Marshall 802 VS Minneapolis-Moline G-VI specs comparison
Marshall 802
General Infos| Make | Marshall |
| Model | 802 |
| Country | United states |
| Production | From 1982 Until 1984 |
| Price | 20,500 USD |
| Tractor type | Utility tractor |
| Fuel | diesel |
| Service repair manual | Marshall 802 Manual |
Dimensions, sizes and tires
| AG front tires | 7.50x16 |
| AG rear tires | 14.00x34 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 6550 lbs or 2971 kg |
| Length | - |
| Width | - |
| Height | - |
| Wheelbase | - |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | - |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 230 ci or 3.8 L |
| Cylinders | 4 cylinders |
| Engine power | 82 hp or 61.1 kW |
| Engine RPM | 2200 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | diesel |
| Fuel injection | - |
| Fuel tank size | - |
| Oil capacity | - |
| Oil change | - |
| Starter motor | - |
| Starter volts | 12 V |
| Parts And Accessories | Marshall 802 Parts |
| Batteries number | - |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | - |
| Charging system | alternator |
| Charging Volts | - |
| Charging Amps | 36 amps |
| Trans system | - |
| Trans type | synchromesh |
| Trans gears | 9 forward and 3 reverse |
| Clutch system | 305mm hydraulic dry disc |
| Wheel drive | 4x2 2WD |
| Final drive | spur gear |
| Steering | power |
| Braking system | hydraulic wet disc |
| Cabin type | Cab standard with heat |
| Differentiel lock | mechanical rear |
| System | - |
| Valves | - |
| Pump flow | 14.5 gpm or 54.9 lpm |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | - |
| Hydraulic pressure | 2600 psi or 179.3 bar |
| Max flow | - |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | - |
| Fuel consumption | - |
| Pulling power | - |
| Claimed power | 74 hp or 55.2 kW |
| Real power | - |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | independent |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | - |
| Hitch system | position and draft control |
| Rear hitch | II |
| Rear hitch lift | 5200 lbs or 2358 kg |
| Front hitch | - |
| Front hitch lift | - |
Minneapolis-Moline G-VI
General Infos| Make | Minneapolis-Moline |
| Model | G-VI |
| Country | England |
| Production | From 1959 Until 1962 |
| Price | 6,500 USD |
| Tractor type | Standard tread tractor |
| Fuel | gas |
| Service repair manual | Minneapolis-Moline G-VI Manual |
Dimensions, sizes and tires
| AG front tires | 7.50-18 |
| AG rear tires | 18.4-34 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 8,335 lbs or 3780 kg |
| Length | 150.5 inches [382 cm] |
| Width | 82 inches [208 cm] |
| Height | 79.25 inches [201 cm] |
| Wheelbase | 96.375 inches [244 cm] |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | - |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 425.5 ci or 7.0 L |
| Cylinders | 6 cylinders |
| Engine power | - |
| Engine RPM | 1500 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | gas |
| Fuel injection | - |
| Fuel tank size | 38 gal or 143.8 L |
| Oil capacity | 15 qts or 14.2 L |
| Oil change | - |
| Starter motor | - |
| Starter volts | 12 V |
| Parts And Accessories | Minneapolis-Moline G-VI Parts |
| Batteries number | - |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | - |
| Charging system | - |
| Charging Volts | - |
| Charging Amps | - |
| Trans system | - |
| Trans type | gear |
| Trans gears | 5 forward and 1 reverse |
| Clutch system | - |
| Wheel drive | 4x2 2WD |
| Final drive | - |
| Steering | hydraulic power |
| Braking system | differential mechanical dry disc |
| Cabin type | Open operator station |
| Differentiel lock | - |
| System | - |
| Valves | - |
| Pump flow | - |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | - |
| Hydraulic pressure | - |
| Max flow | - |
| Drawbar type | - |
| Claimed power | 70 hp or 52.2 kW |
| Drawbar horsepower | 66.06 hp or 49.3 kW |
| Fuel consumption | 5.3 gal/hour or 20.1 l/hour |
| Pulling power | 9,023 lbs or 4092 kg |
| Claimed power | 78 hp or 58.2 kW |
| Real power | 67.09 hp or 50.0 kW |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | live |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | 4.5 gal/hour or 17.0 l/hour |
| Hitch system | - |
| Rear hitch | - |
| Rear hitch lift | - |
| Front hitch | - |
| Front hitch lift | - |
Related tractor comparison
Marshall 802 Farmall 240
Minneapolis-Moline G-VI International Harvester T-5
Minneapolis-Moline G-VI Allis Chalmers ED40
Minneapolis-Moline G-VI J.I. Case 700
Marshall 802 Massey Ferguson 50
Marshall 802 John Deere 420
Choose another tractor
Useful links and guides ....
- Marshall provided us with the latest version of its 802 service repair manual
- Find All mechanical and electrical parts and accessories of Marshall 802 farm-tractor here
- Get your Minneapolis-Moline G-VI manual book version
- Cabine, electrical And mechanical parts for Minneapolis-Moline G-VI farm-tractor here
