John Deere 6130D VS Allis Chalmers 8550 specs comparison

John Deere 6130D

General Infos

Make	John Deere
Model	6130D
Country	United states
Production	From 2008  Until 2017
Price	53,639  USD
Tractor type	Utility tractor
Fuel	diesel
Service repair manual	John Deere 6130D Manual

Dimensions, sizes and tires

AG front tires	14.9-24
AG rear tires	18.4-34
Lawn front tires	-
Lawn rear tires	-
Indus front tires	-
Indus rear tires	-
Weight	8,730 lbs or 3959 kg
Length	166 inches [421 cm]
Width	72 inches [182 cm]
Height	107.5 inches [273 cm]
Wheelbase	92.5 inches [234 cm]
Ground clearance	-
Turning radius	14.7 feet [4.5 m]
Rear tread size	59.5/63.5/67.6/71.3/75.4/79.4 inches
Front tread size	63.6 to 79.4 inches
Turning radius	-

Horsepower and engin specs

Engine capacity	276 ci or 4.5 L
Cylinders	4 cylinders 8 valves
Engine power	129.8 hp or 96.8 kW
Engine RPM	2100 (rpm)
Torque	387 lb-ft or 524.8 Nm
Torque RPM	1500 (rpm)
Fuel type	diesel
Fuel injection	Denso electronic high-pressure common rail
Fuel tank size	41.7 gal or 157.8 L
Oil capacity	13 qts or 12.3 L
Oil change	250 h
Starter motor	-
Starter volts	12 V
Parts And Accessories	John Deere 6130D Parts

Electrical and battery specs

Batteries number	1
Batteries voltage	12 V
Battries Amps	180 amps
Cold Amps	925
Ground force	negative
Charging system	alternator
Charging Volts	-
Charging Amps	70 amps

Clutch and gearbox specs

Trans system	John Deere Top Shaft Syncronized (TSS)
Trans type	partially synchronzied
Trans gears	9 forward and 3 reverse
Clutch system	dry disc

Cabine and mechanical specs

Wheel drive	4x4 MFWD 4WD
Final drive	-
Steering	hydrostatic power
Braking system	independent mechanical wet disc
Cabin type	Folding 2-post ROPS or cab with heat and A/C
Differentiel lock	-

Hydraulics specifications

System	open center
Valves	2 to 3
Pump flow	17.6 gpm or 66.6 lpm
SVC flow	-
Steering flow	6.9 gpm or 26.1 lpm
Tank capacity	15.3 gal or 57.9 L
Hydraulic pressure	2830 psi or 195.1 bar
Max flow	-

Drawbar specifications

Drawbar type	-
Claimed power	-
Drawbar horsepower	91.70 hp or 68.4 kW
Fuel consumption	6.8 gal/hour or 25.7 l/hour
Pulling power	10,426 lbs or 4729 kg

Power take-off (PTO) specs

Claimed power	105 hp or 78.3 kW
Real power	109.13 hp or 81.4 kW
Engine @RPM	540@2100 (rpm)
PTO Clutch	dry disc
Rear PTO	independent
Rear PTO RPM	540 (rpm)
Front PTO	-
Front PTO RPM	-
Mid PTO	-
Mid PTO RPM	-
Fuel consumption	6.8 gal/hour or 25.7 l/hour

3 point hitch specifiations

Hitch system	mechanical lower link
Rear hitch	II
Rear hitch lift	6,800 lbs or 3084 kg
Front hitch	-
Front hitch lift	-

Allis Chalmers 8550

General Infos

Make	Allis Chalmers
Model	8550
Country	United states
Production	From 1978  Until 1981
Price	86,753  USD
Tractor type	Four wheel Drive (4WD) tractor
Fuel	diesel
Service repair manual	Allis Chalmers 8550 Manual

Dimensions, sizes and tires

AG front tires	20.8x34
AG rear tires	20.8x34
Lawn front tires	-
Lawn rear tires	-
Indus front tires	-
Indus rear tires	-
Weight	26,400 lbs or 11975 kg
Length	285 inches [723 cm]
Width	95.5 inches [242 cm]
Height	139 inches [353 cm]
Wheelbase	126 inches [320 cm]
Ground clearance	17 inches [43 cm]
Turning radius	-
Rear tread size	62 to 123 inches
Front tread size	62 to 123 inches
Turning radius	-

Horsepower and engin specs

Engine capacity	731 ci or 12.0 L
Cylinders	6 cylinders 24 valves
Engine power	300 hp or 223.7 kW
Engine RPM	2500 (rpm)
Torque	-
Torque RPM	-
Fuel type	diesel
Fuel injection	-
Fuel tank size	170 gal or 643.5 L
Oil capacity	46 qts or 43.5 L
Oil change	-
Starter motor	-
Starter volts	12 V
Parts And Accessories	Allis Chalmers 8550 Parts

Electrical and battery specs

Batteries number	4
Batteries voltage	12 V
Battries Amps	-
Cold Amps	-
Ground force	negative
Charging system	alternator
Charging Volts	-
Charging Amps	-

Clutch and gearbox specs

Trans system	Power Director
Trans type	partial power shift
Trans gears	20 forward and 4 reverse
Clutch system	-

Cabine and mechanical specs

Wheel drive	4x4 articulated 4WD
Final drive	-
Steering	hydrostatic power
Braking system	hydraulic wet discs
Cabin type	Acousta Cab II standard with heat and air-conditioning
Differentiel lock	-

Hydraulics specifications

System	closed center
Valves	3 or 4
Pump flow	74.9 gpm or 283.5 lpm
SVC flow	-
Steering flow	-
Tank capacity	-
Hydraulic pressure	-
Max flow	-

Drawbar specifications

Drawbar type	-
Claimed power	210 hp or 156.6 kW
Drawbar horsepower	217.92 hp or 162.5 kW
Fuel consumption	17.5 gal/hour or 66.2 l/hour
Pulling power	26,220 lbs or 11893 kg

Power take-off (PTO) specs

Claimed power	250 hp or 186.4 kW
Real power	253.88 hp or 189.3 kW
Engine @RPM	-
PTO Clutch	-
Rear PTO	independent
Rear PTO RPM	1000 (rpm)
Front PTO	-
Front PTO RPM	-
Mid PTO	-
Mid PTO RPM	-
Fuel consumption	17.4 gal/hour or 65.9 l/hour

3 point hitch specifiations

Hitch system	-
Rear hitch	IV/III
Rear hitch lift	-
Front hitch	-
Front hitch lift	-

Add a tractor