Marshall Field Marshall Series III VS AGCO DT250B specs comparison
Marshall Field Marshall Series III
General Infos| Make | Marshall |
| Model | Field Marshall Series III |
| Country | United states |
| Production | From 1949 Until 1952 |
| Price | - |
| Tractor type | Standard tread tractor |
| Fuel | diesel |
| Service repair manual | Marshall Field Marshall Series III Manual |
Dimensions, sizes and tires
| AG front tires | - |
| AG rear tires | - |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | - |
| Length | - |
| Width | - |
| Height | - |
| Wheelbase | - |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | - |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 310.4 ci or 5.1 L |
| Cylinders | 1 cylinders |
| Engine power | - |
| Engine RPM | 750 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | diesel |
| Fuel injection | - |
| Fuel tank size | - |
| Oil capacity | - |
| Oil change | - |
| Starter motor | - |
| Starter volts | - |
| Parts And Accessories | Marshall Field Marshall Series III Parts |
| Batteries number | - |
| Batteries voltage | - |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | - |
| Charging system | - |
| Charging Volts | - |
| Charging Amps | - |
| Trans system | - |
| Trans type | gear |
| Trans gears | 3 forward and 1 reverse |
| Clutch system | - |
| Wheel drive | 4x2 2WD |
| Final drive | - |
| Steering | manual |
| Braking system | - |
| Cabin type | Open operator station |
| Differentiel lock | - |
| System | - |
| Valves | - |
| Pump flow | - |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | - |
| Hydraulic pressure | - |
| Max flow | - |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | - |
| Fuel consumption | - |
| Pulling power | - |
| Claimed power | - |
| Real power | - |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | - |
| Rear PTO RPM | - |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | - |
| Hitch system | - |
| Rear hitch | - |
| Rear hitch lift | - |
| Front hitch | - |
| Front hitch lift | - |
AGCO DT250B
General Infos| Make | AGCO |
| Model | DT250B |
| Country | United states |
| Production | From 2009 Until 2010 |
| Price | - |
| Tractor type | Row Crop tractor |
| Fuel | diesel |
| Service repair manual | AGCO DT250B Manual |
Dimensions, sizes and tires
| AG front tires | 480/70R34 |
| AG rear tires | 520/85R46 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 24,250 lbs or 10999 kg |
| Length | 215.7 inches [547 cm] |
| Width | - |
| Height | 141 inches [358 cm] |
| Wheelbase | 122.2 inches [310 cm] |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | - |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 512.6 ci or 8.4 L |
| Cylinders | 6 cylinders |
| Engine power | 290 hp or 216.3 kW |
| Engine RPM | 2200 (rpm) |
| Torque | 1033 lb-ft or 1400.7 Nm | Torque RPM | 1500 (rpm) |
| Fuel type | diesel |
| Fuel injection | high-pressure common rail |
| Fuel tank size | 155.9 gal or 590.1 L |
| Oil capacity | - |
| Oil change | - |
| Starter motor | electric |
| Starter volts | 12 V |
| Parts And Accessories | AGCO DT250B Parts |
| Batteries number | - |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | negative |
| Charging system | alternator |
| Charging Volts | - |
| Charging Amps | 240 amps |
| Trans system | PowerMaxx CVT |
| Trans type | continuously variable transmission |
| Trans gears | infinite forward and reverse |
| Clutch system | - |
| Wheel drive | 4x4 MFWD 4WD |
| Final drive | inboard planetary |
| Steering | hydrostatic power |
| Braking system | hydraulic wet disc |
| Cabin type | Cab standard with heat and air-conditioning |
| Differentiel lock | full locking electro-hydraulic front and rear |
| System | closed center load sensing |
| Valves | 4 to 6 |
| Pump flow | - |
| SVC flow | 26.4 gpm or 99.9 lpm |
| Steering flow | - |
| Tank capacity | - |
| Hydraulic pressure | 2,901 psi or 200.0 bar |
| Max flow | 46.2 gpm or 174.9 lpm |
| Drawbar type | Category 3 standard |
| Claimed power | - |
| Drawbar horsepower | 213.6 hp or 159.3 kW |
| Fuel consumption | 15.7 gal/hour or 59.4 l/hour |
| Pulling power | 30,335 lbs or 13759 kg |
| Claimed power | 250 hp or 186.4 kW |
| Real power | 275.8 hp or 205.7 kW |
| Engine @RPM | 1000@1970 (rpm) |
| PTO Clutch | electro-hydraulic |
| Rear PTO | independent |
| Rear PTO RPM | 1000E (rpm) |
| Front PTO | optional |
| Front PTO RPM | 1000 (rpm) |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | 15.9 gal/hour or 60.2 l/hour |
| Hitch system | - |
| Rear hitch | 3 |
| Rear hitch lift | 26,460 lbs or 12002 kg |
| Front hitch | 3 |
| Front hitch lift | 11,020 lbs or 4998 kg |
Related tractor comparison
AGCO DT250B New Holland T7.170
AGCO DT250B McCormick Intl F100
Marshall Field Marshall Series III Claas Arion 520
Marshall Field Marshall Series III Montana U5784C
Marshall Field Marshall Series III CaseIH Magnum 335
AGCO DT250B John Deere 6110B
Choose another tractor
Useful links and guides ....
- Marshall provided us with the latest version of its Field Marshall Series III service repair manual
- Find All mechanical and electrical parts and accessories of Marshall Field Marshall Series III farm-tractor here
- Get your AGCO DT250B manual book version
- Cabine, electrical And mechanical parts for AGCO DT250B farm-tractor here
