Marshall 802 VS Allis Chalmers 200 specs comparison
Marshall 802
General Infos| Make | Marshall |
| Model | 802 |
| Country | United states |
| Production | From 1982 Until 1984 |
| Price | 20,500 USD |
| Tractor type | Utility tractor |
| Fuel | diesel |
| Service repair manual | Marshall 802 Manual |
Dimensions, sizes and tires
| AG front tires | 7.50x16 |
| AG rear tires | 14.00x34 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 6550 lbs or 2971 kg |
| Length | - |
| Width | - |
| Height | - |
| Wheelbase | - |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | - |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 230 ci or 3.8 L |
| Cylinders | 4 cylinders |
| Engine power | 82 hp or 61.1 kW |
| Engine RPM | 2200 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | diesel |
| Fuel injection | - |
| Fuel tank size | - |
| Oil capacity | - |
| Oil change | - |
| Starter motor | - |
| Starter volts | 12 V |
| Parts And Accessories | Marshall 802 Parts |
| Batteries number | - |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | - |
| Charging system | alternator |
| Charging Volts | - |
| Charging Amps | 36 amps |
| Trans system | - |
| Trans type | synchromesh |
| Trans gears | 9 forward and 3 reverse |
| Clutch system | 305mm hydraulic dry disc |
| Wheel drive | 4x2 2WD |
| Final drive | spur gear |
| Steering | power |
| Braking system | hydraulic wet disc |
| Cabin type | Cab standard with heat |
| Differentiel lock | mechanical rear |
| System | - |
| Valves | - |
| Pump flow | 14.5 gpm or 54.9 lpm |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | - |
| Hydraulic pressure | 2600 psi or 179.3 bar |
| Max flow | - |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | - |
| Fuel consumption | - |
| Pulling power | - |
| Claimed power | 74 hp or 55.2 kW |
| Real power | - |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | independent |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | - |
| Hitch system | position and draft control |
| Rear hitch | II |
| Rear hitch lift | 5200 lbs or 2358 kg |
| Front hitch | - |
| Front hitch lift | - |
Allis Chalmers 200
General Infos| Make | Allis Chalmers |
| Model | 200 |
| Country | United states |
| Production | From 1972 Until 1975 |
| Price | 14,125 USD |
| Tractor type | Row Crop tractor |
| Fuel | diesel |
| Service repair manual | Allis Chalmers 200 Manual |
Dimensions, sizes and tires
| AG front tires | 7.50-16 |
| AG rear tires | 16.9-34 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 7,324 lbs or 3322 kg |
| Length | 175.5 inches [445 cm] |
| Width | 87.625 inches [222 cm] |
| Height | 117.5 inches [298 cm] |
| Wheelbase | - |
| Ground clearance | 15.875 inches [40 cm] |
| Turning radius | - |
| Rear tread size | - |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 301 ci or 4.9 L |
| Cylinders | 6 cylinders |
| Engine power | - |
| Engine RPM | 2200 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | diesel |
| Fuel injection | - |
| Fuel tank size | 48 gal or 181.7 L |
| Oil capacity | 15 qts or 14.2 L |
| Oil change | - |
| Starter motor | - |
| Starter volts | 12 V |
| Parts And Accessories | Allis Chalmers 200 Parts |
| Batteries number | 1 |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | negative |
| Charging system | alternator |
| Charging Volts | - |
| Charging Amps | 32 amps |
| Trans system | - |
| Trans type | constant mesh-helical gears |
| Trans gears | 8 forward and 2 reverse |
| Clutch system | - |
| Wheel drive | 4x2 2WD |
| Final drive | - |
| Steering | power |
| Braking system | ball actuated disc |
| Cabin type | Open operator station |
| Differentiel lock | - |
| System | open center |
| Valves | 2 |
| Pump flow | 17.2 gpm or 65.1 lpm |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | 7 gal or 26.5 L |
| Hydraulic pressure | 2300 psi or 158.6 bar |
| Max flow | 21.02 gpm or 79.6 lpm |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | 79.12 hp or 59.0 kW |
| Fuel consumption | 5.7 gal/hour or 21.6 l/hour |
| Pulling power | 8,917 lbs or 4044 kg |
| Claimed power | - |
| Real power | 89.71 hp or 66.9 kW |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | - |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | 5.3 gal/hour or 20.1 l/hour |
| Hitch system | - |
| Rear hitch | II |
| Rear hitch lift | 4,600 lbs or 2086 kg |
| Front hitch | - |
| Front hitch lift | - |
Related tractor comparison
Marshall 802 Massey Ferguson 1135
Allis Chalmers 200 International Harvester 844
Allis Chalmers 200 International Harvester 966
Allis Chalmers 200 Schluter Compact 750
Allis Chalmers 200 Farmall 1456
Marshall 802 Cockshutt 1855
Choose another tractor
Useful links and guides ....
- Marshall provided us with the latest version of its 802 service repair manual
- Find All mechanical and electrical parts and accessories of Marshall 802 farm-tractor here
- Get your Allis Chalmers 200 manual book version
- Cabine, electrical And mechanical parts for Allis Chalmers 200 farm-tractor here