J.I. Case 400 VS New Holland Workmaster 75 specs comparison
J.I. Case 400
General Infos| Make | J.I. Case |
| Model | 400 |
| Country | Unites states |
| Production | From 1955 Until 1957 |
| Price | 4,400 USD |
| Tractor type | Standard tread tractor |
| Fuel | diesel |
| Service repair manual | J.I. Case 400 Manual |
Dimensions, sizes and tires
| AG front tires | 7.50-16 |
| AG rear tires | 14-30 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 6,000 lbs or 2721 kg |
| Length | 133 inches [337 cm] |
| Width | 66.6 inches [169 cm] |
| Height | - |
| Wheelbase | 82 inches [208 cm] |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | 52 to 64 inches |
| Front tread size | 52 to 58 inches |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 251 ci or 4.1 L |
| Cylinders | 4 cylinders 8 valves |
| Engine power | - |
| Engine RPM | 1500 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | diesel |
| Fuel injection | - |
| Fuel tank size | 21 gal or 79.5 L |
| Oil capacity | 9 qts or 8.5 L |
| Oil change | 120 h |
| Starter motor | - |
| Starter volts | 12 V |
| Parts And Accessories | J.I. Case 400 Parts |
| Batteries number | 2 |
| Batteries voltage | 6 V |
| Battries Amps | 150 amps |
| Cold Amps | - |
| Ground force | negative |
| Charging system | generator |
| Charging Volts | 12 V |
| Charging Amps | - |
| Trans system | Powr-range |
| Trans type | - |
| Trans gears | 8 forward and 2 reverse |
| Clutch system | - |
| Wheel drive | 4x2 2WD |
| Final drive | - |
| Steering | manual |
| Braking system | mechanical dry discs |
| Cabin type | Open operator station |
| Differentiel lock | - |
| System | - |
| Valves | 2 |
| Pump flow | - |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | 2.25 gal or 8.5 L |
| Hydraulic pressure | 600 psi or 41.4 bar |
| Max flow | 12 gpm or 45.4 lpm |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | - |
| Fuel consumption | - |
| Pulling power | - |
| Claimed power | - |
| Real power | - |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | independent |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | - |
| Hitch system | - |
| Rear hitch | - |
| Rear hitch lift | - |
| Front hitch | - |
| Front hitch lift | - |
New Holland Workmaster 75
General Infos| Make | New Holland |
| Model | Workmaster 75 |
| Country | United states |
| Production | From 2010 Until 2014 |
| Price | - |
| Tractor type | Utility tractor |
| Fuel | diesel |
| Service repair manual | New Holland Workmaster 75 Manual |
Dimensions, sizes and tires
| AG front tires | 11.2x24 |
| AG rear tires | 16.9x30 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 5,059 lbs or 2294 kg |
| Length | 137.2 inches [348 cm] |
| Width | 78.4 inches [199 cm] |
| Height | 95.3 inches [242 cm] |
| Wheelbase | - |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | 59.7 to 80.2 inches |
| Front tread size | 59.6 to 79.6 inches |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 195 ci or 3.2 L |
| Cylinders | 4 cylinders |
| Engine power | 75 hp or 55.9 kW |
| Engine RPM | 2500 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | diesel |
| Fuel injection | - |
| Fuel tank size | 16 gal or 60.6 L |
| Oil capacity | - |
| Oil change | - |
| Starter motor | electric |
| Starter volts | 12 V |
| Parts And Accessories | New Holland Workmaster 75 Parts |
| Batteries number | - |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | 800 |
| Ground force | negative |
| Charging system | alternator |
| Charging Volts | 12 V |
| Charging Amps | 65 amps |
| Trans system | - |
| Trans type | partially synchronized |
| Trans gears | 8 forward and 2 reverse |
| Clutch system | 11-inch dry organic plate |
| Wheel drive | 4x4 MFWD 4WD |
| Final drive | - |
| Steering | hydrostatic power |
| Braking system | differential mechanical wet disc |
| Cabin type | Two-post foldable ROPS |
| Differentiel lock | mechanical rear lock engaged by foot pedal |
| System | open center fixed displacement |
| Valves | 1 or 2 |
| Pump flow | 10.4 gpm or 39.4 lpm |
| SVC flow | - |
| Steering flow | 8.3 gpm or 31.4 lpm |
| Tank capacity | - |
| Hydraulic pressure | - |
| Max flow | 18.7 gpm or 70.8 lpm |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | - |
| Fuel consumption | - |
| Pulling power | - |
| Claimed power | 65 hp or 48.5 kW |
| Real power | 66.69 hp or 49.7 kW |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | independent |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | 4.0 gal/hour or 15.1 l/hour |
| Hitch system | position control and mechanical draft sensing |
| Rear hitch | 2/1 |
| Rear hitch lift | 3,276 lbs or 1485 kg |
| Front hitch | - |
| Front hitch lift | - |
Related tractor comparison
J.I. Case 400 New Holland T4.65
J.I. Case 400 Versatile 220
New Holland Workmaster 75 Lamborghini Rekord 65
J.I. Case 400 Kubota M6040
J.I. Case 400 Chery RC900
New Holland Workmaster 75 SAME Tiger 75
Choose another tractor
Useful links and guides ....
- J.I. Case provided us with the latest version of its 400 service repair manual
- Find All mechanical and electrical parts and accessories of J.I. Case 400 farm-tractor here
- Get your New Holland Workmaster 75 manual book version
- Cabine, electrical And mechanical parts for New Holland Workmaster 75 farm-tractor here
