John Deere 8110T VS Holder Cultitrac A12 specs comparison
John Deere 8110T
General Infos| Make | John Deere |
| Model | 8110T |
| Country | United states |
| Production | From 2000 Until 2001 |
| Price | - |
| Tractor type | Agricultural Crawler tractor |
| Fuel | - |
| Service repair manual | John Deere 8110T Manual |
Dimensions, sizes and tires
| AG front tires | 18, 24, 30-inch tracks |
| AG rear tires | 18, 24, 30-inch tracks |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 23,650 lbs or 10727 kg |
| Length | 207 inches [525 cm] |
| Width | 103.7 inches [263 cm] (minimum) |
| Height | 122.9 inches [312 cm] (cab) |
| Wheelbase | 89 inches [226 cm] |
| Ground clearance | 17.7 inches [44 cm] (drawbar) |
| Turning radius | 0 feet [0.0 m] |
| Rear tread size | - |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 496 ci or 8.1 L |
| Cylinders | 6 cylinders |
| Engine power | - |
| Engine RPM | 2200 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | - |
| Fuel injection | - |
| Fuel tank size | 130 gal or 492.1 L |
| Oil capacity | 22.7 qts or 21.5 L |
| Oil change | - |
| Starter motor | - |
| Starter volts | 12 V |
| Parts And Accessories | John Deere 8110T Parts |
| Batteries number | 2 |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | 1850 |
| Ground force | - |
| Charging system | alternator |
| Charging Volts | - |
| Charging Amps | 140 amps |
| Trans system | - |
| Trans type | full powershift |
| Trans gears | 16 forward and 4 reverse |
| Clutch system | - |
| Wheel drive | crawler |
| Final drive | - |
| Steering | hydrostatic |
| Braking system | hydraulic wet disc |
| Cabin type | CommandView cab standard with heat and A/C |
| Differentiel lock | - |
| System | pressure/flow compensated |
| Valves | 3 to 5 |
| Pump flow | 30 gpm or 113.6 lpm |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | 65 gal or 246.0 L |
| Hydraulic pressure | 2900 psi or 200.0 bar |
| Max flow | 33.5 gpm or 126.8 lpm |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | - |
| Fuel consumption | - |
| Pulling power | - |
| Claimed power | 165 hp or 123.0 kW |
| Real power | - |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | independent |
| Rear PTO RPM | 1000 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | - |
| Hitch system | - |
| Rear hitch | III/IIIN |
| Rear hitch lift | 15,650 lbs or 7098 kg |
| Front hitch | - |
| Front hitch lift | - |
Holder Cultitrac A12
General Infos| Make | Holder |
| Model | Cultitrac A12 |
| Country | Germany |
| Production | From 1956 |
| Price | - |
| Tractor type | - |
| Fuel | diesel |
| Service repair manual | Holder Cultitrac A12 Manual |
Dimensions, sizes and tires
| AG front tires | 5.50x16 |
| AG rear tires | 5.50x16 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 1500 lbs or 680 kg |
| Length | 80 inches [203 cm] |
| Width | 30 inches [76 cm] |
| Height | - |
| Wheelbase | 45 inches [114 cm] |
| Ground clearance | 9.5 inches [24 cm] |
| Turning radius | 6 feet [1.8 m] |
| Rear tread size | - |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 36.9 ci or 0.6 L |
| Cylinders | 1 cylinders |
| Engine power | 12 hp or 8.9 kW |
| Engine RPM | 2200 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | diesel |
| Fuel injection | direct injection |
| Fuel tank size | 2.5 gal or 9.5 L |
| Oil capacity | - |
| Oil change | - |
| Starter motor | - |
| Starter volts | 12 V |
| Parts And Accessories | Holder Cultitrac A12 Parts |
| Batteries number | - |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | - |
| Charging system | - |
| Charging Volts | - |
| Charging Amps | - |
| Trans system | - |
| Trans type | - |
| Trans gears | 6 forward and 3 reverse |
| Clutch system | dry disc |
| Wheel drive | 4x4 articulated 4WD |
| Final drive | - |
| Steering | - |
| Braking system | drum |
| Cabin type | Open operator station |
| Differentiel lock | - |
| System | open center |
| Valves | - |
| Pump flow | 2.6 gpm or 9.8 lpm |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | 1 gal or 3.8 L |
| Hydraulic pressure | 1850 psi or 127.6 bar |
| Max flow | - |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | - |
| Fuel consumption | - |
| Pulling power | - |
| Claimed power | - |
| Real power | - |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | independent |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | - |
| Hitch system | - |
| Rear hitch | - |
| Rear hitch lift | - |
| Front hitch | - |
| Front hitch lift | - |
Related tractor comparison
John Deere 8110T J.I. Case 900-B
Holder Cultitrac A12 J.I. Case 400
Holder Cultitrac A12 International Harvester 350
Holder Cultitrac A12 Volvo T36
Holder Cultitrac A12 David Brown 50TD
Holder Cultitrac A12 Lanz Bulldog D2416
Choose another tractor
Useful links and guides ....
- John Deere provided us with the latest version of its 8110T service repair manual
- Find All mechanical and electrical parts and accessories of John Deere 8110T farm-tractor here
- Get your Holder Cultitrac A12 manual book version
- Cabine, electrical And mechanical parts for Holder Cultitrac A12 farm-tractor here
