Marshall 802 VS Allis Chalmers 7040 specs comparison

Marshall 802
General InfosMake | Marshall |
Model | 802 |
Country | United states |
Production | From 1982 Until 1984 |
Price | 20,500 USD |
Tractor type | Utility tractor |
Fuel | diesel |
Service repair manual | Marshall 802 Manual |
Dimensions, sizes and tires
AG front tires | 7.50x16 |
AG rear tires | 14.00x34 |
Lawn front tires | - |
Lawn rear tires | - |
Indus front tires | - |
Indus rear tires | - |
Weight | 6550 lbs or 2971 kg |
Length | - |
Width | - |
Height | - |
Wheelbase | - |
Ground clearance | - |
Turning radius | - |
Rear tread size | - |
Front tread size | - |
Turning radius | - |
Horsepower and engin specs
Engine capacity | 230 ci or 3.8 L |
Cylinders | 4 cylinders |
Engine power | 82 hp or 61.1 kW |
Engine RPM | 2200 (rpm) |
Torque | - | Torque RPM | - |
Fuel type | diesel |
Fuel injection | - |
Fuel tank size | - |
Oil capacity | - |
Oil change | - |
Starter motor | - |
Starter volts | 12 V |
Parts And Accessories | Marshall 802 Parts |
Batteries number | - |
Batteries voltage | 12 V |
Battries Amps | - |
Cold Amps | - |
Ground force | - |
Charging system | alternator |
Charging Volts | - |
Charging Amps | 36 amps |
Trans system | - |
Trans type | synchromesh |
Trans gears | 9 forward and 3 reverse |
Clutch system | 305mm hydraulic dry disc |
Wheel drive | 4x2 2WD |
Final drive | spur gear |
Steering | power |
Braking system | hydraulic wet disc |
Cabin type | Cab standard with heat |
Differentiel lock | mechanical rear |
System | - |
Valves | - |
Pump flow | 14.5 gpm or 54.9 lpm |
SVC flow | - |
Steering flow | - |
Tank capacity | - |
Hydraulic pressure | 2600 psi or 179.3 bar |
Max flow | - |
Drawbar type | - |
Claimed power | - |
Drawbar horsepower | - |
Fuel consumption | - |
Pulling power | - |
Claimed power | 74 hp or 55.2 kW |
Real power | - |
Engine @RPM | - |
PTO Clutch | - |
Rear PTO | independent |
Rear PTO RPM | 540 (rpm) |
Front PTO | - |
Front PTO RPM | - |
Mid PTO | - |
Mid PTO RPM | - |
Fuel consumption | - |
Hitch system | position and draft control |
Rear hitch | II |
Rear hitch lift | 5200 lbs or 2358 kg |
Front hitch | - |
Front hitch lift | - |

Allis Chalmers 7040
General InfosMake | Allis Chalmers |
Model | 7040 |
Country | United states |
Production | From 1975 Until 1977 |
Price | 24,550 USD |
Tractor type | - |
Fuel | diesel |
Service repair manual | Allis Chalmers 7040 Manual |
Dimensions, sizes and tires
AG front tires | 10.00-16 |
AG rear tires | 20.8-38 |
Lawn front tires | - |
Lawn rear tires | - |
Indus front tires | - |
Indus rear tires | - |
Weight | 11,700 lbs or 5307 kg |
Length | 173.6 inches [440 cm] |
Width | 95.5 inches [242 cm] |
Height | - |
Wheelbase | 106 inches [269 cm] |
Ground clearance | - |
Turning radius | - |
Rear tread size | 64 to 91 inches |
Front tread size | 62 to 88 inches |
Turning radius | - |
Horsepower and engin specs
Engine capacity | 426 ci or 7.0 L |
Cylinders | 6 cylinders |
Engine power | - |
Engine RPM | 2300 (rpm) |
Torque | - | Torque RPM | - |
Fuel type | diesel |
Fuel injection | - |
Fuel tank size | 51 gal or 193.0 L |
Oil capacity | 19 qts or 18.0 L |
Oil change | - |
Starter motor | - |
Starter volts | 12 V |
Parts And Accessories | Allis Chalmers 7040 Parts |
Batteries number | - |
Batteries voltage | 12 V |
Battries Amps | - |
Cold Amps | - |
Ground force | - |
Charging system | alternator |
Charging Volts | - |
Charging Amps | - |
Trans system | Power Shift |
Trans type | partial power shift |
Trans gears | 12 forward and 2 reverse |
Clutch system | - |
Wheel drive | 4x2 2WD |
Final drive | - |
Steering | hydrostatic power |
Braking system | differential hydraulic wet disc |
Cabin type | Acousta cab standard with heater |
Differentiel lock | power standard |
System | closed center |
Valves | 2 or 3 |
Pump flow | 22 gpm or 83.3 lpm |
SVC flow | - |
Steering flow | - |
Tank capacity | 24.1 gal or 91.2 L |
Hydraulic pressure | - |
Max flow | 45 gpm or 170.3 lpm |
Drawbar type | - |
Claimed power | 117 hp or 87.2 kW |
Drawbar horsepower | 114.34 hp or 85.3 kW |
Fuel consumption | 8.8 gal/hour or 33.3 l/hour |
Pulling power | 13,547 lbs or 6144 kg |
Claimed power | 136 hp or 101.4 kW |
Real power | 136.15 hp or 101.5 kW |
Engine @RPM | - |
PTO Clutch | - |
Rear PTO | independent |
Rear PTO RPM | 540 (rpm) |
Front PTO | - |
Front PTO RPM | - |
Mid PTO | - |
Mid PTO RPM | - |
Fuel consumption | 8.8 gal/hour or 33.3 l/hour |
Hitch system | - |
Rear hitch | III/II |
Rear hitch lift | - |
Front hitch | - |
Front hitch lift | - |
Related tractor comparison


Marshall 802 Big Bud HN320


Allis Chalmers 7040 Ford 7700


Marshall 802 Renault 421


Marshall 802 International Harvester 955


Allis Chalmers 7040 Ford 1000


Marshall 802 Hinomoto E25
Choose another tractor
Useful links and guides ....
- Marshall provided us with the latest version of its 802 service repair manual
- Find All mechanical and electrical parts and accessories of Marshall 802 farm-tractor here
- Get your Allis Chalmers 7040 manual book version
- Cabine, electrical And mechanical parts for Allis Chalmers 7040 farm-tractor here