Minneapolis-Moline G1350 VS Deutz-Fahr DX 3.30 specs comparison
Minneapolis-Moline G1350
General Infos| Make | Minneapolis-Moline |
| Model | G1350 |
| Country | England |
| Production | From 1969 Until 1971 |
| Price | - |
| Tractor type | Row Crop tractor |
| Fuel | diesel |
| Service repair manual | Minneapolis-Moline G1350 Manual |
Dimensions, sizes and tires
| AG front tires | 7.50x16 |
| AG rear tires | 20.8x38 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 12050 lbs or 5465 kg |
| Length | 168.5 inches [427 cm] |
| Width | 95 inches [241 cm] |
| Height | - |
| Wheelbase | 104.25 inches [264 cm] |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | 61 to 84 inches |
| Front tread size | 54 inches |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 504 ci or 8.3 L |
| Cylinders | 6 cylinders |
| Engine power | - |
| Engine RPM | 1800 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | diesel |
| Fuel injection | - |
| Fuel tank size | 40 gal or 151.4 L |
| Oil capacity | - |
| Oil change | - |
| Starter motor | - |
| Starter volts | 12 V |
| Parts And Accessories | Minneapolis-Moline G1350 Parts |
| Batteries number | 2 |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | negative |
| Charging system | alternator |
| Charging Volts | - |
| Charging Amps | - |
| Trans system | Minneapolis-Moline Ampli-Torc |
| Trans type | two-speed power shift |
| Trans gears | 10 forward and 2 reverse |
| Clutch system | 355.6mm dry disc |
| Wheel drive | 4x2 2WD |
| Final drive | outboard planetary |
| Steering | power |
| Braking system | dry disc |
| Cabin type | Open operator station |
| Differentiel lock | - |
| System | open center |
| Valves | 2 or 3 |
| Pump flow | 20 gpm or 75.7 lpm |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | - |
| Hydraulic pressure | 2000 psi or 137.9 bar |
| Max flow | - |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | 116.41 hp or 86.8 kW |
| Fuel consumption | 9.4 gal/hour or 35.6 l/hour |
| Pulling power | 15620 lbs or 7085 kg |
| Claimed power | 135 hp or 100.7 kW |
| Real power | 128.10 hp or 95.5 kW |
| Engine @RPM | 540@1800 (rpm) |
| PTO Clutch | wet disc |
| Rear PTO | independent |
| Rear PTO RPM | 1000 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | 8.4 gal/hour or 31.8 l/hour |
| Hitch system | - |
| Rear hitch | III/II |
| Rear hitch lift | - |
| Front hitch | - |
| Front hitch lift | - |
Deutz-Fahr DX 3.30
General Infos| Make | Deutz-Fahr |
| Model | DX 3.30 |
| Country | Germany |
| Production | From 1984 Until 1995 |
| Price | - |
| Tractor type | Utility tractor |
| Fuel | diesel |
| Service repair manual | Deutz-Fahr DX 3.30 Manual |
Dimensions, sizes and tires
| AG front tires | 7.50x16 |
| AG rear tires | 16.9x30 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 6018 lbs or 2729 kg |
| Length | 140.2 inches [356 cm] |
| Width | 82.3 inches [209 cm] |
| Height | 91.3 inches [231 cm] |
| Wheelbase | 82 inches [208 cm] |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | 59 to 78.8 inches |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 172.50 ci or 2.8 L |
| Cylinders | 3 cylinders |
| Engine power | 54 hp or 40.3 kW |
| Engine RPM | 2500 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | diesel |
| Fuel injection | - |
| Fuel tank size | 19.8 gal or 74.9 L |
| Oil capacity | 8.5 qts or 8.0 L |
| Oil change | - |
| Starter motor | - |
| Starter volts | - |
| Parts And Accessories | Deutz-Fahr DX 3.30 Parts |
| Batteries number | - |
| Batteries voltage | - |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | - |
| Charging system | - |
| Charging Volts | - |
| Charging Amps | - |
| Trans system | Dual-Split |
| Trans type | two-speed power shift |
| Trans gears | 24 forward and 8 reverse |
| Clutch system | dry disc |
| Wheel drive | 4x2 2WD |
| Final drive | - |
| Steering | power |
| Braking system | mechanical disc |
| Cabin type | Four-post ROPS with canopy |
| Differentiel lock | mechanical rear |
| System | open center |
| Valves | 1 to 3 |
| Pump flow | 13.5 gpm or 51.1 lpm |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | 4 gal or 15.1 L |
| Hydraulic pressure | 2538 psi or 175.0 bar |
| Max flow | - |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | - |
| Fuel consumption | - |
| Pulling power | - |
| Claimed power | - |
| Real power | - |
| Engine @RPM | - |
| PTO Clutch | dry disc |
| Rear PTO | independent |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | independent |
| Front PTO RPM | 1000 (rpm) |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | - |
| Hitch system | position and draft control |
| Rear hitch | I |
| Rear hitch lift | 5291 lbs or 2399 kg |
| Front hitch | II |
| Front hitch lift | - |
Related tractor comparison
Deutz-Fahr DX 3.30 Yanmar YM1702
Minneapolis-Moline G1350 Iseki TA250
Deutz-Fahr DX 3.30 Schluter Compact 1350 TV 6
Minneapolis-Moline G1350 Massey Ferguson 283
Minneapolis-Moline G1350 John Deere 4650
Deutz-Fahr DX 3.30 International Harvester 785
Choose another tractor
Useful links and guides ....
- Minneapolis-Moline provided us with the latest version of its G1350 service repair manual
- Find All mechanical and electrical parts and accessories of Minneapolis-Moline G1350 farm-tractor here
- Get your Deutz-Fahr DX 3.30 manual book version
- Cabine, electrical And mechanical parts for Deutz-Fahr DX 3.30 farm-tractor here
