Iseki SX75 VS Allis Chalmers HD3 specs comparison
Iseki SX75
General Infos| Make | Iseki |
| Model | SX75 |
| Country | Japan |
| Production | From 1985 Until 1990 |
| Price | - |
| Tractor type | Utility tractor |
| Fuel | diesel |
| Service repair manual | Iseki SX75 Manual |
Dimensions, sizes and tires
| AG front tires | 10.00-16 |
| AG rear tires | 18.4-30 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 6856 lbs or 3109 kg |
| Length | 152.8 inches [388 cm] |
| Width | - |
| Height | - |
| Wheelbase | 88.8 inches [225 cm] |
| Ground clearance | 15.2 inches [38 cm] |
| Turning radius | - |
| Rear tread size | 55.5 to 79.1 inches |
| Front tread size | 55.9 to 72.7 inches |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 235.3 ci or 3.9 L |
| Cylinders | 4 cylinders |
| Engine power | 70 hp or 52.2 kW |
| Engine RPM | 2200 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | diesel |
| Fuel injection | direct injection |
| Fuel tank size | 22.5 gal or 85.2 L |
| Oil capacity | - |
| Oil change | - |
| Starter motor | electric |
| Starter volts | 12 V |
| Parts And Accessories | Iseki SX75 Parts |
| Batteries number | - |
| Batteries voltage | 12 V |
| Battries Amps | 110 amps |
| Cold Amps | - |
| Ground force | negative |
| Charging system | - |
| Charging Volts | - |
| Charging Amps | - |
| Trans system | Super Shift |
| Trans type | syncromesh |
| Trans gears | 24 forward and 8 reverse |
| Clutch system | 330.2mm dry disc |
| Wheel drive | 4x2 2WD |
| Final drive | - |
| Steering | power |
| Braking system | wet disc |
| Cabin type | Four-post ROPS |
| Differentiel lock | - |
| System | - |
| Valves | - |
| Pump flow | 13.2 gpm or 50.0 lpm |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | - |
| Hydraulic pressure | - |
| Max flow | - |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | - |
| Fuel consumption | - |
| Pulling power | - |
| Claimed power | - |
| Real power | - |
| Engine @RPM | 540@1789 (rpm) |
| PTO Clutch | hydraulic wet disc |
| Rear PTO | independent |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | - |
| Hitch system | position and draft control |
| Rear hitch | II |
| Rear hitch lift | 6834 lbs or 3099 kg |
| Front hitch | - |
| Front hitch lift | - |
Allis Chalmers HD3
General Infos| Make | Allis Chalmers |
| Model | HD3 |
| Country | United states |
| Production | From 1960 Until 1968 |
| Price | - |
| Tractor type | - |
| Fuel | diesel |
| Service repair manual | Allis Chalmers HD3 Manual |
Dimensions, sizes and tires
| AG front tires | 7-inch track |
| AG rear tires | 7-inch track |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 7645 lbs or 3467 kg |
| Length | 108.75 inches [276 cm] |
| Width | - |
| Height | - |
| Wheelbase | - |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | 48 inches |
| Front tread size | 48 inches |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 175 ci or 2.9 L |
| Cylinders | 4 cylinders |
| Engine power | - |
| Engine RPM | 1650 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | diesel |
| Fuel injection | Roosa-Master injection |
| Fuel tank size | 14 gal or 53.0 L |
| Oil capacity | - |
| Oil change | - |
| Starter motor | electric |
| Starter volts | 12 V |
| Parts And Accessories | Allis Chalmers HD3 Parts |
| Batteries number | 2 |
| Batteries voltage | 6 V |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | - |
| Charging system | - |
| Charging Volts | - |
| Charging Amps | - |
| Trans system | Power Director |
| Trans type | mechanical shuttle |
| Trans gears | 4 forward and reverse |
| Clutch system | wet disc (Power Director) |
| Wheel drive | crawler |
| Final drive | - |
| Steering | mechanical clutches |
| Braking system | mechanical contracting band |
| Cabin type | Open operator station |
| Differentiel lock | - |
| System | open center |
| Valves | 1 to 3 |
| Pump flow | 15 gpm or 56.8 lpm |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | 16.5 gal or 62.5 L |
| Hydraulic pressure | - |
| Max flow | - |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | 26.17 hp or 19.5 kW |
| Fuel consumption | 2.6 gal/hour or 9.8 l/hour |
| Pulling power | 8207 lbs or 3722 kg |
| Claimed power | - |
| Real power | 32.53 hp or 24.3 kW |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | optional |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | 2.6 gal/hour or 9.8 l/hour |
| Hitch system | - |
| Rear hitch | - |
| Rear hitch lift | - |
| Front hitch | - |
| Front hitch lift | - |
Related tractor comparison
Iseki SX75 John Deere 430C
Allis Chalmers HD3 Oliver 995
Allis Chalmers HD3 Volvo T320 Buster
Iseki SX75 Massey Ferguson 97
Iseki SX75 Massey Ferguson 85
Iseki SX75 J.I. Case 611-B
Choose another tractor
Useful links and guides ....
- Iseki provided us with the latest version of its SX75 service repair manual
- Find All mechanical and electrical parts and accessories of Iseki SX75 farm-tractor here
- Get your Allis Chalmers HD3 manual book version
- Cabine, electrical And mechanical parts for Allis Chalmers HD3 farm-tractor here