John Deere 2950 VS Farmall 100 specs comparison

John Deere 2950

General Infos

Make	John Deere
Model	2950
Country	United states
Production	From 1983  Until 1988
Price	30,000  USD
Tractor type	Utility tractor
Fuel	diesel
Service repair manual	John Deere 2950 Manual

Dimensions, sizes and tires

AG front tires	10.00-16:18.4-34 (2WD)
AG rear tires	-
Lawn front tires	-
Lawn rear tires	-
Indus front tires	-
Indus rear tires	-
Weight	10,100 lbs or 4581 kg
Length	153.2 inches [389 cm]
Width	-
Height	108.3 inches [275 cm]
Wheelbase	101.6 inches [258 cm]
Ground clearance	-
Turning radius	15.7 feet [4.8 m]
Rear tread size	-
Front tread size	-
Turning radius	-

Horsepower and engin specs

Engine capacity	359 ci or 5.9 L
Cylinders	6 cylinders
Engine power	-
Engine RPM	2500 (rpm)
Torque	-
Torque RPM	-
Fuel type	diesel
Fuel injection	-
Fuel tank size	32.3 gal or 122.3 L
Oil capacity	-
Oil change	-
Starter motor	-
Starter volts	12 V
Parts And Accessories	John Deere 2950 Parts

Electrical and battery specs

Batteries number	1
Batteries voltage	12 V
Battries Amps	-
Cold Amps	-
Ground force	negative
Charging system	alternator
Charging Volts	-
Charging Amps	55 amps

Clutch and gearbox specs

Trans system	John Deere TSS Creeper
Trans type	partially synchronized
Trans gears	12 forward and 8 reverse
Clutch system	-

Cabine and mechanical specs

Wheel drive	4x2 2WD
Final drive	-
Steering	power
Braking system	differential hydraulic wet disc
Cabin type	Two-post ROPS
Differentiel lock	rear standard

Hydraulics specifications

System	closed center
Valves	2
Pump flow	23 gpm or 87.1 lpm
SVC flow	-
Steering flow	-
Tank capacity	-
Hydraulic pressure	-
Max flow	-

Drawbar specifications

Drawbar type	-
Claimed power	-
Drawbar horsepower	72.12 hp or 53.8 kW
Fuel consumption	5.3 gal/hour or 20.1 l/hour
Pulling power	8,768 lbs or 3977 kg

Power take-off (PTO) specs

Claimed power	85 hp or 63.4 kW
Real power	85.50 hp or 63.8 kW
Engine @RPM	-
PTO Clutch	-
Rear PTO	independent
Rear PTO RPM	540 (rpm)
Front PTO	-
Front PTO RPM	-
Mid PTO	-
Mid PTO RPM	-
Fuel consumption	5.2 gal/hour or 19.7 l/hour

3 point hitch specifiations

Hitch system	load and depth control
Rear hitch	II
Rear hitch lift	4,868 lbs or 2208 kg
Front hitch	-
Front hitch lift	-

Farmall 100

General Infos

Make	Farmall
Model	100
Country	United states
Production	From 1954  Until 1956
Price	-
Tractor type	Row Crop tractor
Fuel	gasoline
Service repair manual	Farmall 100 Manual

Dimensions, sizes and tires

AG front tires	-
AG rear tires	-
Lawn front tires	-
Lawn rear tires	-
Indus front tires	-
Indus rear tires	-
Weight	2,600 lbs or 1179 kg
Length	107 inches [271 cm]
Width	-
Height	-
Wheelbase	71 inches [180 cm]
Ground clearance	-
Turning radius	-
Rear tread size	-
Front tread size	-
Turning radius	-

Horsepower and engin specs

Engine capacity	122.7 ci or 2.0 L
Cylinders	4 cylinders
Engine power	-
Engine RPM	1400 (rpm)
Torque	-
Torque RPM	-
Fuel type	gasoline
Fuel injection	-
Fuel tank size	-
Oil capacity	5 qts or 4.7 L
Oil change	-
Starter motor	-
Starter volts	6 V
Parts And Accessories	Farmall 100 Parts

Electrical and battery specs

Batteries number	1
Batteries voltage	6 V
Battries Amps	-
Cold Amps	-
Ground force	-
Charging system	-
Charging Volts	-
Charging Amps	-

Clutch and gearbox specs

Trans system	-
Trans type	gear
Trans gears	4 forward and 1 reverse
Clutch system	-

Cabine and mechanical specs

Wheel drive	4x2 2WD
Final drive	-
Steering	manual
Braking system	contracting band
Cabin type	Open operator station
Differentiel lock	-

Hydraulics specifications

System	-
Valves	-
Pump flow	-
SVC flow	-
Steering flow	-
Tank capacity	-
Hydraulic pressure	-
Max flow	-

Drawbar specifications

Drawbar type	-
Claimed power	-
Drawbar horsepower	17.83 hp or 13.3 kW
Fuel consumption	-
Pulling power	2,503 lbs or 1135 kg

Power take-off (PTO) specs

Claimed power	-
Real power	-
Engine @RPM	-
PTO Clutch	-
Rear PTO	-
Rear PTO RPM	-
Front PTO	-
Front PTO RPM	-
Mid PTO	-
Mid PTO RPM	-
Fuel consumption	-

3 point hitch specifiations

Hitch system	-
Rear hitch	-
Rear hitch lift	-
Front hitch	-
Front hitch lift	-

Add a tractor