Marshall 802 VS John Deere 1250 specs comparison

Marshall 802
General InfosMake | Marshall |
Model | 802 |
Country | United states |
Production | From 1982 Until 1984 |
Price | 20,500 USD |
Tractor type | Utility tractor |
Fuel | diesel |
Service repair manual | Marshall 802 Manual |
Dimensions, sizes and tires
AG front tires | 7.50x16 |
AG rear tires | 14.00x34 |
Lawn front tires | - |
Lawn rear tires | - |
Indus front tires | - |
Indus rear tires | - |
Weight | 6550 lbs or 2971 kg |
Length | - |
Width | - |
Height | - |
Wheelbase | - |
Ground clearance | - |
Turning radius | - |
Rear tread size | - |
Front tread size | - |
Turning radius | - |
Horsepower and engin specs
Engine capacity | 230 ci or 3.8 L |
Cylinders | 4 cylinders |
Engine power | 82 hp or 61.1 kW |
Engine RPM | 2200 (rpm) |
Torque | - | Torque RPM | - |
Fuel type | diesel |
Fuel injection | - |
Fuel tank size | - |
Oil capacity | - |
Oil change | - |
Starter motor | - |
Starter volts | 12 V |
Parts And Accessories | Marshall 802 Parts |
Batteries number | - |
Batteries voltage | 12 V |
Battries Amps | - |
Cold Amps | - |
Ground force | - |
Charging system | alternator |
Charging Volts | - |
Charging Amps | 36 amps |
Trans system | - |
Trans type | synchromesh |
Trans gears | 9 forward and 3 reverse |
Clutch system | 305mm hydraulic dry disc |
Wheel drive | 4x2 2WD |
Final drive | spur gear |
Steering | power |
Braking system | hydraulic wet disc |
Cabin type | Cab standard with heat |
Differentiel lock | mechanical rear |
System | - |
Valves | - |
Pump flow | 14.5 gpm or 54.9 lpm |
SVC flow | - |
Steering flow | - |
Tank capacity | - |
Hydraulic pressure | 2600 psi or 179.3 bar |
Max flow | - |
Drawbar type | - |
Claimed power | - |
Drawbar horsepower | - |
Fuel consumption | - |
Pulling power | - |
Claimed power | 74 hp or 55.2 kW |
Real power | - |
Engine @RPM | - |
PTO Clutch | - |
Rear PTO | independent |
Rear PTO RPM | 540 (rpm) |
Front PTO | - |
Front PTO RPM | - |
Mid PTO | - |
Mid PTO RPM | - |
Fuel consumption | - |
Hitch system | position and draft control |
Rear hitch | II |
Rear hitch lift | 5200 lbs or 2358 kg |
Front hitch | - |
Front hitch lift | - |

John Deere 1250
General InfosMake | John Deere |
Model | 1250 |
Country | United states |
Production | From 1982 Until 1989 |
Price | - |
Tractor type | Compact Utility tractor |
Fuel | diesel |
Service repair manual | John Deere 1250 Manual |
Dimensions, sizes and tires
AG front tires | 9.5-24 |
AG rear tires | 14.9-28 |
Lawn front tires | - |
Lawn rear tires | - |
Indus front tires | - |
Indus rear tires | - |
Weight | 4125 lbs or 1871 kg |
Length | 134.3 inches [341 cm] |
Width | 65.2 inches [165 cm] |
Height | - |
Wheelbase | 78 inches [198 cm] |
Ground clearance | - |
Turning radius | - |
Rear tread size | 51 to 79 inches |
Front tread size | 55 to 74.8 inches |
Turning radius | - |
Horsepower and engin specs
Engine capacity | 142.7 ci or 2.3 L |
Cylinders | 3 cylinders |
Engine power | 44 hp or 32.8 kW |
Engine RPM | 2500 (rpm) |
Torque | - | Torque RPM | - |
Fuel type | diesel |
Fuel injection | direct injection |
Fuel tank size | 17.2 gal or 65.1 L |
Oil capacity | 11.2 qts or 10.6 L |
Oil change | - |
Starter motor | - |
Starter volts | 12 V |
Parts And Accessories | John Deere 1250 Parts |
Batteries number | 1 |
Batteries voltage | 12 V |
Battries Amps | - |
Cold Amps | - |
Ground force | negative |
Charging system | alternator |
Charging Volts | - |
Charging Amps | 25 amps |
Trans system | - |
Trans type | sliding gear |
Trans gears | 9 forward and 3 reverse |
Clutch system | - |
Wheel drive | 4x2 2WD |
Final drive | inboard planetary |
Steering | power assist |
Braking system | differential hydraulic wet disc |
Cabin type | Two-post ROPS |
Differentiel lock | mechanical |
System | open center |
Valves | 0 to 2 |
Pump flow | 11.2 gpm or 42.4 lpm |
SVC flow | - |
Steering flow | 4.7 gpm or 17.8 lpm |
Tank capacity | - |
Hydraulic pressure | - |
Max flow | 15.9 gpm or 60.2 lpm |
Drawbar type | - |
Claimed power | - |
Drawbar horsepower | 33.44 hp or 24.9 kW |
Fuel consumption | 2.4 gal/hour or 9.1 l/hour |
Pulling power | 5,164 lbs or 2342 kg |
Claimed power | 40 hp or 29.8 kW |
Real power | 40.98 hp or 30.6 kW |
Engine @RPM | - |
PTO Clutch | - |
Rear PTO | continuous |
Rear PTO RPM | 540 (rpm) |
Front PTO | - |
Front PTO RPM | - |
Mid PTO | - |
Mid PTO RPM | - |
Fuel consumption | 2.4 gal/hour or 9.1 l/hour |
Hitch system | center-link draft sensing with position and control |
Rear hitch | II/I |
Rear hitch lift | 2240 lbs or 1016 kg |
Front hitch | - |
Front hitch lift | - |
Related tractor comparison


John Deere 1250 Zetor 7011


John Deere 1250 Renault 461S


Marshall 802 John Deere 750


John Deere 1250 Massey Ferguson 274


Marshall 802 Renault 551S


John Deere 1250 Allis Chalmers 5045
Choose another tractor
Useful links and guides ....
- Marshall provided us with the latest version of its 802 service repair manual
- Find All mechanical and electrical parts and accessories of Marshall 802 farm-tractor here
- Get your John Deere 1250 manual book version
- Cabine, electrical And mechanical parts for John Deere 1250 farm-tractor here