New Holland Workmaster 40 VS Deutz-Fahr DX 7.10 specs comparison
New Holland Workmaster 40
General Infos| Make | New Holland |
| Model | Workmaster 40 |
| Country | United states |
| Production | From 2013 Until 2015 |
| Price | - |
| Tractor type | Compact Utility tractor |
| Fuel | diesel |
| Service repair manual | New Holland Workmaster 40 Manual |
Dimensions, sizes and tires
| AG front tires | - |
| AG rear tires | - |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 2900 lbs or 1315 kg |
| Length | 117.7 inches [298 cm] |
| Width | 66.5 inches [168 cm] |
| Height | 87.7 inches [222 cm] |
| Wheelbase | - |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | 50.5 inches |
| Front tread size | 45.6 inches |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 122 ci or 2.0 L |
| Cylinders | 3 cylinders |
| Engine power | 38 hp or 28.3 kW |
| Engine RPM | 2600 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | diesel |
| Fuel injection | - |
| Fuel tank size | 7.4 gal or 28.0 L |
| Oil capacity | - |
| Oil change | - |
| Starter motor | electric |
| Starter volts | 12 V |
| Parts And Accessories | New Holland Workmaster 40 Parts |
| Batteries number | 1 |
| Batteries voltage | 12 V |
| Battries Amps | 80 amps |
| Cold Amps | 660 |
| Ground force | negative |
| Charging system | alternator |
| Charging Volts | - |
| Charging Amps | 50 amps |
| Trans system | - |
| Trans type | hydrostatic |
| Trans gears | infinite (3-range) forward and reverse |
| Clutch system | - |
| Wheel drive | 4x4 MFWD 4WD |
| Final drive | - |
| Steering | hydrostatic power |
| Braking system | wet disc |
| Cabin type | Two-post foldable ROPS |
| Differentiel lock | mechanical rear |
| System | open center gear pump |
| Valves | - |
| Pump flow | 8.2 gpm or 31.0 lpm |
| SVC flow | - |
| Steering flow | 4.8 gpm or 18.2 lpm |
| Tank capacity | - |
| Hydraulic pressure | - |
| Max flow | 13 gpm or 49.2 lpm |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | - |
| Fuel consumption | - |
| Pulling power | - |
| Claimed power | 31.2 hp or 23.3 kW |
| Real power | - |
| Engine @RPM | - |
| PTO Clutch | electro-hydraulic |
| Rear PTO | independent |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | independent |
| Mid PTO RPM | 2000 (rpm) |
| Fuel consumption | - |
| Hitch system | - |
| Rear hitch | I |
| Rear hitch lift | 1807 lbs or 819 kg |
| Front hitch | - |
| Front hitch lift | - |
Deutz-Fahr DX 7.10
General Infos| Make | Deutz-Fahr |
| Model | DX 7.10 |
| Country | Germany |
| Production | From 1984 Until 1989 |
| Price | - |
| Tractor type | Row Crop tractor |
| Fuel | diesel |
| Service repair manual | Deutz-Fahr DX 7.10 Manual |
Dimensions, sizes and tires
| AG front tires | 11.00x16 |
| AG rear tires | 20.8x38 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 11905 lbs or 5400 kg |
| Length | 187.8 inches [477 cm] |
| Width | 93 inches [236 cm] |
| Height | 109.8 inches [278 cm] |
| Wheelbase | 111.3 inches [282 cm] |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | 64 to 88 inches |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 373.9 ci or 6.1 L |
| Cylinders | 6 cylinders |
| Engine power | 160 hp or 119.3 kW |
| Engine RPM | 2400 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | diesel |
| Fuel injection | - |
| Fuel tank size | 66 gal or 249.8 L |
| Oil capacity | 17 qts or 16.1 L |
| Oil change | - |
| Starter motor | electric |
| Starter volts | 12 V |
| Parts And Accessories | Deutz-Fahr DX 7.10 Parts |
| Batteries number | - |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | negative |
| Charging system | alternator |
| Charging Volts | - |
| Charging Amps | - |
| Trans system | Powermatic |
| Trans type | two-speed power shift |
| Trans gears | 32 forward and 8 reverse |
| Clutch system | cerametallic disc |
| Wheel drive | 4x2 2WD |
| Final drive | - |
| Steering | power |
| Braking system | hydraulic dry disc |
| Cabin type | Mastercab standard with air-conditioning |
| Differentiel lock | mechanical rear |
| System | open center |
| Valves | 1 to 3 |
| Pump flow | 27.3 gpm or 103.3 lpm |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | - |
| Hydraulic pressure | 2538 psi or 175.0 bar |
| Max flow | - |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | - |
| Fuel consumption | - |
| Pulling power | - |
| Claimed power | 145 hp or 108.1 kW |
| Real power | - |
| Engine @RPM | 540@1920 (rpm) |
| PTO Clutch | - |
| Rear PTO | independent |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | independent |
| Front PTO RPM | 1000 (rpm) |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | - |
| Hitch system | - |
| Rear hitch | III |
| Rear hitch lift | 18739 lbs or 8500 kg |
| Front hitch | - |
| Front hitch lift | - |
Related tractor comparison
Deutz-Fahr DX 7.10 Yanmar YM1720
Deutz-Fahr DX 7.10 Schluter Compact 1150 TV 6
Deutz-Fahr DX 7.10 Deutz-Allis 6275
Deutz-Fahr DX 7.10 Lamborghini 1706
New Holland Workmaster 40 Yanmar YM1301
New Holland Workmaster 40 Kubota L2550
Choose another tractor
Useful links and guides ....
- New Holland provided us with the latest version of its Workmaster 40 service repair manual
- Find All mechanical and electrical parts and accessories of New Holland Workmaster 40 farm-tractor here
- Get your Deutz-Fahr DX 7.10 manual book version
- Cabine, electrical And mechanical parts for Deutz-Fahr DX 7.10 farm-tractor here
