International Harvester 833 VS Allis Chalmers 8010 specs comparison

International Harvester 833 1981 comparison online with competitors

International Harvester 833

General Infos
Make International Harvester
Model 833
Country United states
Production From 1981  Until 1990
Price -
Tractor type Utility tractor
Fuel diesel
Service repair manual International Harvester 833 Manual

Dimensions, sizes and tires
AG front tires 10.5-18
AG rear tires 14.9R30
Lawn front tires -
Lawn rear tires -
Indus front tires -
Indus rear tires -
Weight 6426 lbs or 2914 kg
Length 140.6 inches [357 cm]
Width 77.6 inches [197 cm]
Height 97.6 inches [247 cm]
Wheelbase 84.65 inches [215 cm]
Ground clearance 11.9 inches [30 cm]
Turning radius -
Rear tread size 50.2 to 76 inches
Front tread size 54.1 to 63.9 inches
Turning radius -

Horsepower and engin specs
Engine capacity 238.65 ci or 3.9 L
Cylinders 4 cylinders
Engine power 67 hp or 50.0 kW
Engine RPM 2300 (rpm)
Torque 173.3 lb-ft or 235.0 Nm
Torque RPM 1500 (rpm)
Fuel type diesel
Fuel injection direct injection
Fuel tank size 17.2 gal or 65.1 L
Oil capacity 9.5 qts or 9.0 L
Oil change -
Starter motor -
Starter volts 12 V
Parts And Accessories International Harvester 833 Parts
Electrical and battery specs
Batteries number -
Batteries voltage 12 V
Battries Amps -
Cold Amps -
Ground force -
Charging system alternator
Charging Volts -
Charging Amps 33 amps
Clutch and gearbox specs
Trans system Synchron
Trans type creeper
Trans gears 16 forward and 8 reverse
Clutch system -
Cabine and mechanical specs
Wheel drive 4x4 MFWD 4WD
Final drive -
Steering -
Braking system -
Cabin type -
Differentiel lock -
Hydraulics specifications
System -
Valves -
Pump flow 15.85 gpm or 60.0 lpm
SVC flow -
Steering flow -
Tank capacity 3.2 gal or 12.1 L
Hydraulic pressure 2538 psi or 175.0 bar
Max flow -
Drawbar specifications
Drawbar type -
Claimed power -
Drawbar horsepower -
Fuel consumption -
Pulling power -
Power take-off (PTO) specs
Claimed power -
Real power -
Engine @RPM -
PTO Clutch -
Rear PTO independent
Rear PTO RPM 540 (rpm)
Front PTO -
Front PTO RPM -
Mid PTO -
Mid PTO RPM -
Fuel consumption -
3 point hitch specifiations
Hitch system position control and upper-link draft sensing
Rear hitch II
Rear hitch lift 4851 lbs or 2200 kg
Front hitch -
Front hitch lift -

Allis Chalmers 8010 1982 comparison online with competitors

Allis Chalmers 8010

General Infos
Make Allis Chalmers
Model 8010
Country United states
Production From 1982  Until 1985
Price 46,176  USD
Tractor type -
Fuel diesel
Service repair manual Allis Chalmers 8010 Manual

Dimensions, sizes and tires
AG front tires 11.00-16 (2WD)
AG rear tires 20.8-38
Lawn front tires -
Lawn rear tires -
Indus front tires -
Indus rear tires -
Weight 12,630 lbs or 5728 kg
Length 187 inches [474 cm]
Width 92.6 inches [235 cm]
Height 114 inches [289 cm]
Wheelbase 106 inches [269 cm] (2WD)
Ground clearance 17.5 inches [44 cm] (4WD front axle)
Turning radius -
Rear tread size -
Front tread size -
Turning radius -

Horsepower and engin specs
Engine capacity 301 ci or 4.9 L
Cylinders 6 cylinders
Engine power -
Engine RPM 2300 (rpm)
Torque -
Torque RPM -
Fuel type diesel
Fuel injection -
Fuel tank size 60 gal or 227.1 L
Oil capacity 16 qts or 15.1 L
Oil change -
Starter motor -
Starter volts 12 V
Parts And Accessories Allis Chalmers 8010 Parts
Electrical and battery specs
Batteries number -
Batteries voltage 12 V
Battries Amps -
Cold Amps -
Ground force -
Charging system alternator
Charging Volts -
Charging Amps 100 amps
Clutch and gearbox specs
Trans system Power Shift
Trans type Allis-Chalmers
Trans gears 12 forward and 2 reverse
Clutch system -
Cabine and mechanical specs
Wheel drive 4x2 2WD
Final drive -
Steering hydrostatic power
Braking system differential hydraulic wet discs
Cabin type Acousta cab standard with heat and air-conditioning
Differentiel lock foot-button
Hydraulics specifications
System load-sensitive
Valves 2 or 3
Pump flow 22 gpm or 83.3 lpm
SVC flow -
Steering flow 9.5 gpm or 36.0 lpm
Tank capacity -
Hydraulic pressure -
Max flow 45 gpm or 170.3 lpm
Drawbar specifications
Drawbar type -
Claimed power -
Drawbar horsepower 91.46 hp or 68.2 kW
Fuel consumption 7.3 gal/hour or 27.6 l/hour
Pulling power 9,102 lbs or 4128 kg
Power take-off (PTO) specs
Claimed power -
Real power 109.55 hp or 81.7 kW
Engine @RPM -
PTO Clutch -
Rear PTO independent
Rear PTO RPM 540 (rpm)
Front PTO -
Front PTO RPM -
Mid PTO -
Mid PTO RPM -
Fuel consumption 7.3 gal/hour or 27.6 l/hour
3 point hitch specifiations
Hitch system -
Rear hitch II
Rear hitch lift 6,680 lbs or 3030 kg
Front hitch -
Front hitch lift -

Related tractor comparison


1982 Allis Chalmers 8010 competitors and comparison tool online specs and performance
1981 International Harvester 6588 competitors and comparison tool online specs and performance

Allis Chalmers 8010 International Harvester 6588

1981 International Harvester 833 competitors and comparison tool online specs and performance
1982 Lamborghini 583 competitors and comparison tool online specs and performance

International Harvester 833 Lamborghini 583

1982 Allis Chalmers 8010 competitors and comparison tool online specs and performance
1982 Yanmar YM3220 competitors and comparison tool online specs and performance

Allis Chalmers 8010 Yanmar YM3220

1982 Allis Chalmers 8010 competitors and comparison tool online specs and performance
1981 Bolens G294 competitors and comparison tool online specs and performance

Allis Chalmers 8010 Bolens G294

1982 Allis Chalmers 8010 competitors and comparison tool online specs and performance
1981 SAME Trident 130 competitors and comparison tool online specs and performance

Allis Chalmers 8010 SAME Trident 130

1982 Allis Chalmers 8010 competitors and comparison tool online specs and performance
1980 Hurlimann H-5110 competitors and comparison tool online specs and performance

Allis Chalmers 8010 Hurlimann H-5110


Choose another tractor









Useful links and guides ....