John Deere 6130D VS Allis Chalmers HD3 specs comparison

John Deere 6130D

General Infos

Make	John Deere
Model	6130D
Country	United states
Production	From 2008  Until 2017
Price	53,639  USD
Tractor type	Utility tractor
Fuel	diesel
Service repair manual	John Deere 6130D Manual

Dimensions, sizes and tires

AG front tires	14.9-24
AG rear tires	18.4-34
Lawn front tires	-
Lawn rear tires	-
Indus front tires	-
Indus rear tires	-
Weight	8,730 lbs or 3959 kg
Length	166 inches [421 cm]
Width	72 inches [182 cm]
Height	107.5 inches [273 cm]
Wheelbase	92.5 inches [234 cm]
Ground clearance	-
Turning radius	14.7 feet [4.5 m]
Rear tread size	59.5/63.5/67.6/71.3/75.4/79.4 inches
Front tread size	63.6 to 79.4 inches
Turning radius	-

Horsepower and engin specs

Engine capacity	276 ci or 4.5 L
Cylinders	4 cylinders 8 valves
Engine power	129.8 hp or 96.8 kW
Engine RPM	2100 (rpm)
Torque	387 lb-ft or 524.8 Nm
Torque RPM	1500 (rpm)
Fuel type	diesel
Fuel injection	Denso electronic high-pressure common rail
Fuel tank size	41.7 gal or 157.8 L
Oil capacity	13 qts or 12.3 L
Oil change	250 h
Starter motor	-
Starter volts	12 V
Parts And Accessories	John Deere 6130D Parts

Electrical and battery specs

Batteries number	1
Batteries voltage	12 V
Battries Amps	180 amps
Cold Amps	925
Ground force	negative
Charging system	alternator
Charging Volts	-
Charging Amps	70 amps

Clutch and gearbox specs

Trans system	John Deere Top Shaft Syncronized (TSS)
Trans type	partially synchronzied
Trans gears	9 forward and 3 reverse
Clutch system	dry disc

Cabine and mechanical specs

Wheel drive	4x4 MFWD 4WD
Final drive	-
Steering	hydrostatic power
Braking system	independent mechanical wet disc
Cabin type	Folding 2-post ROPS or cab with heat and A/C
Differentiel lock	-

Hydraulics specifications

System	open center
Valves	2 to 3
Pump flow	17.6 gpm or 66.6 lpm
SVC flow	-
Steering flow	6.9 gpm or 26.1 lpm
Tank capacity	15.3 gal or 57.9 L
Hydraulic pressure	2830 psi or 195.1 bar
Max flow	-

Drawbar specifications

Drawbar type	-
Claimed power	-
Drawbar horsepower	91.70 hp or 68.4 kW
Fuel consumption	6.8 gal/hour or 25.7 l/hour
Pulling power	10,426 lbs or 4729 kg

Power take-off (PTO) specs

Claimed power	105 hp or 78.3 kW
Real power	109.13 hp or 81.4 kW
Engine @RPM	540@2100 (rpm)
PTO Clutch	dry disc
Rear PTO	independent
Rear PTO RPM	540 (rpm)
Front PTO	-
Front PTO RPM	-
Mid PTO	-
Mid PTO RPM	-
Fuel consumption	6.8 gal/hour or 25.7 l/hour

3 point hitch specifiations

Hitch system	mechanical lower link
Rear hitch	II
Rear hitch lift	6,800 lbs or 3084 kg
Front hitch	-
Front hitch lift	-

Allis Chalmers HD3

General Infos

Make	Allis Chalmers
Model	HD3
Country	United states
Production	From 1960  Until 1968
Price	-
Tractor type	-
Fuel	diesel
Service repair manual	Allis Chalmers HD3 Manual

Dimensions, sizes and tires

AG front tires	7-inch track
AG rear tires	7-inch track
Lawn front tires	-
Lawn rear tires	-
Indus front tires	-
Indus rear tires	-
Weight	7645 lbs or 3467 kg
Length	108.75 inches [276 cm]
Width	-
Height	-
Wheelbase	-
Ground clearance	-
Turning radius	-
Rear tread size	48 inches
Front tread size	48 inches
Turning radius	-

Horsepower and engin specs

Engine capacity	175 ci or 2.9 L
Cylinders	4 cylinders
Engine power	-
Engine RPM	1650 (rpm)
Torque	-
Torque RPM	-
Fuel type	diesel
Fuel injection	Roosa-Master injection
Fuel tank size	14 gal or 53.0 L
Oil capacity	-
Oil change	-
Starter motor	electric
Starter volts	12 V
Parts And Accessories	Allis Chalmers HD3 Parts

Electrical and battery specs

Batteries number	2
Batteries voltage	6 V
Battries Amps	-
Cold Amps	-
Ground force	-
Charging system	-
Charging Volts	-
Charging Amps	-

Clutch and gearbox specs

Trans system	Power Director
Trans type	mechanical shuttle
Trans gears	4 forward and reverse
Clutch system	wet disc (Power Director)

Cabine and mechanical specs

Wheel drive	crawler
Final drive	-
Steering	mechanical clutches
Braking system	mechanical contracting band
Cabin type	Open operator station
Differentiel lock	-

Hydraulics specifications

System	open center
Valves	1 to 3
Pump flow	15 gpm or 56.8 lpm
SVC flow	-
Steering flow	-
Tank capacity	16.5 gal or 62.5 L
Hydraulic pressure	-
Max flow	-

Drawbar specifications

Drawbar type	-
Claimed power	-
Drawbar horsepower	26.17 hp or 19.5 kW
Fuel consumption	2.6 gal/hour or 9.8 l/hour
Pulling power	8207 lbs or 3722 kg

Power take-off (PTO) specs

Claimed power	-
Real power	32.53 hp or 24.3 kW
Engine @RPM	-
PTO Clutch	-
Rear PTO	optional
Rear PTO RPM	540 (rpm)
Front PTO	-
Front PTO RPM	-
Mid PTO	-
Mid PTO RPM	-
Fuel consumption	2.6 gal/hour or 9.8 l/hour

3 point hitch specifiations

Hitch system	-
Rear hitch	-
Rear hitch lift	-
Front hitch	-
Front hitch lift	-

Add a tractor