International Harvester 484 VS John Deere 4010 specs comparison
International Harvester 484
General Infos| Make | International Harvester |
| Model | 484 |
| Country | United states |
| Production | From 1977 Until 1982 |
| Price | 11,800 USD |
| Tractor type | - |
| Fuel | - |
| Service repair manual | International Harvester 484 Manual |
Dimensions, sizes and tires
| AG front tires | 6.00-16 |
| AG rear tires | 13.6-28 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | - |
| Length | 138.3 inches 351 cm |
| Width | 78.5 inches 199 cm |
| Height | - |
| Wheelbase | 78.25 inches 198 cm |
| Ground clearance | 10.7 inches 27 cm |
| Turning radius | - |
| Rear tread size | - |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | - |
| Cylinders | 3 cylinders |
| Engine power | 50 hp 37.3 kW |
| Engine RPM | 2200 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | - |
| Fuel injection | - |
| Fuel tank size | 20 gal 75.7 L |
| Oil capacity | 6.8 qts 6.4 L |
| Oil change | - |
| Starter motor | - |
| Starter volts | 12 V |
| Parts And Accessories | International Harvester 484 Parts |
| Batteries number | 1 |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | negative |
| Charging system | - |
| Charging Volts | - |
| Charging Amps | - |
| Trans system | - |
| Trans type | syncromesh |
| Trans gears | 8 forward and 4 reverse |
| Clutch system | dry disc |
| Wheel drive | 4x2 2WD |
| Final drive | - |
| Steering | power |
| Braking system | independent hydraulic wet disc |
| Cabin type | Two-post fixed ROPS |
| Differentiel lock | - |
| System | - |
| Valves | - |
| Pump flow | - |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | - |
| Hydraulic pressure | - |
| Max flow | - |
| Drawbar type | - |
| Claimed power | 38 hp 28.3 kW |
| Drawbar horsepower | - |
| Fuel consumption | - |
| Pulling power | - |
| Claimed power | 42.4 hp 31.6 kW |
| Real power | - |
| Engine @RPM | - |
| PTO Clutch | hydraulic wet disc |
| Rear PTO | independent |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | - |
| Hitch system | position and draft control |
| Rear hitch | II |
| Rear hitch lift | 3100 lbs 1406 kg |
| Front hitch | - |
| Front hitch lift | - |
John Deere 4010
General Infos| Make | John Deere |
| Model | 4010 |
| Country | United states |
| Production | From 1960 Until 1963 |
| Price | 5,500 USD |
| Tractor type | Row Crop tractor |
| Fuel | gasoline |
| Service repair manual | John Deere 4010 Manual |
Dimensions, sizes and tires
| AG front tires | 6.00-16 |
| AG rear tires | 13.6-38 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 7,100 lbs or 3220 kg |
| Length | - |
| Width | - |
| Height | - |
| Wheelbase | 99.25 inches [252 cm] |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | 60 to 88 inches |
| Front tread size | 8.375 to 18.25 inches |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 302 ci or 4.9 L |
| Cylinders | 6 cylinders |
| Engine power | - |
| Engine RPM | 2200 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | gasoline |
| Fuel injection | - |
| Fuel tank size | 34 gal or 128.7 L |
| Oil capacity | - |
| Oil change | - |
| Starter motor | - |
| Starter volts | 12 V |
| Parts And Accessories | John Deere 4010 Parts |
| Batteries number | 1 |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | positive |
| Charging system | - |
| Charging Volts | - |
| Charging Amps | - |
| Trans system | John Deere Syncro-Range |
| Trans type | partially synchronized |
| Trans gears | 8 forward and 3 reverse |
| Clutch system | dry disc |
| Wheel drive | 4x2 2WD |
| Final drive | - |
| Steering | power assist |
| Braking system | differential hydraulic wet disc |
| Cabin type | Open operator station |
| Differentiel lock | - |
| System | closed center |
| Valves | 2 |
| Pump flow | 13 gpm or 49.2 lpm |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | - |
| Hydraulic pressure | - |
| Max flow | - |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | 71.93 hp or 53.6 kW |
| Fuel consumption | 5.5 gal/hour or 20.8 l/hour |
| Pulling power | 7,002 lbs or 3176 kg |
| Claimed power | 80 hp or 59.7 kW |
| Real power | 76.71 hp or 57.2 kW |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | independent |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | 4.9 gal/hour or 18.5 l/hour |
| Hitch system | - |
| Rear hitch | II |
| Rear hitch lift | - |
| Front hitch | - |
| Front hitch lift | - |
Related tractor comparison
International Harvester 484 J.I. Case 802-B Western Special
John Deere 4010 J.I. Case 730
International Harvester 484 Ferguson FF 30
John Deere 4010 International Harvester TD-25 Series 250
John Deere 4010 J.I. Case 611-B
International Harvester 484 Massey Ferguson 35X
Choose another tractor
Useful links and guides ....
- International Harvester provided us with the latest version of its 484 service repair manual
- Find All mechanical and electrical parts and accessories of International Harvester 484 farm-tractor here
- Get your John Deere 4010 manual book version
- Cabine, electrical And mechanical parts for John Deere 4010 farm-tractor here
