Steiger Panther III ST-325 VS Deutz-Fahr DX 8.30 specs comparison
Steiger Panther III ST-325
General Infos| Make | Steiger |
| Model | Panther III ST-325 |
| Country | United states |
| Production | From 1976 Until 1983 |
| Price | 103,000 USD |
| Tractor type | Four wheel Drive (4WD) tractor |
| Fuel | diesel |
| Service repair manual | Steiger Panther III ST-325 Manual |
Dimensions, sizes and tires
| AG front tires | 23.1-34 |
| AG rear tires | 23.1-34 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 26,900 lbs or 12201 kg |
| Length | 252 inches [640 cm] |
| Width | 96 inches [243 cm] (tractor body) |
| Height | - |
| Wheelbase | 128 inches [325 cm] |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | - |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 893 ci or 14.6 L |
| Cylinders | 6 cylinders |
| Engine power | 325 hp or 242.4 kW |
| Engine RPM | 2100 (rpm) |
| Torque | 1015 lb-ft or 1376.3 Nm | Torque RPM | 1200 (rpm) |
| Fuel type | diesel |
| Fuel injection | - |
| Fuel tank size | 267 gal or 1010.6 L |
| Oil capacity | 36 qts or 34.1 L |
| Oil change | - |
| Starter motor | - |
| Starter volts | 12 V |
| Parts And Accessories | Steiger Panther III ST-325 Parts |
| Batteries number | 2 |
| Batteries voltage | 12 V |
| Battries Amps | 208 amps |
| Cold Amps | - |
| Ground force | negative |
| Charging system | alternator |
| Charging Volts | - |
| Charging Amps | 90 amps |
| Trans system | Dana-Spicer 1010-3B |
| Trans type | - |
| Trans gears | 20 forward and 4 reverse |
| Clutch system | 393.7mm dry disc |
| Wheel drive | 4x4 articulated 4WD |
| Final drive | outboard planetary |
| Steering | hydrostatic power |
| Braking system | hydraulic disc |
| Cabin type | Safari Cab standard with heat and air-conditioning |
| Differentiel lock | - |
| System | open center |
| Valves | 3 to 5 |
| Pump flow | 31.9 gpm or 120.7 lpm |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | - |
| Hydraulic pressure | 2250 psi or 155.1 bar |
| Max flow | - |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | 269.86 hp or 201.2 kW |
| Fuel consumption | 18.2 gal/hour or 68.9 l/hour |
| Pulling power | 28,189 lbs or 12786 kg |
| Claimed power | - |
| Real power | - |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | - |
| Rear PTO RPM | - |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | - |
| Hitch system | - |
| Rear hitch | 3 |
| Rear hitch lift | - |
| Front hitch | - |
| Front hitch lift | - |
Deutz-Fahr DX 8.30
General Infos| Make | Deutz-Fahr |
| Model | DX 8.30 |
| Country | Germany |
| Production | From 1983 Until 1988 |
| Price | - |
| Tractor type | Row Crop tractor |
| Fuel | diesel |
| Service repair manual | Deutz-Fahr DX 8.30 Manual |
Dimensions, sizes and tires
| AG front tires | 18.4-34 |
| AG rear tires | 20.8R42 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 20396 lbs or 9251 kg |
| Length | 213.8 inches [543 cm] |
| Width | - |
| Height | 125.6 inches [319 cm] |
| Wheelbase | 118.1 inches [299 cm] |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | - |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 584.1 ci or 9.6 L |
| Cylinders | 6 cylinders |
| Engine power | 220 hp or 164.1 kW |
| Engine RPM | 2200 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | diesel |
| Fuel injection | - |
| Fuel tank size | 22.5 gal or 85.2 L |
| Oil capacity | - |
| Oil change | - |
| Starter motor | - |
| Starter volts | - |
| Parts And Accessories | Deutz-Fahr DX 8.30 Parts |
| Batteries number | - |
| Batteries voltage | - |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | - |
| Charging system | - |
| Charging Volts | - |
| Charging Amps | - |
| Trans system | - |
| Trans type | - |
| Trans gears | 18 forward and 6 reverse |
| Clutch system | - |
| Wheel drive | 4x4 MFWD 4WD |
| Final drive | - |
| Steering | hydrostatic power |
| Braking system | wet disc |
| Cabin type | Cab standard |
| Differentiel lock | - |
| System | - |
| Valves | - |
| Pump flow | 21.4 gpm or 81.0 lpm |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | - |
| Hydraulic pressure | - |
| Max flow | - |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | - |
| Fuel consumption | - |
| Pulling power | - |
| Claimed power | 190 hp or 141.7 kW |
| Real power | - |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | - |
| Rear PTO RPM | 1000 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | - |
| Hitch system | - |
| Rear hitch | - |
| Rear hitch lift | 17970 lbs or 8151 kg |
| Front hitch | - |
| Front hitch lift | - |
Related tractor comparison
Steiger Panther III ST-325 Kubota B8200
Deutz-Fahr DX 8.30 Fiat 666
Deutz-Fahr DX 8.30 J.I. Case 1690
Deutz-Fahr DX 8.30 CaseIH 685
Steiger Panther III ST-325 John Deere 3140
Deutz-Fahr DX 8.30 Müller TM31
Choose another tractor
Useful links and guides ....
- Steiger provided us with the latest version of its Panther III ST-325 service repair manual
- Find All mechanical and electrical parts and accessories of Steiger Panther III ST-325 farm-tractor here
- Get your Deutz-Fahr DX 8.30 manual book version
- Cabine, electrical And mechanical parts for Deutz-Fahr DX 8.30 farm-tractor here
