Marshall 802 VS J.I. Case 301 specs comparison
Marshall 802
General Infos| Make | Marshall |
| Model | 802 |
| Country | United states |
| Production | From 1982 Until 1984 |
| Price | 20,500 USD |
| Tractor type | Utility tractor |
| Fuel | diesel |
| Service repair manual | Marshall 802 Manual |
Dimensions, sizes and tires
| AG front tires | 7.50x16 |
| AG rear tires | 14.00x34 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 6550 lbs or 2971 kg |
| Length | - |
| Width | - |
| Height | - |
| Wheelbase | - |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | - |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 230 ci or 3.8 L |
| Cylinders | 4 cylinders |
| Engine power | 82 hp or 61.1 kW |
| Engine RPM | 2200 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | diesel |
| Fuel injection | - |
| Fuel tank size | - |
| Oil capacity | - |
| Oil change | - |
| Starter motor | - |
| Starter volts | 12 V |
| Parts And Accessories | Marshall 802 Parts |
| Batteries number | - |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | - |
| Charging system | alternator |
| Charging Volts | - |
| Charging Amps | 36 amps |
| Trans system | - |
| Trans type | synchromesh |
| Trans gears | 9 forward and 3 reverse |
| Clutch system | 305mm hydraulic dry disc |
| Wheel drive | 4x2 2WD |
| Final drive | spur gear |
| Steering | power |
| Braking system | hydraulic wet disc |
| Cabin type | Cab standard with heat |
| Differentiel lock | mechanical rear |
| System | - |
| Valves | - |
| Pump flow | 14.5 gpm or 54.9 lpm |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | - |
| Hydraulic pressure | 2600 psi or 179.3 bar |
| Max flow | - |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | - |
| Fuel consumption | - |
| Pulling power | - |
| Claimed power | 74 hp or 55.2 kW |
| Real power | - |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | independent |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | - |
| Hitch system | position and draft control |
| Rear hitch | II |
| Rear hitch lift | 5200 lbs or 2358 kg |
| Front hitch | - |
| Front hitch lift | - |
J.I. Case 301
General Infos| Make | J.I. Case |
| Model | 301 |
| Country | Unites states |
| Production | From 1956 Until 1958 |
| Price | 3,600 USD |
| Tractor type | Row Crop tractor |
| Fuel | diesel |
| Service repair manual | J.I. Case 301 Manual |
Dimensions, sizes and tires
| AG front tires | 5.50x16 |
| AG rear tires | 11x28 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 3,750 lbs or 1701 kg |
| Length | 125 inches [317 cm] |
| Width | - |
| Height | 61 inches [154 cm] |
| Wheelbase | 79.7 inches [202 cm] |
| Ground clearance | 21 inches [53 cm] |
| Turning radius | - |
| Rear tread size | 48 to 88 inches |
| Front tread size | 6.4.11.7 (tricycle) to inches |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 157 ci or 2.6 L |
| Cylinders | 4 cylinders |
| Engine power | - |
| Engine RPM | 1750 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | diesel |
| Fuel injection | - |
| Fuel tank size | 13 gal or 49.2 L |
| Oil capacity | - |
| Oil change | - |
| Starter motor | - |
| Starter volts | 12 V |
| Parts And Accessories | J.I. Case 301 Parts |
| Batteries number | 2 |
| Batteries voltage | 6 V |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | - |
| Charging system | - |
| Charging Volts | - |
| Charging Amps | - |
| Trans system | Tripl-Range |
| Trans type | sliding gear |
| Trans gears | 12 forward and 3 reverse |
| Clutch system | 234.9mm dry disc (master foot clutch) |
| Wheel drive | 4x2 2WD |
| Final drive | - |
| Steering | manual |
| Braking system | 6-inch disc |
| Cabin type | Open operator station |
| Differentiel lock | - |
| System | Duo-Control |
| Valves | 1 |
| Pump flow | - |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | - |
| Hydraulic pressure | - |
| Max flow | - |
| Drawbar type | - |
| Claimed power | 22 hp or 16.4 kW |
| Drawbar horsepower | 26.31 hp or 19.6 kW |
| Fuel consumption | - |
| Pulling power | 4,067 lbs or 1844 kg |
| Claimed power | - |
| Real power | - |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | transmission |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | - |
| Hitch system | - |
| Rear hitch | - |
| Rear hitch lift | - |
| Front hitch | - |
| Front hitch lift | - |
Related tractor comparison
J.I. Case 301 Minneapolis-Moline UB
J.I. Case 301 Unimog 30
Marshall 802 Valmet 20
J.I. Case 301 Steiger Steiger1
Marshall 802 J.I. Case 312
J.I. Case 301 Ford 541
Choose another tractor
Useful links and guides ....
- Marshall provided us with the latest version of its 802 service repair manual
- Find All mechanical and electrical parts and accessories of Marshall 802 farm-tractor here
- Get your J.I. Case 301 manual book version
- Cabine, electrical And mechanical parts for J.I. Case 301 farm-tractor here
