International Harvester 284 VS New Holland Workmaster 75 specs comparison
International Harvester 284
General Infos| Make | International Harvester |
| Model | 284 |
| Country | United states |
| Production | From 1976 Until 1984 |
| Price | - |
| Tractor type | Compact Utility tractor |
| Fuel | gasoline |
| Service repair manual | International Harvester 284 Manual |
Dimensions, sizes and tires
| AG front tires | 5.00-15 |
| AG rear tires | 11.2-24 |
| Lawn front tires | 20x8.00-10 |
| Lawn rear tires | 20x8.00-10 |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 2050 lbs or 929 kg |
| Length | 104.3 inches [264 cm] |
| Width | 55.5 inches [140 cm] |
| Height | - |
| Wheelbase | 68.6 inches [174 cm] |
| Ground clearance | 13.8 inches [35 cm] (center) |
| Turning radius | 9 feet [2.7 m] |
| Rear tread size | - |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 99 ci or 1.6 L |
| Cylinders | 3 cylinders |
| Engine power | 30 hp or 22.4 kW |
| Engine RPM | 2600 (rpm) |
| Torque | 65 lb-ft or 88.1 Nm | Torque RPM | 1700 (rpm) |
| Fuel type | gasoline |
| Fuel injection | - |
| Fuel tank size | 8.7 gal or 32.9 L |
| Oil capacity | 5.2 qts or 4.9 L |
| Oil change | - |
| Starter motor | - |
| Starter volts | 12 V |
| Parts And Accessories | International Harvester 284 Parts |
| Batteries number | 1 |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | - |
| Charging system | alternator |
| Charging Volts | - |
| Charging Amps | 20 amps |
| Trans system | sliding gear |
| Trans type | - |
| Trans gears | 8 forward and 2 reverse |
| Clutch system | dry disc |
| Wheel drive | 4x2 2WD |
| Final drive | - |
| Steering | manual |
| Braking system | hydraulic wet disc |
| Cabin type | Open operator station |
| Differentiel lock | - |
| System | - |
| Valves | - |
| Pump flow | - |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | 3.4 gal or 12.9 L |
| Hydraulic pressure | 1920 psi or 132.4 bar |
| Max flow | 6 gpm or 22.7 lpm |
| Drawbar type | - |
| Claimed power | 21 hp or 15.7 kW |
| Drawbar horsepower | 21.98 hp or 16.4 kW |
| Fuel consumption | 2.0 gal/hour or 7.6 l/hour |
| Pulling power | 2,523 lbs or 1144 kg |
| Claimed power | 25.8 hp or 19.2 kW |
| Real power | 23.92 hp or 17.8 kW |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | transmission |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | 1.7 gal/hour or 6.4 l/hour |
| Hitch system | position control |
| Rear hitch | I |
| Rear hitch lift | 2000 lbs or 907 kg |
| Front hitch | - |
| Front hitch lift | - |
New Holland Workmaster 75
General Infos| Make | New Holland |
| Model | Workmaster 75 |
| Country | United states |
| Production | From 2010 Until 2014 |
| Price | - |
| Tractor type | Utility tractor |
| Fuel | diesel |
| Service repair manual | New Holland Workmaster 75 Manual |
Dimensions, sizes and tires
| AG front tires | 11.2x24 |
| AG rear tires | 16.9x30 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 5,059 lbs or 2294 kg |
| Length | 137.2 inches [348 cm] |
| Width | 78.4 inches [199 cm] |
| Height | 95.3 inches [242 cm] |
| Wheelbase | - |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | 59.7 to 80.2 inches |
| Front tread size | 59.6 to 79.6 inches |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 195 ci or 3.2 L |
| Cylinders | 4 cylinders |
| Engine power | 75 hp or 55.9 kW |
| Engine RPM | 2500 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | diesel |
| Fuel injection | - |
| Fuel tank size | 16 gal or 60.6 L |
| Oil capacity | - |
| Oil change | - |
| Starter motor | electric |
| Starter volts | 12 V |
| Parts And Accessories | New Holland Workmaster 75 Parts |
| Batteries number | - |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | 800 |
| Ground force | negative |
| Charging system | alternator |
| Charging Volts | 12 V |
| Charging Amps | 65 amps |
| Trans system | - |
| Trans type | partially synchronized |
| Trans gears | 8 forward and 2 reverse |
| Clutch system | 11-inch dry organic plate |
| Wheel drive | 4x4 MFWD 4WD |
| Final drive | - |
| Steering | hydrostatic power |
| Braking system | differential mechanical wet disc |
| Cabin type | Two-post foldable ROPS |
| Differentiel lock | mechanical rear lock engaged by foot pedal |
| System | open center fixed displacement |
| Valves | 1 or 2 |
| Pump flow | 10.4 gpm or 39.4 lpm |
| SVC flow | - |
| Steering flow | 8.3 gpm or 31.4 lpm |
| Tank capacity | - |
| Hydraulic pressure | - |
| Max flow | 18.7 gpm or 70.8 lpm |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | - |
| Fuel consumption | - |
| Pulling power | - |
| Claimed power | 65 hp or 48.5 kW |
| Real power | 66.69 hp or 49.7 kW |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | independent |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | 4.0 gal/hour or 15.1 l/hour |
| Hitch system | position control and mechanical draft sensing |
| Rear hitch | 2/1 |
| Rear hitch lift | 3,276 lbs or 1485 kg |
| Front hitch | - |
| Front hitch lift | - |
Related tractor comparison
International Harvester 284 Montana P7084C
International Harvester 284 CaseIH JX60
New Holland Workmaster 75 New Holland TD5030
New Holland Workmaster 75 Massey Ferguson 7497
New Holland Workmaster 75 John Deere 5075E
International Harvester 284 John Deere 6100D
Choose another tractor
Useful links and guides ....
- International Harvester provided us with the latest version of its 284 service repair manual
- Find All mechanical and electrical parts and accessories of International Harvester 284 farm-tractor here
- Get your New Holland Workmaster 75 manual book version
- Cabine, electrical And mechanical parts for New Holland Workmaster 75 farm-tractor here
