Marshall 802 VS Allis Chalmers 5050 specs comparison

Marshall 802
General InfosMake | Marshall |
Model | 802 |
Country | United states |
Production | From 1982 Until 1984 |
Price | 20,500 USD |
Tractor type | Utility tractor |
Fuel | diesel |
Service repair manual | Marshall 802 Manual |
Dimensions, sizes and tires
AG front tires | 7.50x16 |
AG rear tires | 14.00x34 |
Lawn front tires | - |
Lawn rear tires | - |
Indus front tires | - |
Indus rear tires | - |
Weight | 6550 lbs or 2971 kg |
Length | - |
Width | - |
Height | - |
Wheelbase | - |
Ground clearance | - |
Turning radius | - |
Rear tread size | - |
Front tread size | - |
Turning radius | - |
Horsepower and engin specs
Engine capacity | 230 ci or 3.8 L |
Cylinders | 4 cylinders |
Engine power | 82 hp or 61.1 kW |
Engine RPM | 2200 (rpm) |
Torque | - | Torque RPM | - |
Fuel type | diesel |
Fuel injection | - |
Fuel tank size | - |
Oil capacity | - |
Oil change | - |
Starter motor | - |
Starter volts | 12 V |
Parts And Accessories | Marshall 802 Parts |
Batteries number | - |
Batteries voltage | 12 V |
Battries Amps | - |
Cold Amps | - |
Ground force | - |
Charging system | alternator |
Charging Volts | - |
Charging Amps | 36 amps |
Trans system | - |
Trans type | synchromesh |
Trans gears | 9 forward and 3 reverse |
Clutch system | 305mm hydraulic dry disc |
Wheel drive | 4x2 2WD |
Final drive | spur gear |
Steering | power |
Braking system | hydraulic wet disc |
Cabin type | Cab standard with heat |
Differentiel lock | mechanical rear |
System | - |
Valves | - |
Pump flow | 14.5 gpm or 54.9 lpm |
SVC flow | - |
Steering flow | - |
Tank capacity | - |
Hydraulic pressure | 2600 psi or 179.3 bar |
Max flow | - |
Drawbar type | - |
Claimed power | - |
Drawbar horsepower | - |
Fuel consumption | - |
Pulling power | - |
Claimed power | 74 hp or 55.2 kW |
Real power | - |
Engine @RPM | - |
PTO Clutch | - |
Rear PTO | independent |
Rear PTO RPM | 540 (rpm) |
Front PTO | - |
Front PTO RPM | - |
Mid PTO | - |
Mid PTO RPM | - |
Fuel consumption | - |
Hitch system | position and draft control |
Rear hitch | II |
Rear hitch lift | 5200 lbs or 2358 kg |
Front hitch | - |
Front hitch lift | - |

Allis Chalmers 5050
General InfosMake | Allis Chalmers |
Model | 5050 |
Country | United states |
Production | From 1977 Until 1983 |
Price | 20,720 USD |
Tractor type | Utility tractor |
Fuel | diesel |
Service repair manual | Allis Chalmers 5050 Manual |
Dimensions, sizes and tires
AG front tires | 7.50-16 |
AG rear tires | 14.9-28 |
Lawn front tires | - |
Lawn rear tires | - |
Indus front tires | - |
Indus rear tires | - |
Weight | 4150 lbs or 1882 kg |
Length | 124.7 inches [316 cm] |
Width | 67 inches [170 cm] |
Height | - |
Wheelbase | 76.7 inches [194 cm] |
Ground clearance | 12.5 inches [31 cm] |
Turning radius | - |
Rear tread size | 56 to 79 inches |
Front tread size | 53.2 to 77.2 inches |
Turning radius | - |
Horsepower and engin specs
Engine capacity | 167.8 ci or 2.8 L |
Cylinders | 3 cylinders |
Engine power | - |
Engine RPM | 2700 (rpm) |
Torque | - | Torque RPM | - |
Fuel type | diesel |
Fuel injection | - |
Fuel tank size | 14.25 gal or 53.9 L |
Oil capacity | 8.1 qts or 7.7 L |
Oil change | - |
Starter motor | - |
Starter volts | 12 V |
Parts And Accessories | Allis Chalmers 5050 Parts |
Batteries number | 1 |
Batteries voltage | 12 V |
Battries Amps | - |
Cold Amps | - |
Ground force | negative |
Charging system | alternator |
Charging Volts | - |
Charging Amps | 37 amps |
Trans system | - |
Trans type | partially synchronized |
Trans gears | 12 forward and 3 reverse |
Clutch system | - |
Wheel drive | 4x2 2WD |
Final drive | - |
Steering | power assist |
Braking system | differential mechanical contracting band |
Cabin type | Open operator station |
Differentiel lock | - |
System | open center |
Valves | 1 |
Pump flow | 6.47 gpm or 24.5 lpm |
SVC flow | - |
Steering flow | - |
Tank capacity | 4.75 gal or 18.0 L |
Hydraulic pressure | - |
Max flow | - |
Drawbar type | - |
Claimed power | - |
Drawbar horsepower | 43.29 hp or 32.3 kW |
Fuel consumption | 3.4 gal/hour or 12.9 l/hour |
Pulling power | 6,075 lbs or 2755 kg |
Claimed power | 50 hp or 37.3 kW |
Real power | 47.16 hp or 35.2 kW |
Engine @RPM | - |
PTO Clutch | - |
Rear PTO | independent |
Rear PTO RPM | 540 (rpm) |
Front PTO | - |
Front PTO RPM | - |
Mid PTO | - |
Mid PTO RPM | - |
Fuel consumption | 2.9 gal/hour or 11.0 l/hour |
Hitch system | - |
Rear hitch | II/I |
Rear hitch lift | 3200 lbs or 1451 kg |
Front hitch | - |
Front hitch lift | - |
Related tractor comparison


Marshall 802 Ford TW-10


Allis Chalmers 5050 Massey Ferguson 1505


Allis Chalmers 5050 Müller TM17


Marshall 802 Massey Ferguson 595


Allis Chalmers 5050 J.I. Case 2090


Marshall 802 Belarus 400A
Choose another tractor
Useful links and guides ....
- Marshall provided us with the latest version of its 802 service repair manual
- Find All mechanical and electrical parts and accessories of Marshall 802 farm-tractor here
- Get your Allis Chalmers 5050 manual book version
- Cabine, electrical And mechanical parts for Allis Chalmers 5050 farm-tractor here