Steiger Bearcat III PT-225 VS Ferguson Pony specs comparison
Steiger Bearcat III PT-225
General Infos| Make | Steiger |
| Model | Bearcat III PT-225 |
| Country | United states |
| Production | From 1977 Until 1981 |
| Price | 66,000 USD |
| Tractor type | Four wheel Drive (4WD) tractor |
| Fuel | diesel |
| Service repair manual | Steiger Bearcat III PT-225 Manual |
Dimensions, sizes and tires
| AG front tires | 23.1x30 |
| AG rear tires | 23.1x30 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 28295 lbs or 12834 kg |
| Length | 264.6 inches [672 cm] |
| Width | 120.2 inches [305 cm] |
| Height | - |
| Wheelbase | 132.5 inches [336 cm] |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | - |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 638 ci or 10.5 L |
| Cylinders | 6 cylinders |
| Engine power | 225 hp or 167.8 kW |
| Engine RPM | 2200 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | diesel |
| Fuel injection | - |
| Fuel tank size | 225 gal or 851.6 L |
| Oil capacity | 32 qts or 30.3 L |
| Oil change | - |
| Starter motor | - |
| Starter volts | 12 V |
| Parts And Accessories | Steiger Bearcat III PT-225 Parts |
| Batteries number | 4 |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | 475 |
| Ground force | negative |
| Charging system | alternator |
| Charging Volts | 12 V |
| Charging Amps | 90 amps |
| Trans system | - |
| Trans type | constant mesh |
| Trans gears | 20 forward and 4 reverse |
| Clutch system | hydraulic cerametallic dry disc |
| Wheel drive | 4x4 articulated 4WD |
| Final drive | outboard planetary |
| Steering | hydraulic power |
| Braking system | hydraulic disc |
| Cabin type | Safari Cab standard with air-conditioning |
| Differentiel lock | - |
| System | open center |
| Valves | 4 or 5 |
| Pump flow | 20 gpm or 75.7 lpm |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | 22 gal or 83.3 L |
| Hydraulic pressure | 2250 psi or 155.1 bar |
| Max flow | - |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | - |
| Fuel consumption | - |
| Pulling power | - |
| Claimed power | 57 hp or 42.5 kW |
| Real power | - |
| Engine @RPM | - |
| PTO Clutch | hydrostatic-drive |
| Rear PTO | independent |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | - |
| Hitch system | - |
| Rear hitch | III |
| Rear hitch lift | - |
| Front hitch | - |
| Front hitch lift | - |
Ferguson Pony
General Infos| Make | Ferguson |
| Model | Pony |
| Country | England |
| Production | From 1952 Until 1954 |
| Price | - |
| Tractor type | Utility tractor |
| Fuel | gasoline |
| Service repair manual | Ferguson Pony Manual |
Dimensions, sizes and tires
| AG front tires | 4.00x-15 |
| AG rear tires | 8-24 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 1,450 lbs or 657 kg |
| Length | - |
| Width | - |
| Height | 60 inches [152 cm] |
| Wheelbase | 66 inches [167 cm] |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | 41 to 72 inches |
| Front tread size | 45 inches |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 62 ci or 1.0 L |
| Cylinders | 4 cylinders |
| Engine power | - |
| Engine RPM | 1800 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | gasoline |
| Fuel injection | - |
| Fuel tank size | 6.8 gal or 25.7 L |
| Oil capacity | 4 qts or 3.8 L |
| Oil change | - |
| Starter motor | - |
| Starter volts | - |
| Parts And Accessories | Ferguson Pony Parts |
| Batteries number | - |
| Batteries voltage | - |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | - |
| Charging system | - |
| Charging Volts | - |
| Charging Amps | - |
| Trans system | - |
| Trans type | unsynchronized gear |
| Trans gears | 3 forward and 1 reverse |
| Clutch system | - |
| Wheel drive | 4x2 2WD |
| Final drive | - |
| Steering | manual |
| Braking system | differential mechanical contracting band |
| Cabin type | Open operator station |
| Differentiel lock | - |
| System | optional |
| Valves | - |
| Pump flow | 2.5 gpm or 9.5 lpm |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | 0.4 gal or 1.5 L |
| Hydraulic pressure | - |
| Max flow | - |
| Drawbar type | - |
| Claimed power | 10 hp or 7.5 kW |
| Drawbar horsepower | 10.43 hp or 7.8 kW |
| Fuel consumption | - |
| Pulling power | 1432 lbs or 649 kg |
| Claimed power | - |
| Real power | - |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | optional |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | - |
| Hitch system | - |
| Rear hitch | - |
| Rear hitch lift | - |
| Front hitch | - |
| Front hitch lift | - |
Related tractor comparison
Ferguson Pony Ford 850
Steiger Bearcat III PT-225 Farmall 400
Steiger Bearcat III PT-225 International Harvester DED
Ferguson Pony Minneapolis-Moline UB
Ferguson Pony Allis Chalmers D270
Steiger Bearcat III PT-225 Farmall Super BMD
Choose another tractor
Useful links and guides ....
- Steiger provided us with the latest version of its Bearcat III PT-225 service repair manual
- Find All mechanical and electrical parts and accessories of Steiger Bearcat III PT-225 farm-tractor here
- Get your Ferguson Pony manual book version
- Cabine, electrical And mechanical parts for Ferguson Pony farm-tractor here
