Minneapolis-Moline Jet Star 3 VS International Harvester 260A specs comparison
Minneapolis-Moline Jet Star 3
General Infos| Make | Minneapolis-Moline |
| Model | Jet Star 3 |
| Country | England |
| Production | From 1964 Until 1967 |
| Price | - |
| Tractor type | Industrial tractor |
| Fuel | gasoline |
| Service repair manual | Minneapolis-Moline Jet Star 3 Manual |
Dimensions, sizes and tires
| AG front tires | 5.50-16 |
| AG rear tires | 12.4-28 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | - |
| Length | - |
| Width | - |
| Height | - |
| Wheelbase | - |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | 56 to 84 inches |
| Front tread size | 50 to 78 inches |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 206 ci or 3.4 L |
| Cylinders | 4 cylinders |
| Engine power | - |
| Engine RPM | 1750 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | gasoline |
| Fuel injection | - |
| Fuel tank size | - |
| Oil capacity | - |
| Oil change | - |
| Starter motor | - |
| Starter volts | 12 V |
| Parts And Accessories | Minneapolis-Moline Jet Star 3 Parts |
| Batteries number | 1 |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | - |
| Charging system | - |
| Charging Volts | - |
| Charging Amps | - |
| Trans system | shuttle |
| Trans type | partial power shift |
| Trans gears | 5 forward and reverse |
| Clutch system | - |
| Wheel drive | 4x2 2WD |
| Final drive | - |
| Steering | manual |
| Braking system | disc |
| Cabin type | Open operator station |
| Differentiel lock | - |
| System | - |
| Valves | - |
| Pump flow | - |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | - |
| Hydraulic pressure | - |
| Max flow | - |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | - |
| Fuel consumption | - |
| Pulling power | - |
| Claimed power | 44 hp or 32.8 kW |
| Real power | - |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | independent |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | - |
| Hitch system | - |
| Rear hitch | II |
| Rear hitch lift | - |
| Front hitch | - |
| Front hitch lift | - |
International Harvester 260A
General Infos| Make | International Harvester |
| Model | 260A |
| Country | United states |
| Production | From 1978 Until 1982 |
| Price | - |
| Tractor type | Industrial tractor |
| Fuel | diesel |
| Service repair manual | International Harvester 260A Manual |
Dimensions, sizes and tires
| AG front tires | 11L-16 |
| AG rear tires | 16.9-24 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | 7.50-16 |
| Indus rear tires | 14.9-24 |
| Weight | 7972 lbs or 3616 kg |
| Length | 186 inches [472 cm] (loader tractor) |
| Width | 81 inches [205 cm] |
| Height | 107 inches [271 cm] |
| Wheelbase | 80.5 inches [204 cm] |
| Ground clearance | - |
| Turning radius | 17.6 feet [5.4 m] |
| Rear tread size | - |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 239 ci or 3.9 L |
| Cylinders | 4 cylinders |
| Engine power | 74 hp or 55.2 kW |
| Engine RPM | 2400 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | diesel |
| Fuel injection | - |
| Fuel tank size | 20 gal or 75.7 L |
| Oil capacity | 10 qts or 9.5 L |
| Oil change | - |
| Starter motor | - |
| Starter volts | 12 V |
| Parts And Accessories | International Harvester 260A Parts |
| Batteries number | - |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | negative |
| Charging system | alternator |
| Charging Volts | - |
| Charging Amps | 55 amps |
| Trans system | - |
| Trans type | hydrostatic |
| Trans gears | infinite (2-range) forward and reverse |
| Clutch system | - |
| Wheel drive | 4x2 2WD |
| Final drive | - |
| Steering | power |
| Braking system | independent hydraulic wet disc |
| Cabin type | Four-rops ROPS canopy |
| Differentiel lock | - |
| System | open center |
| Valves | - |
| Pump flow | 28 gpm or 106.0 lpm |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | 18.5 gal or 70.0 L |
| Hydraulic pressure | 2250 psi or 155.1 bar |
| Max flow | - |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | - |
| Fuel consumption | - |
| Pulling power | - |
| Claimed power | - |
| Real power | - |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | independent |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | - |
| Hitch system | - |
| Rear hitch | II/I |
| Rear hitch lift | - |
| Front hitch | - |
| Front hitch lift | - |
Related tractor comparison
Minneapolis-Moline Jet Star 3 Ford 531
International Harvester 260A John Deere 750
International Harvester 260A Ford 545
International Harvester 260A Ford 535
Minneapolis-Moline Jet Star 3 Chamberlain Champion Mark IV
International Harvester 260A International Harvester 165
Choose another tractor
Useful links and guides ....
- Minneapolis-Moline provided us with the latest version of its Jet Star 3 service repair manual
- Find All mechanical and electrical parts and accessories of Minneapolis-Moline Jet Star 3 industrial-tractor here
- Get your International Harvester 260A manual book version
- Cabine, electrical And mechanical parts for International Harvester 260A industrial-tractor here
