Marshall 802 VS International Harvester 5088 specs comparison
Marshall 802
General Infos| Make | Marshall |
| Model | 802 |
| Country | United states |
| Production | From 1982 Until 1984 |
| Price | 20,500 USD |
| Tractor type | Utility tractor |
| Fuel | diesel |
| Service repair manual | Marshall 802 Manual |
Dimensions, sizes and tires
| AG front tires | 7.50x16 |
| AG rear tires | 14.00x34 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 6550 lbs or 2971 kg |
| Length | - |
| Width | - |
| Height | - |
| Wheelbase | - |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | - |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 230 ci or 3.8 L |
| Cylinders | 4 cylinders |
| Engine power | 82 hp or 61.1 kW |
| Engine RPM | 2200 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | diesel |
| Fuel injection | - |
| Fuel tank size | - |
| Oil capacity | - |
| Oil change | - |
| Starter motor | - |
| Starter volts | 12 V |
| Parts And Accessories | Marshall 802 Parts |
| Batteries number | - |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | - |
| Charging system | alternator |
| Charging Volts | - |
| Charging Amps | 36 amps |
| Trans system | - |
| Trans type | synchromesh |
| Trans gears | 9 forward and 3 reverse |
| Clutch system | 305mm hydraulic dry disc |
| Wheel drive | 4x2 2WD |
| Final drive | spur gear |
| Steering | power |
| Braking system | hydraulic wet disc |
| Cabin type | Cab standard with heat |
| Differentiel lock | mechanical rear |
| System | - |
| Valves | - |
| Pump flow | 14.5 gpm or 54.9 lpm |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | - |
| Hydraulic pressure | 2600 psi or 179.3 bar |
| Max flow | - |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | - |
| Fuel consumption | - |
| Pulling power | - |
| Claimed power | 74 hp or 55.2 kW |
| Real power | - |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | independent |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | - |
| Hitch system | position and draft control |
| Rear hitch | II |
| Rear hitch lift | 5200 lbs or 2358 kg |
| Front hitch | - |
| Front hitch lift | - |
International Harvester 5088
General Infos| Make | International Harvester |
| Model | 5088 |
| Country | United states |
| Production | From 1981 Until 1985 |
| Price | 54,300 USD |
| Tractor type | Row Crop tractor |
| Fuel | diesel |
| Service repair manual | International Harvester 5088 Manual |
Dimensions, sizes and tires
| AG front tires | 10.00-16 |
| AG rear tires | 18.4-38 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 13,765 lbs or 6243 kg |
| Length | 196.6 inches [499 cm] |
| Width | 112 inches [284 cm] |
| Height | 115 inches [292 cm] |
| Wheelbase | 111.6 inches [283 cm] |
| Ground clearance | 17.2 inches [43 cm] |
| Turning radius | 14.2 feet [4.3 m] |
| Rear tread size | - |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 436 ci or 7.1 L |
| Cylinders | 6 cylinders |
| Engine power | - |
| Engine RPM | 2400 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | diesel |
| Fuel injection | - |
| Fuel tank size | 70 gal or 264.9 L |
| Oil capacity | 20 qts or 18.9 L |
| Oil change | - |
| Starter motor | - |
| Starter volts | - |
| Parts And Accessories | International Harvester 5088 Parts |
| Batteries number | - |
| Batteries voltage | - |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | - |
| Charging system | - |
| Charging Volts | - |
| Charging Amps | - |
| Trans system | Synchro Tri-Six (STS) |
| Trans type | partial power shift |
| Trans gears | 18 forward and 6 reverse |
| Clutch system | - |
| Wheel drive | 4x2 2WD |
| Final drive | - |
| Steering | hydrostatic power |
| Braking system | wet disc |
| Cabin type | Cab standard with heat and A/C |
| Differentiel lock | - |
| System | closed center |
| Valves | 2 |
| Pump flow | 25 gpm or 94.6 lpm |
| SVC flow | - |
| Steering flow | 12 gpm or 45.4 lpm |
| Tank capacity | 43.5 gal or 164.6 L |
| Hydraulic pressure | - |
| Max flow | 67 gpm or 253.6 lpm |
| Drawbar type | - |
| Claimed power | 119 hp or 88.7 kW |
| Drawbar horsepower | 116.19 hp or 86.6 kW |
| Fuel consumption | 8.8 gal/hour or 33.3 l/hour |
| Pulling power | 14,960 lbs or 6785 kg |
| Claimed power | 135 hp or 100.7 kW |
| Real power | 136.12 hp or 101.5 kW |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | independent |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | 8.9 gal/hour or 33.7 l/hour |
| Hitch system | - |
| Rear hitch | 3 |
| Rear hitch lift | 6,990 lbs or 3170 kg |
| Front hitch | - |
| Front hitch lift | - |
Related tractor comparison
International Harvester 5088 International Harvester 244
Marshall 802 International Harvester 885
International Harvester 5088 Iseki TX1300
International Harvester 5088 Big Bud 525/50
International Harvester 5088 Allis Chalmers 5030
International Harvester 5088 Kubota B1902
Choose another tractor
Useful links and guides ....
- Marshall provided us with the latest version of its 802 service repair manual
- Find All mechanical and electrical parts and accessories of Marshall 802 farm-tractor here
- Get your International Harvester 5088 manual book version
- Cabine, electrical And mechanical parts for International Harvester 5088 farm-tractor here
