Steiger Bearcat IV KM-225 VS Holder Cultitrac A12 specs comparison
Steiger Bearcat IV KM-225
General Infos| Make | Steiger |
| Model | Bearcat IV KM-225 |
| Country | United states |
| Production | From 1983 Until 1985 |
| Price | - |
| Tractor type | Four wheel Drive (4WD) tractor |
| Fuel | diesel |
| Service repair manual | Steiger Bearcat IV KM-225 Manual |
Dimensions, sizes and tires
| AG front tires | 23.1x34 |
| AG rear tires | 23.1x34 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 24411 lbs or 11072 kg |
| Length | 253.6 inches [644 cm] |
| Width | 96 inches [243 cm] |
| Height | 134.8 inches [342 cm] |
| Wheelbase | 129 inches [327 cm] |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | - |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 611 ci or 10.0 L |
| Cylinders | 6 cylinders |
| Engine power | 225 hp or 167.8 kW |
| Engine RPM | 2100 (rpm) |
| Torque | 732 lb-ft or 992.6 Nm | Torque RPM | 1300 (rpm) |
| Fuel type | diesel |
| Fuel injection | - |
| Fuel tank size | 267 gal or 1010.6 L |
| Oil capacity | 36 qts or 34.1 L |
| Oil change | - |
| Starter motor | - |
| Starter volts | 12 V |
| Parts And Accessories | Steiger Bearcat IV KM-225 Parts |
| Batteries number | 3 |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | - |
| Charging system | alternator |
| Charging Volts | - |
| Charging Amps | 90 amps |
| Trans system | Spicer SST1010 |
| Trans type | constant mesh gear |
| Trans gears | 20 forward and 4 reverse |
| Clutch system | - |
| Wheel drive | 4x4 articulated 4WD |
| Final drive | outboard planetary |
| Steering | articulated power |
| Braking system | hydraulic disc |
| Cabin type | Steiger Safari Cab standard with air-conditioning |
| Differentiel lock | - |
| System | open center |
| Valves | 3 to 5 |
| Pump flow | 30 gpm or 113.6 lpm |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | - |
| Hydraulic pressure | 2250 psi or 155.1 bar |
| Max flow | - |
| Drawbar type | - |
| Claimed power | 190 hp or 141.7 kW |
| Drawbar horsepower | - |
| Fuel consumption | - |
| Pulling power | - |
| Claimed power | - |
| Real power | - |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | - |
| Rear PTO RPM | - |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | - |
| Hitch system | - |
| Rear hitch | III |
| Rear hitch lift | - |
| Front hitch | - |
| Front hitch lift | - |
Holder Cultitrac A12
General Infos| Make | Holder |
| Model | Cultitrac A12 |
| Country | Germany |
| Production | From 1956 |
| Price | - |
| Tractor type | - |
| Fuel | diesel |
| Service repair manual | Holder Cultitrac A12 Manual |
Dimensions, sizes and tires
| AG front tires | 5.50x16 |
| AG rear tires | 5.50x16 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 1500 lbs or 680 kg |
| Length | 80 inches [203 cm] |
| Width | 30 inches [76 cm] |
| Height | - |
| Wheelbase | 45 inches [114 cm] |
| Ground clearance | 9.5 inches [24 cm] |
| Turning radius | 6 feet [1.8 m] |
| Rear tread size | - |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 36.9 ci or 0.6 L |
| Cylinders | 1 cylinders |
| Engine power | 12 hp or 8.9 kW |
| Engine RPM | 2200 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | diesel |
| Fuel injection | direct injection |
| Fuel tank size | 2.5 gal or 9.5 L |
| Oil capacity | - |
| Oil change | - |
| Starter motor | - |
| Starter volts | 12 V |
| Parts And Accessories | Holder Cultitrac A12 Parts |
| Batteries number | - |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | - |
| Charging system | - |
| Charging Volts | - |
| Charging Amps | - |
| Trans system | - |
| Trans type | - |
| Trans gears | 6 forward and 3 reverse |
| Clutch system | dry disc |
| Wheel drive | 4x4 articulated 4WD |
| Final drive | - |
| Steering | - |
| Braking system | drum |
| Cabin type | Open operator station |
| Differentiel lock | - |
| System | open center |
| Valves | - |
| Pump flow | 2.6 gpm or 9.8 lpm |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | 1 gal or 3.8 L |
| Hydraulic pressure | 1850 psi or 127.6 bar |
| Max flow | - |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | - |
| Fuel consumption | - |
| Pulling power | - |
| Claimed power | - |
| Real power | - |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | independent |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | - |
| Hitch system | - |
| Rear hitch | - |
| Rear hitch lift | - |
| Front hitch | - |
| Front hitch lift | - |
Related tractor comparison
Holder Cultitrac A12 International Harvester W-400
Holder Cultitrac A12 Ferguson FF 30
Holder Cultitrac A12 Minneapolis-Moline 335
Holder Cultitrac A12 J.I. Case 310
Holder Cultitrac A12 Massey Ferguson 50
Steiger Bearcat IV KM-225 Farmall Super A-1
Choose another tractor
Useful links and guides ....
- Steiger provided us with the latest version of its Bearcat IV KM-225 service repair manual
- Find All mechanical and electrical parts and accessories of Steiger Bearcat IV KM-225 farm-tractor here
- Get your Holder Cultitrac A12 manual book version
- Cabine, electrical And mechanical parts for Holder Cultitrac A12 farm-tractor here
