John Deere 6115D VS AGCO DT240A specs comparison

John Deere 6115D

General Infos

Make	John Deere
Model	6115D
Country	United states
Production	From 2008  Until 2017
Price	48,483  USD
Tractor type	Utility tractor
Fuel	diesel
Service repair manual	John Deere 6115D Manual

Dimensions, sizes and tires

AG front tires	10.00-16
AG rear tires	18.4-3
Lawn front tires	-
Lawn rear tires	-
Indus front tires	-
Indus rear tires	-
Weight	7,495 lbs or 3399 kg
Length	166 inches [421 cm]
Width	72 inches [182 cm]
Height	107.5 inches [273 cm]
Wheelbase	92.5 inches [234 cm]
Ground clearance	-
Turning radius	14.7 feet [4.5 m]
Rear tread size	59.5/63.5/67.6/71.3/75.4/79.4 inches
Front tread size	60.4 to 80.4 inches
Turning radius	-

Horsepower and engin specs

Engine capacity	276 ci or 4.5 L
Cylinders	4 cylinders 8 valves
Engine power	118.4 hp or 88.3 kW
Engine RPM	2100 (rpm)
Torque	355 lb-ft or 481.4 Nm
Torque RPM	1500 (rpm)
Fuel type	diesel
Fuel injection	Denso electronic high-pressure common rail
Fuel tank size	41.7 gal or 157.8 L
Oil capacity	13 qts or 12.3 L
Oil change	250 h
Starter motor	-
Starter volts	12 V
Parts And Accessories	John Deere 6115D Parts

Electrical and battery specs

Batteries number	1
Batteries voltage	12 V
Battries Amps	180 amps
Cold Amps	925
Ground force	negative
Charging system	alternator
Charging Volts	-
Charging Amps	70 amps

Clutch and gearbox specs

Trans system	John Deere Top Shaft Syncronized (TSS)
Trans type	partially synchronzied
Trans gears	9 forward and 3 reverse
Clutch system	dry disc

Cabine and mechanical specs

Wheel drive	4x2 2WD
Final drive	-
Steering	hydrostatic power
Braking system	independent mechanical wet disc
Cabin type	Folding 2-post ROPS or cab with heat and A/C
Differentiel lock	-

Hydraulics specifications

System	open center
Valves	2 to 3
Pump flow	17.6 gpm or 66.6 lpm
SVC flow	-
Steering flow	6.9 gpm or 26.1 lpm
Tank capacity	15.3 gal or 57.9 L
Hydraulic pressure	2830 psi or 195.1 bar
Max flow	-

Drawbar specifications

Drawbar type	-
Claimed power	-
Drawbar horsepower	80.89 hp or 60.3 kW
Fuel consumption	6.3 gal/hour or 23.8 l/hour
Pulling power	9,856 lbs or 4470 kg

Power take-off (PTO) specs

Claimed power	95 hp or 70.8 kW
Real power	99.37 hp or 74.1 kW
Engine @RPM	540@2100 (rpm)
PTO Clutch	dry disc
Rear PTO	independent
Rear PTO RPM	540 (rpm)
Front PTO	-
Front PTO RPM	-
Mid PTO	-
Mid PTO RPM	-
Fuel consumption	6.3 gal/hour or 23.8 l/hour

3 point hitch specifiations

Hitch system	mechanical lower link
Rear hitch	II
Rear hitch lift	6,800 lbs or 3084 kg
Front hitch	-
Front hitch lift	-

AGCO DT240A

General Infos

Make	AGCO
Model	DT240A
Country	United states
Production	From 2005  Until 2008
Price	-
Tractor type	Row Crop tractor
Fuel	diesel
Service repair manual	AGCO DT240A Manual

Dimensions, sizes and tires

AG front tires	-
AG rear tires	-
Lawn front tires	-
Lawn rear tires	-
Indus front tires	-
Indus rear tires	-
Weight	19,951 lbs or 9049 kg
Length	206 inches [523 cm]
Width	-
Height	122 inches [309 cm]
Wheelbase	121 inches [307 cm]
Ground clearance	-
Turning radius	-
Rear tread size	-
Front tread size	-
Turning radius	-

Horsepower and engin specs

Engine capacity	513 ci or 8.4 L
Cylinders	6 cylinders
Engine power	290 hp or 216.3 kW
Engine RPM	2200 (rpm)
Torque	-
Torque RPM	-
Fuel type	diesel
Fuel injection	-
Fuel tank size	158.5 gal or 599.9 L
Oil capacity	-
Oil change	-
Starter motor	-
Starter volts	12 V
Parts And Accessories	AGCO DT240A Parts

Electrical and battery specs

Batteries number	-
Batteries voltage	12 V
Battries Amps	-
Cold Amps	-
Ground force	negative
Charging system	-
Charging Volts	-
Charging Amps	-

Clutch and gearbox specs

Trans system	PowerMaxx CVT
Trans type	continuously variable transmission
Trans gears	infinite (two-range) forward and reverse
Clutch system	-

Cabine and mechanical specs

Wheel drive	4x4 MFWD 4WD
Final drive	-
Steering	hydrostatic power
Braking system	hydraulic wet disc
Cabin type	Cab standard with optional pneumatic suspension
Differentiel lock	-

Hydraulics specifications

System	closed center pressure flow compensated
Valves	4 or 5
Pump flow	-
SVC flow	-
Steering flow	-
Tank capacity	-
Hydraulic pressure	2900 psi or 200.0 bar
Max flow	39 gpm or 147.6 lpm

Drawbar specifications

Drawbar type	-
Claimed power	-
Drawbar horsepower	210.9 hp or 157.3 kW
Fuel consumption	15.5 gal/hour or 58.7 l/hour
Pulling power	28,755 lbs or 13043 kg

Power take-off (PTO) specs

Claimed power	240 hp or 179.0 kW
Real power	265.5 hp or 198.0 kW
Engine @RPM	-
PTO Clutch	-
Rear PTO	independent
Rear PTO RPM	540 (rpm)
Front PTO	-
Front PTO RPM	-
Mid PTO	-
Mid PTO RPM	-
Fuel consumption	16.5 gal/hour or 62.5 l/hour

3 point hitch specifiations

Hitch system	-
Rear hitch	3
Rear hitch lift	14,400 lbs or 6531 kg
Front hitch	-
Front hitch lift	-

Add a tractor