New Holland Workmaster 75 VS J.I. Case 2094 specs comparison

New Holland Workmaster 75
General InfosMake | New Holland |
Model | Workmaster 75 |
Country | United states |
Production | From 2010 Until 2014 |
Price | - |
Tractor type | Utility tractor |
Fuel | diesel |
Service repair manual | New Holland Workmaster 75 Manual |
Dimensions, sizes and tires
AG front tires | 11.2x24 |
AG rear tires | 16.9x30 |
Lawn front tires | - |
Lawn rear tires | - |
Indus front tires | - |
Indus rear tires | - |
Weight | 5,059 lbs or 2294 kg |
Length | 137.2 inches [348 cm] |
Width | 78.4 inches [199 cm] |
Height | 95.3 inches [242 cm] |
Wheelbase | - |
Ground clearance | - |
Turning radius | - |
Rear tread size | 59.7 to 80.2 inches |
Front tread size | 59.6 to 79.6 inches |
Turning radius | - |
Horsepower and engin specs
Engine capacity | 195 ci or 3.2 L |
Cylinders | 4 cylinders |
Engine power | 75 hp or 55.9 kW |
Engine RPM | 2500 (rpm) |
Torque | - | Torque RPM | - |
Fuel type | diesel |
Fuel injection | - |
Fuel tank size | 16 gal or 60.6 L |
Oil capacity | - |
Oil change | - |
Starter motor | electric |
Starter volts | 12 V |
Parts And Accessories | New Holland Workmaster 75 Parts |
Batteries number | - |
Batteries voltage | 12 V |
Battries Amps | - |
Cold Amps | 800 |
Ground force | negative |
Charging system | alternator |
Charging Volts | 12 V |
Charging Amps | 65 amps |
Trans system | - |
Trans type | partially synchronized |
Trans gears | 8 forward and 2 reverse |
Clutch system | 11-inch dry organic plate |
Wheel drive | 4x4 MFWD 4WD |
Final drive | - |
Steering | hydrostatic power |
Braking system | differential mechanical wet disc |
Cabin type | Two-post foldable ROPS |
Differentiel lock | mechanical rear lock engaged by foot pedal |
System | open center fixed displacement |
Valves | 1 or 2 |
Pump flow | 10.4 gpm or 39.4 lpm |
SVC flow | - |
Steering flow | 8.3 gpm or 31.4 lpm |
Tank capacity | - |
Hydraulic pressure | - |
Max flow | 18.7 gpm or 70.8 lpm |
Drawbar type | - |
Claimed power | - |
Drawbar horsepower | - |
Fuel consumption | - |
Pulling power | - |
Claimed power | 65 hp or 48.5 kW |
Real power | 66.69 hp or 49.7 kW |
Engine @RPM | - |
PTO Clutch | - |
Rear PTO | independent |
Rear PTO RPM | 540 (rpm) |
Front PTO | - |
Front PTO RPM | - |
Mid PTO | - |
Mid PTO RPM | - |
Fuel consumption | 4.0 gal/hour or 15.1 l/hour |
Hitch system | position control and mechanical draft sensing |
Rear hitch | 2/1 |
Rear hitch lift | 3,276 lbs or 1485 kg |
Front hitch | - |
Front hitch lift | - |

J.I. Case 2094
General InfosMake | J.I. Case |
Model | 2094 |
Country | Unites states |
Production | From 1984 Until 1984 |
Price | - |
Tractor type | Row Crop tractor |
Fuel | diesel |
Service repair manual | J.I. Case 2094 Manual |
Dimensions, sizes and tires
AG front tires | 14Lx16 |
AG rear tires | 23.1x34 |
Lawn front tires | - |
Lawn rear tires | - |
Indus front tires | - |
Indus rear tires | - |
Weight | 10,950 lbs or 4966 kg |
Length | - |
Width | 96 inches [243 cm] |
Height | - |
Wheelbase | 104 inches [264 cm] |
Ground clearance | - |
Turning radius | - |
Rear tread size | - |
Front tread size | - |
Turning radius | - |
Horsepower and engin specs
Engine capacity | 504 ci or 8.3 L |
Cylinders | 6 cylinders |
Engine power | 127 hp or 94.7 kW |
Engine RPM | 2100 (rpm) |
Torque | 366.6 lb-ft or 497.1 Nm | Torque RPM | 1575 (rpm) |
Fuel type | diesel |
Fuel injection | - |
Fuel tank size | 65 gal or 246.0 L |
Oil capacity | 19 qts or 18.0 L |
Oil change | - |
Starter motor | - |
Starter volts | 12 V |
Parts And Accessories | J.I. Case 2094 Parts |
Batteries number | - |
Batteries voltage | 12 V |
Battries Amps | - |
Cold Amps | - |
Ground force | negative |
Charging system | alternator |
Charging Volts | - |
Charging Amps | 72 amps |
Trans system | - |
Trans type | three-speed power shift |
Trans gears | 12 forward and 3 reverse |
Clutch system | - |
Wheel drive | 4x2 2WD |
Final drive | - |
Steering | power |
Braking system | wet disc |
Cabin type | Four-post ROPS |
Differentiel lock | - |
System | closed center |
Valves | 2 to 4 |
Pump flow | 23 gpm or 87.1 lpm |
SVC flow | - |
Steering flow | 8 gpm or 30.3 lpm |
Tank capacity | 25 gal or 94.6 L |
Hydraulic pressure | 2250 psi or 155.1 bar |
Max flow | - |
Drawbar type | - |
Claimed power | 100 hp or 74.6 kW |
Drawbar horsepower | 98.66 hp or 73.6 kW |
Fuel consumption | 7.1 gal/hour or 26.9 l/hour |
Pulling power | 11,910 lbs or 5402 kg |
Claimed power | 110 hp or 82.0 kW |
Real power | 111.50 hp or 83.1 kW |
Engine @RPM | - |
PTO Clutch | hydraulic |
Rear PTO | independent |
Rear PTO RPM | 540 (rpm) |
Front PTO | - |
Front PTO RPM | - |
Mid PTO | - |
Mid PTO RPM | - |
Fuel consumption | 7.2 gal/hour or 27.3 l/hour |
Hitch system | - |
Rear hitch | II |
Rear hitch lift | 6,600 lbs or 2993 kg |
Front hitch | - |
Front hitch lift | - |
Related tractor comparison


J.I. Case 2094 Yanmar YM2820


J.I. Case 2094 Steyr 8130


J.I. Case 2094 Massey Ferguson 3505


New Holland Workmaster 75 Hesston 466


J.I. Case 2094 International Harvester 986B


J.I. Case 2094 Fiat 45-66
Choose another tractor
Useful links and guides ....
- New Holland provided us with the latest version of its Workmaster 75 service repair manual
- Find All mechanical and electrical parts and accessories of New Holland Workmaster 75 farm-tractor here
- Get your J.I. Case 2094 manual book version
- Cabine, electrical And mechanical parts for J.I. Case 2094 farm-tractor here