John Deere 6130D VS John Deere 5010 specs comparison

John Deere 6130D

General Infos

Make	John Deere
Model	6130D
Country	United states
Production	From 2008  Until 2017
Price	53,639  USD
Tractor type	Utility tractor
Fuel	diesel
Service repair manual	John Deere 6130D Manual

Dimensions, sizes and tires

AG front tires	14.9-24
AG rear tires	18.4-34
Lawn front tires	-
Lawn rear tires	-
Indus front tires	-
Indus rear tires	-
Weight	8,730 lbs or 3959 kg
Length	166 inches [421 cm]
Width	72 inches [182 cm]
Height	107.5 inches [273 cm]
Wheelbase	92.5 inches [234 cm]
Ground clearance	-
Turning radius	14.7 feet [4.5 m]
Rear tread size	59.5/63.5/67.6/71.3/75.4/79.4 inches
Front tread size	63.6 to 79.4 inches
Turning radius	-

Horsepower and engin specs

Engine capacity	276 ci or 4.5 L
Cylinders	4 cylinders 8 valves
Engine power	129.8 hp or 96.8 kW
Engine RPM	2100 (rpm)
Torque	387 lb-ft or 524.8 Nm
Torque RPM	1500 (rpm)
Fuel type	diesel
Fuel injection	Denso electronic high-pressure common rail
Fuel tank size	41.7 gal or 157.8 L
Oil capacity	13 qts or 12.3 L
Oil change	250 h
Starter motor	-
Starter volts	12 V
Parts And Accessories	John Deere 6130D Parts

Electrical and battery specs

Batteries number	1
Batteries voltage	12 V
Battries Amps	180 amps
Cold Amps	925
Ground force	negative
Charging system	alternator
Charging Volts	-
Charging Amps	70 amps

Clutch and gearbox specs

Trans system	John Deere Top Shaft Syncronized (TSS)
Trans type	partially synchronzied
Trans gears	9 forward and 3 reverse
Clutch system	dry disc

Cabine and mechanical specs

Wheel drive	4x4 MFWD 4WD
Final drive	-
Steering	hydrostatic power
Braking system	independent mechanical wet disc
Cabin type	Folding 2-post ROPS or cab with heat and A/C
Differentiel lock	-

Hydraulics specifications

System	open center
Valves	2 to 3
Pump flow	17.6 gpm or 66.6 lpm
SVC flow	-
Steering flow	6.9 gpm or 26.1 lpm
Tank capacity	15.3 gal or 57.9 L
Hydraulic pressure	2830 psi or 195.1 bar
Max flow	-

Drawbar specifications

Drawbar type	-
Claimed power	-
Drawbar horsepower	91.70 hp or 68.4 kW
Fuel consumption	6.8 gal/hour or 25.7 l/hour
Pulling power	10,426 lbs or 4729 kg

Power take-off (PTO) specs

Claimed power	105 hp or 78.3 kW
Real power	109.13 hp or 81.4 kW
Engine @RPM	540@2100 (rpm)
PTO Clutch	dry disc
Rear PTO	independent
Rear PTO RPM	540 (rpm)
Front PTO	-
Front PTO RPM	-
Mid PTO	-
Mid PTO RPM	-
Fuel consumption	6.8 gal/hour or 25.7 l/hour

3 point hitch specifiations

Hitch system	mechanical lower link
Rear hitch	II
Rear hitch lift	6,800 lbs or 3084 kg
Front hitch	-
Front hitch lift	-

John Deere 5010

General Infos

Make	John Deere
Model	5010
Country	United states
Production	From 1963  Until 1965
Price	11,000  USD
Tractor type	Standard tread tractor
Fuel	diesel
Service repair manual	John Deere 5010 Manual

Dimensions, sizes and tires

AG front tires	7.50-20
AG rear tires	18.4-34
Lawn front tires	-
Lawn rear tires	-
Indus front tires	-
Indus rear tires	-
Weight	12,270 lbs or 5565 kg
Length	172.25 inches [437 cm]
Width	95.75 inches [243 cm]
Height	-
Wheelbase	104 inches [264 cm]
Ground clearance	16 inches [40 cm]
Turning radius	15 feet [4.6 m]
Rear tread size	-
Front tread size	-
Turning radius	-

Horsepower and engin specs

Engine capacity	531 ci or 8.7 L
Cylinders	6 cylinders
Engine power	-
Engine RPM	2200 (rpm)
Torque	-
Torque RPM	-
Fuel type	diesel
Fuel injection	-
Fuel tank size	48 gal or 181.7 L
Oil capacity	12 qts or 11.4 L
Oil change	-
Starter motor	-
Starter volts	24 V
Parts And Accessories	John Deere 5010 Parts

Electrical and battery specs

Batteries number	4
Batteries voltage	6 V
Battries Amps	115 amps
Cold Amps	-
Ground force	-
Charging system	Delco-Remy or Prestolite generator
Charging Volts	-
Charging Amps	-

Clutch and gearbox specs

Trans system	Syncro-Range
Trans type	-
Trans gears	8 forward and 3 reverse
Clutch system	-

Cabine and mechanical specs

Wheel drive	4x2 2WD
Final drive	-
Steering	power
Braking system	hydraulic wet disc
Cabin type	Open operator station
Differentiel lock	-

Hydraulics specifications

System	closed center
Valves	1 or 2
Pump flow	20 gpm or 75.7 lpm
SVC flow	-
Steering flow	-
Tank capacity	17 gal or 64.3 L
Hydraulic pressure	2250 psi or 155.1 bar
Max flow	-

Drawbar specifications

Drawbar type	-
Claimed power	109 hp or 81.3 kW
Drawbar horsepower	105.92 hp or 79.0 kW
Fuel consumption	8.0 gal/hour or 30.3 l/hour
Pulling power	14174 lbs or 6429 kg

Power take-off (PTO) specs

Claimed power	121 hp or 90.2 kW
Real power	108.67 hp or 81.0 kW
Engine @RPM	-
PTO Clutch	-
Rear PTO	independent
Rear PTO RPM	1000 (rpm)
Front PTO	-
Front PTO RPM	-
Mid PTO	-
Mid PTO RPM	-
Fuel consumption	7.0 gal/hour or 26.5 l/hour

3 point hitch specifiations

Hitch system	-
Rear hitch	3/2
Rear hitch lift	-
Front hitch	-
Front hitch lift	-

Add a tractor