Marshall 802 VS New Holland Workmaster 75 specs comparison
Marshall 802
General Infos| Make | Marshall |
| Model | 802 |
| Country | United states |
| Production | From 1982 Until 1984 |
| Price | 20,500 USD |
| Tractor type | Utility tractor |
| Fuel | diesel |
| Service repair manual | Marshall 802 Manual |
Dimensions, sizes and tires
| AG front tires | 7.50x16 |
| AG rear tires | 14.00x34 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 6550 lbs or 2971 kg |
| Length | - |
| Width | - |
| Height | - |
| Wheelbase | - |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | - |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 230 ci or 3.8 L |
| Cylinders | 4 cylinders |
| Engine power | 82 hp or 61.1 kW |
| Engine RPM | 2200 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | diesel |
| Fuel injection | - |
| Fuel tank size | - |
| Oil capacity | - |
| Oil change | - |
| Starter motor | - |
| Starter volts | 12 V |
| Parts And Accessories | Marshall 802 Parts |
| Batteries number | - |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | - |
| Charging system | alternator |
| Charging Volts | - |
| Charging Amps | 36 amps |
| Trans system | - |
| Trans type | synchromesh |
| Trans gears | 9 forward and 3 reverse |
| Clutch system | 305mm hydraulic dry disc |
| Wheel drive | 4x2 2WD |
| Final drive | spur gear |
| Steering | power |
| Braking system | hydraulic wet disc |
| Cabin type | Cab standard with heat |
| Differentiel lock | mechanical rear |
| System | - |
| Valves | - |
| Pump flow | 14.5 gpm or 54.9 lpm |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | - |
| Hydraulic pressure | 2600 psi or 179.3 bar |
| Max flow | - |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | - |
| Fuel consumption | - |
| Pulling power | - |
| Claimed power | 74 hp or 55.2 kW |
| Real power | - |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | independent |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | - |
| Hitch system | position and draft control |
| Rear hitch | II |
| Rear hitch lift | 5200 lbs or 2358 kg |
| Front hitch | - |
| Front hitch lift | - |
New Holland Workmaster 75
General Infos| Make | New Holland |
| Model | Workmaster 75 |
| Country | United states |
| Production | From 2010 Until 2014 |
| Price | - |
| Tractor type | Utility tractor |
| Fuel | diesel |
| Service repair manual | New Holland Workmaster 75 Manual |
Dimensions, sizes and tires
| AG front tires | 11.2x24 |
| AG rear tires | 16.9x30 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 5,059 lbs or 2294 kg |
| Length | 137.2 inches [348 cm] |
| Width | 78.4 inches [199 cm] |
| Height | 95.3 inches [242 cm] |
| Wheelbase | - |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | 59.7 to 80.2 inches |
| Front tread size | 59.6 to 79.6 inches |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 195 ci or 3.2 L |
| Cylinders | 4 cylinders |
| Engine power | 75 hp or 55.9 kW |
| Engine RPM | 2500 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | diesel |
| Fuel injection | - |
| Fuel tank size | 16 gal or 60.6 L |
| Oil capacity | - |
| Oil change | - |
| Starter motor | electric |
| Starter volts | 12 V |
| Parts And Accessories | New Holland Workmaster 75 Parts |
| Batteries number | - |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | 800 |
| Ground force | negative |
| Charging system | alternator |
| Charging Volts | 12 V |
| Charging Amps | 65 amps |
| Trans system | - |
| Trans type | partially synchronized |
| Trans gears | 8 forward and 2 reverse |
| Clutch system | 11-inch dry organic plate |
| Wheel drive | 4x4 MFWD 4WD |
| Final drive | - |
| Steering | hydrostatic power |
| Braking system | differential mechanical wet disc |
| Cabin type | Two-post foldable ROPS |
| Differentiel lock | mechanical rear lock engaged by foot pedal |
| System | open center fixed displacement |
| Valves | 1 or 2 |
| Pump flow | 10.4 gpm or 39.4 lpm |
| SVC flow | - |
| Steering flow | 8.3 gpm or 31.4 lpm |
| Tank capacity | - |
| Hydraulic pressure | - |
| Max flow | 18.7 gpm or 70.8 lpm |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | - |
| Fuel consumption | - |
| Pulling power | - |
| Claimed power | 65 hp or 48.5 kW |
| Real power | 66.69 hp or 49.7 kW |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | independent |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | 4.0 gal/hour or 15.1 l/hour |
| Hitch system | position control and mechanical draft sensing |
| Rear hitch | 2/1 |
| Rear hitch lift | 3,276 lbs or 1485 kg |
| Front hitch | - |
| Front hitch lift | - |
Related tractor comparison
New Holland Workmaster 75 Chery RS1054F
Marshall 802 Terrion ATM 5280
Marshall 802 New Holland T6050 Elite
New Holland Workmaster 75 Challenger MT675D
New Holland Workmaster 75 Kubota KB21X
New Holland Workmaster 75 Chery RC954
Choose another tractor
Useful links and guides ....
- Marshall provided us with the latest version of its 802 service repair manual
- Find All mechanical and electrical parts and accessories of Marshall 802 farm-tractor here
- Get your New Holland Workmaster 75 manual book version
- Cabine, electrical And mechanical parts for New Holland Workmaster 75 farm-tractor here
