John Deere 6130D VS Allis Chalmers 440 specs comparison

John Deere 6130D

General Infos

Make	John Deere
Model	6130D
Country	United states
Production	From 2008  Until 2017
Price	53,639  USD
Tractor type	Utility tractor
Fuel	diesel
Service repair manual	John Deere 6130D Manual

Dimensions, sizes and tires

AG front tires	14.9-24
AG rear tires	18.4-34
Lawn front tires	-
Lawn rear tires	-
Indus front tires	-
Indus rear tires	-
Weight	8,730 lbs or 3959 kg
Length	166 inches [421 cm]
Width	72 inches [182 cm]
Height	107.5 inches [273 cm]
Wheelbase	92.5 inches [234 cm]
Ground clearance	-
Turning radius	14.7 feet [4.5 m]
Rear tread size	59.5/63.5/67.6/71.3/75.4/79.4 inches
Front tread size	63.6 to 79.4 inches
Turning radius	-

Horsepower and engin specs

Engine capacity	276 ci or 4.5 L
Cylinders	4 cylinders 8 valves
Engine power	129.8 hp or 96.8 kW
Engine RPM	2100 (rpm)
Torque	387 lb-ft or 524.8 Nm
Torque RPM	1500 (rpm)
Fuel type	diesel
Fuel injection	Denso electronic high-pressure common rail
Fuel tank size	41.7 gal or 157.8 L
Oil capacity	13 qts or 12.3 L
Oil change	250 h
Starter motor	-
Starter volts	12 V
Parts And Accessories	John Deere 6130D Parts

Electrical and battery specs

Batteries number	1
Batteries voltage	12 V
Battries Amps	180 amps
Cold Amps	925
Ground force	negative
Charging system	alternator
Charging Volts	-
Charging Amps	70 amps

Clutch and gearbox specs

Trans system	John Deere Top Shaft Syncronized (TSS)
Trans type	partially synchronzied
Trans gears	9 forward and 3 reverse
Clutch system	dry disc

Cabine and mechanical specs

Wheel drive	4x4 MFWD 4WD
Final drive	-
Steering	hydrostatic power
Braking system	independent mechanical wet disc
Cabin type	Folding 2-post ROPS or cab with heat and A/C
Differentiel lock	-

Hydraulics specifications

System	open center
Valves	2 to 3
Pump flow	17.6 gpm or 66.6 lpm
SVC flow	-
Steering flow	6.9 gpm or 26.1 lpm
Tank capacity	15.3 gal or 57.9 L
Hydraulic pressure	2830 psi or 195.1 bar
Max flow	-

Drawbar specifications

Drawbar type	-
Claimed power	-
Drawbar horsepower	91.70 hp or 68.4 kW
Fuel consumption	6.8 gal/hour or 25.7 l/hour
Pulling power	10,426 lbs or 4729 kg

Power take-off (PTO) specs

Claimed power	105 hp or 78.3 kW
Real power	109.13 hp or 81.4 kW
Engine @RPM	540@2100 (rpm)
PTO Clutch	dry disc
Rear PTO	independent
Rear PTO RPM	540 (rpm)
Front PTO	-
Front PTO RPM	-
Mid PTO	-
Mid PTO RPM	-
Fuel consumption	6.8 gal/hour or 25.7 l/hour

3 point hitch specifiations

Hitch system	mechanical lower link
Rear hitch	II
Rear hitch lift	6,800 lbs or 3084 kg
Front hitch	-
Front hitch lift	-

Allis Chalmers 440

General Infos

Make	Allis Chalmers
Model	440
Country	United states
Production	From 1973  Until 1977
Price	38,179  USD
Tractor type	Four wheel Drive (4WD) tractor
Fuel	diesel
Service repair manual	Allis Chalmers 440 Manual

Dimensions, sizes and tires

AG front tires	23.1-26
AG rear tires	23.1-26
Lawn front tires	-
Lawn rear tires	-
Indus front tires	-
Indus rear tires	-
Weight	20,230 lbs or 9176 kg
Length	228 inches [579 cm]
Width	105 inches [266 cm]
Height	139 inches [353 cm]
Wheelbase	-
Ground clearance	-
Turning radius	-
Rear tread size	-
Front tread size	-
Turning radius	-

Horsepower and engin specs

Engine capacity	555 ci or 9.1 L
Cylinders	8 cylinders 32 valves
Engine power	218 hp or 162.6 kW
Engine RPM	2800 (rpm)
Torque	-
Torque RPM	-
Fuel type	diesel
Fuel injection	-
Fuel tank size	-
Oil capacity	-
Oil change	-
Starter motor	-
Starter volts	-
Parts And Accessories	Allis Chalmers 440 Parts

Electrical and battery specs

Batteries number	-
Batteries voltage	-
Battries Amps	-
Cold Amps	-
Ground force	-
Charging system	-
Charging Volts	-
Charging Amps	-

Clutch and gearbox specs

Trans system	Eaton
Trans type	-
Trans gears	10 forward and 2 reverse
Clutch system	cerametallic dry disc

Cabine and mechanical specs

Wheel drive	4x4 articulated 4WD
Final drive	outboard planetary
Steering	articulated hydraulic power
Braking system	hydraulic disc
Cabin type	Cab standard
Differentiel lock	-

Hydraulics specifications

System	open center
Valves	3
Pump flow	21 gpm or 79.5 lpm
SVC flow	-
Steering flow	16 gpm or 60.6 lpm
Tank capacity	-
Hydraulic pressure	2000 psi or 137.9 bar
Max flow	-

Drawbar specifications

Drawbar type	-
Claimed power	165 hp or 123.0 kW
Drawbar horsepower	-
Fuel consumption	-
Pulling power	-

Power take-off (PTO) specs

Claimed power	-
Real power	-
Engine @RPM	-
PTO Clutch	-
Rear PTO	-
Rear PTO RPM	-
Front PTO	-
Front PTO RPM	-
Mid PTO	-
Mid PTO RPM	-
Fuel consumption	-

3 point hitch specifiations

Hitch system	-
Rear hitch	III/IV
Rear hitch lift	-
Front hitch	-
Front hitch lift	-

Add a tractor