Steiger Panther III PTA-325 VS Marshall 802 specs comparison
Steiger Panther III PTA-325
General Infos| Make | Steiger |
| Model | Panther III PTA-325 |
| Country | United states |
| Production | From 1980 Until 1982 |
| Price | - |
| Tractor type | Four wheel Drive (4WD) tractor |
| Fuel | diesel |
| Service repair manual | Steiger Panther III PTA-325 Manual |
Dimensions, sizes and tires
| AG front tires | 18.4x30 |
| AG rear tires | 18.4x30 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 29605 lbs or 13428 kg |
| Length | 264.5 inches [671 cm] |
| Width | 52 inches [132 cm] |
| Height | 134.7 inches [342 cm] |
| Wheelbase | 132.5 inches [336 cm] |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | - |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 893 ci or 14.6 L |
| Cylinders | 6 cylinders |
| Engine power | 325 hp or 242.4 kW |
| Engine RPM | 2100 (rpm) |
| Torque | 1015 lb-ft or 1376.3 Nm | Torque RPM | 1200 (rpm) |
| Fuel type | diesel |
| Fuel injection | direct injection |
| Fuel tank size | 225 gal or 851.6 L |
| Oil capacity | 36 qts or 34.1 L |
| Oil change | - |
| Starter motor | - |
| Starter volts | 12 V |
| Parts And Accessories | Steiger Panther III PTA-325 Parts |
| Batteries number | 4 |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | 475 |
| Ground force | negative |
| Charging system | Delco-Remy alternator |
| Charging Volts | - |
| Charging Amps | 90 amps |
| Trans system | Allison HT 754 |
| Trans type | power shift with torque converter |
| Trans gears | 10 forward and 2 reverse |
| Clutch system | - |
| Wheel drive | 4x4 articulated 4WD |
| Final drive | outboard planetary |
| Steering | articulated power |
| Braking system | hydraulic disc |
| Cabin type | Safari Cab standard with air-conditioning |
| Differentiel lock | - |
| System | open center |
| Valves | 3 to 5 |
| Pump flow | 29.3 gpm or 110.9 lpm |
| SVC flow | 8 gpm or 30.3 lpm |
| Steering flow | - |
| Tank capacity | 22 gal or 83.3 L |
| Hydraulic pressure | 2250 psi or 155.1 bar |
| Max flow | - |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | - |
| Fuel consumption | - |
| Pulling power | - |
| Claimed power | - |
| Real power | - |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | - |
| Rear PTO RPM | - |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | - |
| Hitch system | - |
| Rear hitch | III |
| Rear hitch lift | - |
| Front hitch | - |
| Front hitch lift | - |
Marshall 802
General Infos| Make | Marshall |
| Model | 802 |
| Country | United states |
| Production | From 1982 Until 1984 |
| Price | 20,500 USD |
| Tractor type | Utility tractor |
| Fuel | diesel |
| Service repair manual | Marshall 802 Manual |
Dimensions, sizes and tires
| AG front tires | 7.50x16 |
| AG rear tires | 14.00x34 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 6550 lbs or 2971 kg |
| Length | - |
| Width | - |
| Height | - |
| Wheelbase | - |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | - |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 230 ci or 3.8 L |
| Cylinders | 4 cylinders |
| Engine power | 82 hp or 61.1 kW |
| Engine RPM | 2200 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | diesel |
| Fuel injection | - |
| Fuel tank size | - |
| Oil capacity | - |
| Oil change | - |
| Starter motor | - |
| Starter volts | 12 V |
| Parts And Accessories | Marshall 802 Parts |
| Batteries number | - |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | - |
| Charging system | alternator |
| Charging Volts | - |
| Charging Amps | 36 amps |
| Trans system | - |
| Trans type | synchromesh |
| Trans gears | 9 forward and 3 reverse |
| Clutch system | 305mm hydraulic dry disc |
| Wheel drive | 4x2 2WD |
| Final drive | spur gear |
| Steering | power |
| Braking system | hydraulic wet disc |
| Cabin type | Cab standard with heat |
| Differentiel lock | mechanical rear |
| System | - |
| Valves | - |
| Pump flow | 14.5 gpm or 54.9 lpm |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | - |
| Hydraulic pressure | 2600 psi or 179.3 bar |
| Max flow | - |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | - |
| Fuel consumption | - |
| Pulling power | - |
| Claimed power | 74 hp or 55.2 kW |
| Real power | - |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | independent |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | - |
| Hitch system | position and draft control |
| Rear hitch | II |
| Rear hitch lift | 5200 lbs or 2358 kg |
| Front hitch | - |
| Front hitch lift | - |
Related tractor comparison
Marshall 802 Ursus 1222
Steiger Panther III PTA-325 Valmet 705
Marshall 802 Steiger Panther CP-1400
Marshall 802 Ford 4110
Marshall 802 International Harvester 785
Marshall 802 Ford 1500
Choose another tractor
Useful links and guides ....
- Steiger provided us with the latest version of its Panther III PTA-325 service repair manual
- Find All mechanical and electrical parts and accessories of Steiger Panther III PTA-325 farm-tractor here
- Get your Marshall 802 manual book version
- Cabine, electrical And mechanical parts for Marshall 802 farm-tractor here
