J.I. Case W-3 VS International Harvester 250A specs comparison
J.I. Case W-3
General Infos| Make | J.I. Case |
| Model | W-3 |
| Country | Unites states |
| Production | From 1960 Until 1963 |
| Price | - |
| Tractor type | Industrial tractor |
| Fuel | gasoline |
| Service repair manual | J.I. Case W-3 Manual |
Dimensions, sizes and tires
| AG front tires | - |
| AG rear tires | - |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | 7.50-16 |
| Indus rear tires | 14.9-24 |
| Weight | 3716 lbs or 1685 kg |
| Length | 126 inches [320 cm] (tractor) |
| Width | 63.5 inches [161 cm] (tractor) |
| Height | 64.5 inches [163 cm] |
| Wheelbase | 75.5 inches [191 cm] |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | 58/66 inches |
| Front tread size | 53 inches |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 188 ci or 3.1 L |
| Cylinders | 4 cylinders |
| Engine power | 52 hp or 38.8 kW |
| Engine RPM | 2100 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | gasoline |
| Fuel injection | carburetor |
| Fuel tank size | 22 gal or 83.3 L |
| Oil capacity | 5 qts or 4.7 L |
| Oil change | 100 h |
| Starter motor | electric |
| Starter volts | 12 V |
| Parts And Accessories | J.I. Case W-3 Parts |
| Batteries number | - |
| Batteries voltage | 12 V |
| Battries Amps | 50 amps |
| Cold Amps | - |
| Ground force | positive |
| Charging system | generator |
| Charging Volts | - |
| Charging Amps | - |
| Trans system | - |
| Trans type | torque converter |
| Trans gears | 8 forward and reverse |
| Clutch system | - |
| Wheel drive | 4x2 2WD |
| Final drive | - |
| Steering | power |
| Braking system | disc |
| Cabin type | Open operator station |
| Differentiel lock | - |
| System | - |
| Valves | - |
| Pump flow | 20 gpm or 75.7 lpm |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | 4 gal or 15.1 L |
| Hydraulic pressure | 2000 psi or 137.9 bar |
| Max flow | - |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | - |
| Fuel consumption | - |
| Pulling power | - |
| Claimed power | - |
| Real power | - |
| Engine @RPM | 541@1970 (rpm) |
| PTO Clutch | - |
| Rear PTO | independent |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | - |
| Hitch system | - |
| Rear hitch | - |
| Rear hitch lift | - |
| Front hitch | - |
| Front hitch lift | - |
International Harvester 250A
General Infos| Make | International Harvester |
| Model | 250A |
| Country | United states |
| Production | From 1978 Until 1982 |
| Price | - |
| Tractor type | Industrial tractor |
| Fuel | diesel |
| Service repair manual | International Harvester 250A Manual |
Dimensions, sizes and tires
| AG front tires | - |
| AG rear tires | - |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | 7.50x16 |
| Indus rear tires | 14.9x24 |
| Weight | 5050 lbs or 2290 kg |
| Length | 138 inches [350 cm] |
| Width | 79 inches [200 cm] |
| Height | 89.5 inches [227 cm] |
| Wheelbase | 84 inches [213 cm] |
| Ground clearance | 9 inches [22 cm] |
| Turning radius | 11 feet [3.4 m] |
| Rear tread size | - |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 239 ci or 3.9 L |
| Cylinders | 4 cylinders |
| Engine power | 60 hp or 44.7 kW |
| Engine RPM | - |
| Torque | - | Torque RPM | - |
| Fuel type | diesel |
| Fuel injection | - |
| Fuel tank size | 20 gal or 75.7 L |
| Oil capacity | 10 qts or 9.5 L |
| Oil change | - |
| Starter motor | - |
| Starter volts | - |
| Parts And Accessories | International Harvester 250A Parts |
| Batteries number | - |
| Batteries voltage | - |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | - |
| Charging system | - |
| Charging Volts | - |
| Charging Amps | - |
| Trans system | hydrostatic |
| Trans type | - |
| Trans gears | infinite (2-range) forward and reverse |
| Clutch system | 279mm dry disc |
| Wheel drive | 4x2 2WD |
| Final drive | - |
| Steering | power |
| Braking system | independent hydraulic wet disc |
| Cabin type | Two-post fixed ROPS |
| Differentiel lock | - |
| System | open center |
| Valves | - |
| Pump flow | 13.3 gpm or 50.3 lpm |
| SVC flow | - |
| Steering flow | 2.5 gpm or 9.5 lpm |
| Tank capacity | 14 gal or 53.0 L |
| Hydraulic pressure | 2500 psi or 172.4 bar |
| Max flow | 15.8 gpm or 59.8 lpm |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | - |
| Fuel consumption | - |
| Pulling power | - |
| Claimed power | - |
| Real power | - |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | independent |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | - |
| Hitch system | - |
| Rear hitch | II/I |
| Rear hitch lift | - |
| Front hitch | - |
| Front hitch lift | - |
Related tractor comparison
J.I. Case W-3 International Harvester 238
J.I. Case W-3 International Harvester 240A
International Harvester 250A J.I. Case 648
J.I. Case W-3 Ford 445
International Harvester 250A J.I. Case 480C
J.I. Case W-3 International Harvester 165
Choose another tractor
Useful links and guides ....
- J.I. Case provided us with the latest version of its W-3 service repair manual
- Find All mechanical and electrical parts and accessories of J.I. Case W-3 industrial-tractor here
- Get your International Harvester 250A manual book version
- Cabine, electrical And mechanical parts for International Harvester 250A industrial-tractor here
