International Harvester 856 VS Denning E 10-18 specs comparison
International Harvester 856
General Infos| Make | International Harvester |
| Model | 856 |
| Country | United states |
| Production | From 1967 Until 1971 |
| Price | 9,640 USD |
| Tractor type | - |
| Fuel | diesel |
| Service repair manual | International Harvester 856 Manual |
Dimensions, sizes and tires
| AG front tires | 11L-15 |
| AG rear tires | 18.4-38 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 10,290 lbs or 4667 kg |
| Length | - |
| Width | - |
| Height | - |
| Wheelbase | - |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | - |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 301 ci or 4.9 L |
| Cylinders | 6 cylinders |
| Engine power | - |
| Engine RPM | 2400 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | diesel |
| Fuel injection | - |
| Fuel tank size | 42 gal or 159.0 L |
| Oil capacity | 9 qts or 8.5 L |
| Oil change | - |
| Starter motor | - |
| Starter volts | 12 V |
| Parts And Accessories | International Harvester 856 Parts |
| Batteries number | 2 |
| Batteries voltage | 6 V |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | - |
| Charging system | - |
| Charging Volts | - |
| Charging Amps | - |
| Trans system | Torque Amplifier |
| Trans type | partial power shift |
| Trans gears | 16 forward and 8 reverse |
| Clutch system | - |
| Wheel drive | 4x2 2WD |
| Final drive | - |
| Steering | power |
| Braking system | differential hydraulic dry disc |
| Cabin type | - |
| Differentiel lock | - |
| System | - |
| Valves | - |
| Pump flow | 12 gpm or 45.4 lpm |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | - |
| Hydraulic pressure | - |
| Max flow | - |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | 87.2 hp or 65.0 kW |
| Fuel consumption | 6.6 gal/hour or 25.0 l/hour |
| Pulling power | 9,417 lbs or 4271 kg |
| Claimed power | 95 hp or 70.8 kW |
| Real power | 94.29 hp or 70.3 kW |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | independent |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | 6.0 gal/hour or 22.7 l/hour |
| Hitch system | - |
| Rear hitch | II |
| Rear hitch lift | - |
| Front hitch | - |
| Front hitch lift | - |
Denning E 10-18
General Infos| Make | Denning |
| Model | E 10-18 |
| Country | United states |
| Production | From 1916 Until 1918 |
| Price | - |
| Tractor type | Standard tread tractor |
| Fuel | gasoline |
| Service repair manual | Denning E 10-18 Manual |
Dimensions, sizes and tires
| AG front tires | - |
| AG rear tires | 46x10 steel |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 3600 lbs or 1632 kg |
| Length | 120 inches [304 cm] |
| Width | 56 inches [142 cm] |
| Height | 61 inches [154 cm] |
| Wheelbase | - |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | - |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 202 ci or 3.3 L |
| Cylinders | 4 cylinders |
| Engine power | - |
| Engine RPM | 1200 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | gasoline |
| Fuel injection | - |
| Fuel tank size | 15 gal or 56.8 L |
| Oil capacity | - |
| Oil change | - |
| Starter motor | - |
| Starter volts | - |
| Parts And Accessories | Denning E 10-18 Parts |
| Batteries number | - |
| Batteries voltage | - |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | - |
| Charging system | - |
| Charging Volts | - |
| Charging Amps | - |
| Trans system | - |
| Trans type | friction disc |
| Trans gears | 6 forward and reverse |
| Clutch system | - |
| Wheel drive | 4x2 2WD |
| Final drive | - |
| Steering | manual |
| Braking system | - |
| Cabin type | Open operator station |
| Differentiel lock | - |
| System | - |
| Valves | - |
| Pump flow | - |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | - |
| Hydraulic pressure | - |
| Max flow | - |
| Drawbar type | - |
| Claimed power | 10 hp or 7.5 kW |
| Drawbar horsepower | - |
| Fuel consumption | - |
| Pulling power | - |
| Claimed power | - |
| Real power | - |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | - |
| Rear PTO RPM | - |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | - |
| Hitch system | - |
| Rear hitch | - |
| Rear hitch lift | - |
| Front hitch | - |
| Front hitch lift | - |
Related tractor comparison
International Harvester 856 Twin City 40-65
Denning E 10-18 Heider C 12-20
Denning E 10-18 John Deere Dain AWD
Denning E 10-18 Square Turn 18-35
International Harvester 856 Leader 12-18
Denning E 10-18 Avery 40-80
Choose another tractor
Useful links and guides ....
- International Harvester provided us with the latest version of its 856 service repair manual
- Find All mechanical and electrical parts and accessories of International Harvester 856 farm-tractor here
- Get your Denning E 10-18 manual book version
- Cabine, electrical And mechanical parts for Denning E 10-18 farm-tractor here
