Marshall 802 VS John Deere 1140 specs comparison
Marshall 802
General Infos| Make | Marshall |
| Model | 802 |
| Country | United states |
| Production | From 1982 Until 1984 |
| Price | 20,500 USD |
| Tractor type | Utility tractor |
| Fuel | diesel |
| Service repair manual | Marshall 802 Manual |
Dimensions, sizes and tires
| AG front tires | 7.50x16 |
| AG rear tires | 14.00x34 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 6550 lbs or 2971 kg |
| Length | - |
| Width | - |
| Height | - |
| Wheelbase | - |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | - |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 230 ci or 3.8 L |
| Cylinders | 4 cylinders |
| Engine power | 82 hp or 61.1 kW |
| Engine RPM | 2200 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | diesel |
| Fuel injection | - |
| Fuel tank size | - |
| Oil capacity | - |
| Oil change | - |
| Starter motor | - |
| Starter volts | 12 V |
| Parts And Accessories | Marshall 802 Parts |
| Batteries number | - |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | - |
| Charging system | alternator |
| Charging Volts | - |
| Charging Amps | 36 amps |
| Trans system | - |
| Trans type | synchromesh |
| Trans gears | 9 forward and 3 reverse |
| Clutch system | 305mm hydraulic dry disc |
| Wheel drive | 4x2 2WD |
| Final drive | spur gear |
| Steering | power |
| Braking system | hydraulic wet disc |
| Cabin type | Cab standard with heat |
| Differentiel lock | mechanical rear |
| System | - |
| Valves | - |
| Pump flow | 14.5 gpm or 54.9 lpm |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | - |
| Hydraulic pressure | 2600 psi or 179.3 bar |
| Max flow | - |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | - |
| Fuel consumption | - |
| Pulling power | - |
| Claimed power | 74 hp or 55.2 kW |
| Real power | - |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | independent |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | - |
| Hitch system | position and draft control |
| Rear hitch | II |
| Rear hitch lift | 5200 lbs or 2358 kg |
| Front hitch | - |
| Front hitch lift | - |
John Deere 1140
General Infos| Make | John Deere |
| Model | 1140 |
| Country | United states |
| Production | From 1980 Until 1987 |
| Price | - |
| Tractor type | Utility tractor |
| Fuel | diesel |
| Service repair manual | John Deere 1140 Manual |
Dimensions, sizes and tires
| AG front tires | 7.50-16 |
| AG rear tires | 13.6-3 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 5,300 lbs or 2404 kg |
| Length | 138 inches [350 cm] |
| Width | 71.3 inches [181 cm] |
| Height | 97.3 inches [247 cm] |
| Wheelbase | 80.7 inches [204 cm] |
| Ground clearance | 24.5 inches [62 cm] |
| Turning radius | - |
| Rear tread size | 59.1 to 78.7 inches |
| Front tread size | 49.6 to 81 inches |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 179 ci or 2.9 L |
| Cylinders | 3 cylinders |
| Engine power | 55 hp or 41.0 kW |
| Engine RPM | 2500 (rpm) |
| Torque | 136.4 lb-ft or 185.0 Nm | Torque RPM | 1400 (rpm) |
| Fuel type | diesel |
| Fuel injection | - |
| Fuel tank size | 20.6 gal or 78.0 L |
| Oil capacity | 7.4 qts or 7.0 L |
| Oil change | - |
| Starter motor | - |
| Starter volts | 12 V |
| Parts And Accessories | John Deere 1140 Parts |
| Batteries number | 2 |
| Batteries voltage | 12 V |
| Battries Amps | 55 amps |
| Cold Amps | - |
| Ground force | negative |
| Charging system | alternator |
| Charging Volts | - |
| Charging Amps | 55 amps |
| Trans system | Hi-Lo |
| Trans type | two-speed power shift |
| Trans gears | 16 forward and 8 reverse |
| Clutch system | - |
| Wheel drive | 4x2 2WD |
| Final drive | - |
| Steering | power |
| Braking system | hydraulic wet disc |
| Cabin type | Four-post ROPS |
| Differentiel lock | - |
| System | closed center constant pressure |
| Valves | - |
| Pump flow | 12.4 gpm or 46.9 lpm |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | 14.5 gal or 54.9 L |
| Hydraulic pressure | 2466 psi or 170.0 bar |
| Max flow | - |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | - |
| Fuel consumption | - |
| Pulling power | - |
| Claimed power | 49.6 hp or 37.0 kW |
| Real power | - |
| Engine @RPM | 540@2400 (rpm) |
| PTO Clutch | hydraulic disc |
| Rear PTO | independent |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | - |
| Hitch system | lower-link draft control |
| Rear hitch | II/I |
| Rear hitch lift | 5291 lbs or 2399 kg |
| Front hitch | - |
| Front hitch lift | - |
Related tractor comparison
John Deere 1140 International Harvester 3388
Marshall 802 International Harvester 234
Marshall 802 Versatile 150
Marshall 802 Schluter Super-Trac 1600 TVL
John Deere 1140 Fendt Favorit 610LS
John Deere 1140 Steiger Panther CP-1400
Choose another tractor
Useful links and guides ....
- Marshall provided us with the latest version of its 802 service repair manual
- Find All mechanical and electrical parts and accessories of Marshall 802 farm-tractor here
- Get your John Deere 1140 manual book version
- Cabine, electrical And mechanical parts for John Deere 1140 farm-tractor here
