm | Torque RPM | 1800 (rpm) |
| Fuel type | diesel |
| Fuel injection | - |
| Fuel tank size | 267 gal or 1010.6 L |
| Oil capacity | 38 qts or 36.0 L |
| Oil change | - |
| Starter motor | - |
| Starter volts | 12 V |
| Parts And Accessories | Steiger Panther III ST-350 Parts |
| Batteries number | 2 |
| Batteries voltage | 12 V |
| Battries Amps | 208 amps |
| Cold Amps | - |
| Ground force | negative |
| Charging system | alternator |
| Charging Volts | - |
| Charging Amps | 90 amps |
| Trans system | Spicer SST 1010 |
| Trans type | - |
| Trans gears | 20 forward and 4 reverse |
| Clutch system | 394mm dry disc |
| Wheel drive | 4x4 articulated 4WD |
| Final drive | outboard planetary |
| Steering | hydrostatic power |
| Braking system | hydraulic disc |
| Cabin type | Safari Cab standard with heat and air-conditioning |
| Differentiel lock | - |
| System | open center |
| Valves | 4 |
| Pump flow | 30.1 gpm or 113.9 lpm |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | 33 gal or 124.9 L |
| Hydraulic pressure | 2250 psi or 155.1 bar |
| Max flow | - |
| Drawbar type | - |
| Claimed power | 311 hp or 231.9 kW |
| Drawbar horsepower | - |
| Fuel consumption | - |
| Pulling power | - |
| Claimed power | - |
| Real power | - |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | - |
| Rear PTO RPM | - |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | - |
| Hitch system | - |
| Rear hitch | 3 |
| Rear hitch lift | - |
| Front hitch | - |
| Front hitch lift | - |
Holder Cultitrac A12
General Infos| Make | Holder |
| Model | Cultitrac A12 |
| Country | Germany |
| Production | From 1956 |
| Price | - |
| Tractor type | - |
| Fuel | diesel |
| Service repair manual | Holder Cultitrac A12 Manual |
Dimensions, sizes and tires
| AG front tires | 5.50x16 |
| AG rear tires | 5.50x16 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 1500 lbs or 680 kg |
| Length | 80 inches [203 cm] |
| Width | 30 inches [76 cm] |
| Height | - |
| Wheelbase | 45 inches [114 cm] |
| Ground clearance | 9.5 inches [24 cm] |
| Turning radius | 6 feet [1.8 m] |
| Rear tread size | - |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 36.9 ci or 0.6 L |
| Cylinders | 1 cylinders |
| Engine power | 12 hp or 8.9 kW |
| Engine RPM | 2200 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | diesel |
| Fuel injection | direct injection |
| Fuel tank size | 2.5 gal or 9.5 L |
| Oil capacity | - |
| Oil change | - |
| Starter motor | - |
| Starter volts | 12 V |
| Parts And Accessories | Holder Cultitrac A12 Parts |
| Batteries number | - |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | - |
| Charging system | - |
| Charging Volts | - |
| Charging Amps | - |
| Trans system | - |
| Trans type | - |
| Trans gears | 6 forward and 3 reverse |
| Clutch system | dry disc |
| Wheel drive | 4x4 articulated 4WD |
| Final drive | - |
| Steering | - |
| Braking system | drum |
| Cabin type | Open operator station |
| Differentiel lock | - |
| System | open center |
| Valves | - |
| Pump flow | 2.6 gpm or 9.8 lpm |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | 1 gal or 3.8 L |
| Hydraulic pressure | 1850 psi or 127.6 bar |
| Max flow | - |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | - |
| Fuel consumption | - |
| Pulling power | - |
| Claimed power | - |
| Real power | - |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | independent |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | - |
| Hitch system | - |
| Rear hitch | - |
| Rear hitch lift | - |
| Front hitch | - |
| Front hitch lift | - |
Related tractor comparison
Steiger Panther III ST-350 J.I. Case 611-B
Holder Cultitrac A12 McCormick-Deering AW-7
Holder Cultitrac A12 Lanz Bulldog D6006
Holder Cultitrac A12 David Brown 30TD
Holder Cultitrac A12 Ford 771
Steiger Panther III ST-350 John Deere 320
Choose another tractor
Useful links and guides ....
- Steiger provided us with the latest version of its Panther III ST-350 service repair manual
- Find All mechanical and electrical parts and accessories of Steiger Panther III ST-350 farm-tractor here
- Get your Holder Cultitrac A12 manual book version
- Cabine, electrical And mechanical parts for Holder Cultitrac A12 farm-tractor here
