New Holland TN75A VS Denning E 10-18 specs comparison
New Holland TN75A
General Infos| Make | New Holland |
| Model | TN75A |
| Country | United states |
| Production | From 2004 Until 2008 |
| Price | - |
| Tractor type | Utility tractor |
| Fuel | diesel |
| Service repair manual | New Holland TN75A Manual |
Dimensions, sizes and tires
| AG front tires | - |
| AG rear tires | - |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 5,020 lbs or 2277 kg |
| Length | 153.3 inches [389 cm] (2WD) |
| Width | 67.2 inches [170 cm] |
| Height | 95.1 inches [241 cm] |
| Wheelbase | 81.5 inches [207 cm] (2WD) |
| Ground clearance | - |
| Turning radius | 12.5 feet [3.8 m] |
| Rear tread size | - |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 179 ci or 2.9 L |
| Cylinders | 3 cylinders |
| Engine power | 72 hp or 53.7 kW |
| Engine RPM | 2300 (rpm) |
| Torque | 220 lb-ft or 298.3 Nm | Torque RPM | 1400 (rpm) |
| Fuel type | diesel |
| Fuel injection | - |
| Fuel tank size | 23 gal or 87.1 L |
| Oil capacity | - |
| Oil change | - |
| Starter motor | electric |
| Starter volts | 12 V |
| Parts And Accessories | New Holland TN75A Parts |
| Batteries number | 1 |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | 730 |
| Ground force | negative |
| Charging system | alternator |
| Charging Volts | - |
| Charging Amps | 65 amps |
| Trans system | Synchro Command Plus |
| Trans type | partially synchronized with power shuttle |
| Trans gears | 16 forward and reverse |
| Clutch system | six 113mm wet organic discs |
| Wheel drive | 4x2 2WD |
| Final drive | - |
| Steering | hydrostatic power |
| Braking system | differential wet disc |
| Cabin type | ROPS |
| Differentiel lock | - |
| System | open center |
| Valves | 1 to 4 |
| Pump flow | 16.9 gpm or 64.0 lpm |
| SVC flow | - |
| Steering flow | 7.4 gpm or 28.0 lpm |
| Tank capacity | - |
| Hydraulic pressure | 2755 psi or 190.0 bar |
| Max flow | - |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | 54.7 hp or 40.8 kW |
| Fuel consumption | 3.8 gal/hour or 14.4 l/hour |
| Pulling power | 6,135 lbs or 2782 kg |
| Claimed power | 62 hp or 46.2 kW |
| Real power | 63.6 hp or 47.4 kW |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | independent |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | 3.9 gal/hour or 14.8 l/hour |
| Hitch system | - |
| Rear hitch | II/I |
| Rear hitch lift | 3,960 lbs or 1796 kg |
| Front hitch | - |
| Front hitch lift | - |
Denning E 10-18
General Infos| Make | Denning |
| Model | E 10-18 |
| Country | United states |
| Production | From 1916 Until 1918 |
| Price | - |
| Tractor type | Standard tread tractor |
| Fuel | gasoline |
| Service repair manual | Denning E 10-18 Manual |
Dimensions, sizes and tires
| AG front tires | - |
| AG rear tires | 46x10 steel |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 3600 lbs or 1632 kg |
| Length | 120 inches [304 cm] |
| Width | 56 inches [142 cm] |
| Height | 61 inches [154 cm] |
| Wheelbase | - |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | - |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 202 ci or 3.3 L |
| Cylinders | 4 cylinders |
| Engine power | - |
| Engine RPM | 1200 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | gasoline |
| Fuel injection | - |
| Fuel tank size | 15 gal or 56.8 L |
| Oil capacity | - |
| Oil change | - |
| Starter motor | - |
| Starter volts | - |
| Parts And Accessories | Denning E 10-18 Parts |
| Batteries number | - |
| Batteries voltage | - |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | - |
| Charging system | - |
| Charging Volts | - |
| Charging Amps | - |
| Trans system | - |
| Trans type | friction disc |
| Trans gears | 6 forward and reverse |
| Clutch system | - |
| Wheel drive | 4x2 2WD |
| Final drive | - |
| Steering | manual |
| Braking system | - |
| Cabin type | Open operator station |
| Differentiel lock | - |
| System | - |
| Valves | - |
| Pump flow | - |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | - |
| Hydraulic pressure | - |
| Max flow | - |
| Drawbar type | - |
| Claimed power | 10 hp or 7.5 kW |
| Drawbar horsepower | - |
| Fuel consumption | - |
| Pulling power | - |
| Claimed power | - |
| Real power | - |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | - |
| Rear PTO RPM | - |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | - |
| Hitch system | - |
| Rear hitch | - |
| Rear hitch lift | - |
| Front hitch | - |
| Front hitch lift | - |
Related tractor comparison
New Holland TN75A Bolinder-Munktell 30-40
Denning E 10-18 Huber 15-30 Farmer
Denning E 10-18 Samson S25 Sieve-Grip
New Holland TN75A Waterloo Boy R
New Holland TN75A Leader 12-18
Denning E 10-18 Waterloo Boy C
Choose another tractor
Useful links and guides ....
- New Holland provided us with the latest version of its TN75A service repair manual
- Find All mechanical and electrical parts and accessories of New Holland TN75A farm-tractor here
- Get your Denning E 10-18 manual book version
- Cabine, electrical And mechanical parts for Denning E 10-18 farm-tractor here
