New Holland Workmaster 50 VS Deutz-Fahr DX 7.10 specs comparison
New Holland Workmaster 50
General Infos| Make | New Holland |
| Model | Workmaster 50 |
| Country | United states |
| Production | From 2015 |
| Price | - |
| Tractor type | Utility tractor |
| Fuel | diesel |
| Service repair manual | New Holland Workmaster 50 Manual |
Dimensions, sizes and tires
| AG front tires | 7.5x16 |
| AG rear tires | 13.6x28 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | 12.5x18 |
| Indus rear tires | 18.4x24 |
| Weight | 4442 lbs or 2014 kg |
| Length | 134 inches [340 cm] |
| Width | 77.5 inches [196 cm] |
| Height | 97.6 inches [247 cm] |
| Wheelbase | 97.6 inches [247 cm] |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | - |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 136 ci or 2.2 L |
| Cylinders | 3 cylinders |
| Engine power | 53 hp or 39.5 kW |
| Engine RPM | 2600 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | diesel |
| Fuel injection | electronic high-pressure common rail direct injection |
| Fuel tank size | 13.8 gal or 52.2 L |
| Oil capacity | - |
| Oil change | - |
| Starter motor | electric |
| Starter volts | 12 V |
| Parts And Accessories | New Holland Workmaster 50 Parts |
| Batteries number | 1 |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | negative |
| Charging system | alternator |
| Charging Volts | - |
| Charging Amps | 75 amps |
| Trans system | - |
| Trans type | synchronized shuttle |
| Trans gears | 8 forward and reverse |
| Clutch system | - |
| Wheel drive | 4x2 2WD |
| Final drive | - |
| Steering | power |
| Braking system | wet disc |
| Cabin type | Two-post folding ROPS |
| Differentiel lock | - |
| System | open center |
| Valves | 1 or 2 |
| Pump flow | 12 gpm or 45.4 lpm |
| SVC flow | - |
| Steering flow | 5.5 gpm or 20.8 lpm |
| Tank capacity | - |
| Hydraulic pressure | - |
| Max flow | 17.5 gpm or 66.2 lpm |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | - |
| Fuel consumption | - |
| Pulling power | - |
| Claimed power | 45 hp or 33.6 kW |
| Real power | - |
| Engine @RPM | - |
| PTO Clutch | mechanical |
| Rear PTO | independent |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | - |
| Hitch system | position and draft control |
| Rear hitch | II/I |
| Rear hitch lift | 3307 lbs or 1500 kg |
| Front hitch | - |
| Front hitch lift | - |
Deutz-Fahr DX 7.10
General Infos| Make | Deutz-Fahr |
| Model | DX 7.10 |
| Country | Germany |
| Production | From 1984 Until 1989 |
| Price | - |
| Tractor type | Row Crop tractor |
| Fuel | diesel |
| Service repair manual | Deutz-Fahr DX 7.10 Manual |
Dimensions, sizes and tires
| AG front tires | 11.00x16 |
| AG rear tires | 20.8x38 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 11905 lbs or 5400 kg |
| Length | 187.8 inches [477 cm] |
| Width | 93 inches [236 cm] |
| Height | 109.8 inches [278 cm] |
| Wheelbase | 111.3 inches [282 cm] |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | 64 to 88 inches |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 373.9 ci or 6.1 L |
| Cylinders | 6 cylinders |
| Engine power | 160 hp or 119.3 kW |
| Engine RPM | 2400 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | diesel |
| Fuel injection | - |
| Fuel tank size | 66 gal or 249.8 L |
| Oil capacity | 17 qts or 16.1 L |
| Oil change | - |
| Starter motor | electric |
| Starter volts | 12 V |
| Parts And Accessories | Deutz-Fahr DX 7.10 Parts |
| Batteries number | - |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | negative |
| Charging system | alternator |
| Charging Volts | - |
| Charging Amps | - |
| Trans system | Powermatic |
| Trans type | two-speed power shift |
| Trans gears | 32 forward and 8 reverse |
| Clutch system | cerametallic disc |
| Wheel drive | 4x2 2WD |
| Final drive | - |
| Steering | power |
| Braking system | hydraulic dry disc |
| Cabin type | Mastercab standard with air-conditioning |
| Differentiel lock | mechanical rear |
| System | open center |
| Valves | 1 to 3 |
| Pump flow | 27.3 gpm or 103.3 lpm |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | - |
| Hydraulic pressure | 2538 psi or 175.0 bar |
| Max flow | - |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | - |
| Fuel consumption | - |
| Pulling power | - |
| Claimed power | 145 hp or 108.1 kW |
| Real power | - |
| Engine @RPM | 540@1920 (rpm) |
| PTO Clutch | - |
| Rear PTO | independent |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | independent |
| Front PTO RPM | 1000 (rpm) |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | - |
| Hitch system | - |
| Rear hitch | III |
| Rear hitch lift | 18739 lbs or 8500 kg |
| Front hitch | - |
| Front hitch lift | - |
Related tractor comparison
Deutz-Fahr DX 7.10 Yanmar YM180
New Holland Workmaster 50 Iseki TU200
New Holland Workmaster 50 CaseIH 785
New Holland Workmaster 50 Steiger Cougar IV CM-280
New Holland Workmaster 50 CaseIH 585
Deutz-Fahr DX 7.10 International Harvester 485
Choose another tractor
Useful links and guides ....
- New Holland provided us with the latest version of its Workmaster 50 service repair manual
- Find All mechanical and electrical parts and accessories of New Holland Workmaster 50 farm-tractor here
- Get your Deutz-Fahr DX 7.10 manual book version
- Cabine, electrical And mechanical parts for Deutz-Fahr DX 7.10 farm-tractor here
