International Harvester 833 VS Allis Chalmers H3 specs comparison
International Harvester 833
General Infos| Make | International Harvester |
| Model | 833 |
| Country | United states |
| Production | From 1981 Until 1990 |
| Price | - |
| Tractor type | Utility tractor |
| Fuel | diesel |
| Service repair manual | International Harvester 833 Manual |
Dimensions, sizes and tires
| AG front tires | 10.5-18 |
| AG rear tires | 14.9R30 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 6426 lbs or 2914 kg |
| Length | 140.6 inches [357 cm] |
| Width | 77.6 inches [197 cm] |
| Height | 97.6 inches [247 cm] |
| Wheelbase | 84.65 inches [215 cm] |
| Ground clearance | 11.9 inches [30 cm] |
| Turning radius | - |
| Rear tread size | 50.2 to 76 inches |
| Front tread size | 54.1 to 63.9 inches |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 238.65 ci or 3.9 L |
| Cylinders | 4 cylinders |
| Engine power | 67 hp or 50.0 kW |
| Engine RPM | 2300 (rpm) |
| Torque | 173.3 lb-ft or 235.0 Nm | Torque RPM | 1500 (rpm) |
| Fuel type | diesel |
| Fuel injection | direct injection |
| Fuel tank size | 17.2 gal or 65.1 L |
| Oil capacity | 9.5 qts or 9.0 L |
| Oil change | - |
| Starter motor | - |
| Starter volts | 12 V |
| Parts And Accessories | International Harvester 833 Parts |
| Batteries number | - |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | - |
| Charging system | alternator |
| Charging Volts | - |
| Charging Amps | 33 amps |
| Trans system | Synchron |
| Trans type | creeper |
| Trans gears | 16 forward and 8 reverse |
| Clutch system | - |
| Wheel drive | 4x4 MFWD 4WD |
| Final drive | - |
| Steering | - |
| Braking system | - |
| Cabin type | - |
| Differentiel lock | - |
| System | - |
| Valves | - |
| Pump flow | 15.85 gpm or 60.0 lpm |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | 3.2 gal or 12.1 L |
| Hydraulic pressure | 2538 psi or 175.0 bar |
| Max flow | - |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | - |
| Fuel consumption | - |
| Pulling power | - |
| Claimed power | - |
| Real power | - |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | independent |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | - |
| Hitch system | position control and upper-link draft sensing |
| Rear hitch | II |
| Rear hitch lift | 4851 lbs or 2200 kg |
| Front hitch | - |
| Front hitch lift | - |
Allis Chalmers H3
General Infos| Make | Allis Chalmers |
| Model | H3 |
| Country | United states |
| Production | From 1960 Until 1967 |
| Price | - |
| Tractor type | - |
| Fuel | gasoline |
| Service repair manual | Allis Chalmers H3 Manual |
Dimensions, sizes and tires
| AG front tires | 7-inch track |
| AG rear tires | 7-inch track |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 7395 lbs or 3354 kg |
| Length | 108.75 inches [276 cm] |
| Width | - |
| Height | - |
| Wheelbase | 64 inches [162 cm] |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | 48 inches |
| Front tread size | 48 inches |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 149 ci or 2.4 L |
| Cylinders | 4 cylinders |
| Engine power | - |
| Engine RPM | 1650 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | gasoline |
| Fuel injection | Marvel-Schebler carburetor |
| Fuel tank size | 14 gal or 53.0 L |
| Oil capacity | - |
| Oil change | - |
| Starter motor | electric |
| Starter volts | 12 V |
| Parts And Accessories | Allis Chalmers H3 Parts |
| Batteries number | 1 |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | - |
| Charging system | - |
| Charging Volts | - |
| Charging Amps | - |
| Trans system | Power Director |
| Trans type | mechanical shuttle |
| Trans gears | 4 forward and reverse |
| Clutch system | wet disc (Power Director) |
| Wheel drive | crawler |
| Final drive | - |
| Steering | mechanical clutches |
| Braking system | mechanical contracting band |
| Cabin type | Open operator station |
| Differentiel lock | - |
| System | open center |
| Valves | 1 to 3 |
| Pump flow | 15 gpm or 56.8 lpm |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | 16.5 gal or 62.5 L |
| Hydraulic pressure | - |
| Max flow | - |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | 25.48 hp or 19.0 kW |
| Fuel consumption | 2.9 gal/hour or 11.0 l/hour |
| Pulling power | 7893 lbs or 3580 kg |
| Claimed power | - |
| Real power | 32.11 hp or 23.9 kW |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | optional |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | 2.9 gal/hour or 11.0 l/hour |
| Hitch system | - |
| Rear hitch | - |
| Rear hitch lift | - |
| Front hitch | - |
| Front hitch lift | - |
Related tractor comparison
International Harvester 833 J.I. Case 930
Allis Chalmers H3 Steiger Steiger1
International Harvester 833 Massey Ferguson DT7000
International Harvester 833 Oliver 500
International Harvester 833 Cockshutt 560
International Harvester 833 McCormick-Deering FU235
Choose another tractor
Useful links and guides ....
- International Harvester provided us with the latest version of its 833 service repair manual
- Find All mechanical and electrical parts and accessories of International Harvester 833 farm-tractor here
- Get your Allis Chalmers H3 manual book version
- Cabine, electrical And mechanical parts for Allis Chalmers H3 farm-tractor here