Marshall 802 VS Deutz-Fahr 5130 specs comparison
Marshall 802
General Infos| Make | Marshall |
| Model | 802 |
| Country | United states |
| Production | From 1982 Until 1984 |
| Price | 20,500 USD |
| Tractor type | Utility tractor |
| Fuel | diesel |
| Service repair manual | Marshall 802 Manual |
Dimensions, sizes and tires
| AG front tires | 7.50x16 |
| AG rear tires | 14.00x34 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 6550 lbs or 2971 kg |
| Length | - |
| Width | - |
| Height | - |
| Wheelbase | - |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | - |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 230 ci or 3.8 L |
| Cylinders | 4 cylinders |
| Engine power | 82 hp or 61.1 kW |
| Engine RPM | 2200 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | diesel |
| Fuel injection | - |
| Fuel tank size | - |
| Oil capacity | - |
| Oil change | - |
| Starter motor | - |
| Starter volts | 12 V |
| Parts And Accessories | Marshall 802 Parts |
| Batteries number | - |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | - |
| Charging system | alternator |
| Charging Volts | - |
| Charging Amps | 36 amps |
| Trans system | - |
| Trans type | synchromesh |
| Trans gears | 9 forward and 3 reverse |
| Clutch system | 305mm hydraulic dry disc |
| Wheel drive | 4x2 2WD |
| Final drive | spur gear |
| Steering | power |
| Braking system | hydraulic wet disc |
| Cabin type | Cab standard with heat |
| Differentiel lock | mechanical rear |
| System | - |
| Valves | - |
| Pump flow | 14.5 gpm or 54.9 lpm |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | - |
| Hydraulic pressure | 2600 psi or 179.3 bar |
| Max flow | - |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | - |
| Fuel consumption | - |
| Pulling power | - |
| Claimed power | 74 hp or 55.2 kW |
| Real power | - |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | independent |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | - |
| Hitch system | position and draft control |
| Rear hitch | II |
| Rear hitch lift | 5200 lbs or 2358 kg |
| Front hitch | - |
| Front hitch lift | - |
Deutz-Fahr 5130
General Infos| Make | Deutz-Fahr |
| Model | 5130 |
| Country | Germany |
| Production | From 2013 Until 2017 |
| Price | - |
| Tractor type | Utility tractor |
| Fuel | diesel |
| Service repair manual | Deutz-Fahr 5130 Manual |
Dimensions, sizes and tires
| AG front tires | 440/65R28 |
| AG rear tires | 540/65R38 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 10957 lbs or 4970 kg |
| Length | 168.1 inches [426 cm] |
| Width | 95.6 inches [242 cm] |
| Height | 107.9 inches [274 cm] |
| Wheelbase | 96.1 inches [244 cm] |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | 72.8 inches |
| Front tread size | 73.6 to 76 inches |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 220.9 ci or 3.6 L |
| Cylinders | 4 cylinders |
| Engine power | 124.7 hp or 93.0 kW |
| Engine RPM | 2200 (rpm) |
| Torque | 354 lb-ft or 480.0 Nm | Torque RPM | 1600 (rpm) |
| Fuel type | diesel |
| Fuel injection | common rail |
| Fuel tank size | 53.6 gal or 202.9 L |
| Oil capacity | 10.6 qts or 10.0 L |
| Oil change | 500 h |
| Starter motor | electric |
| Starter volts | 12 V |
| Parts And Accessories | Deutz-Fahr 5130 Parts |
| Batteries number | - |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | - |
| Charging system | alternator |
| Charging Volts | - |
| Charging Amps | - |
| Trans system | ZF TTV |
| Trans type | infinitely variable transmission |
| Trans gears | infinite forward and reverse |
| Clutch system | - |
| Wheel drive | 4x4 MFWD 4WD |
| Final drive | - |
| Steering | power |
| Braking system | wet disc |
| Cabin type | Cab standard with air-conditioning |
| Differentiel lock | - |
| System | - |
| Valves | - |
| Pump flow | 15.85 gpm or 60.0 lpm |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | - |
| Hydraulic pressure | 2683 psi or 185.0 bar |
| Max flow | - |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | - |
| Fuel consumption | - |
| Pulling power | - |
| Claimed power | - |
| Real power | - |
| Engine @RPM | - |
| PTO Clutch | electro-hydraulic |
| Rear PTO | independent |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | independent |
| Front PTO RPM | 1000 (rpm) |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | - |
| Hitch system | - |
| Rear hitch | II |
| Rear hitch lift | 10251.5 lbs or 4650 kg |
| Front hitch | - |
| Front hitch lift | 4078.6 lbs or 1850 kg |
Related tractor comparison
Marshall 802 New Holland TS6.140
Deutz-Fahr 5130 Deutz-Fahr 6140.4 TTV
Deutz-Fahr 5130 Challenger MT585B
Marshall 802 Chery RS1104
Deutz-Fahr 5130 Deutz-Fahr 7250 TTV
Marshall 802 John Deere 7215R
Choose another tractor
Useful links and guides ....
- Marshall provided us with the latest version of its 802 service repair manual
- Find All mechanical and electrical parts and accessories of Marshall 802 farm-tractor here
- Get your Deutz-Fahr 5130 manual book version
- Cabine, electrical And mechanical parts for Deutz-Fahr 5130 farm-tractor here
