International Harvester 284 VS Deutz-Fahr DX 3.50 specs comparison
International Harvester 284
General Infos| Make | International Harvester |
| Model | 284 |
| Country | United states |
| Production | From 1976 Until 1984 |
| Price | - |
| Tractor type | Compact Utility tractor |
| Fuel | gasoline |
| Service repair manual | International Harvester 284 Manual |
Dimensions, sizes and tires
| AG front tires | 5.00-15 |
| AG rear tires | 11.2-24 |
| Lawn front tires | 20x8.00-10 |
| Lawn rear tires | 20x8.00-10 |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 2050 lbs or 929 kg |
| Length | 104.3 inches [264 cm] |
| Width | 55.5 inches [140 cm] |
| Height | - |
| Wheelbase | 68.6 inches [174 cm] |
| Ground clearance | 13.8 inches [35 cm] (center) |
| Turning radius | 9 feet [2.7 m] |
| Rear tread size | - |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 99 ci or 1.6 L |
| Cylinders | 3 cylinders |
| Engine power | 30 hp or 22.4 kW |
| Engine RPM | 2600 (rpm) |
| Torque | 65 lb-ft or 88.1 Nm | Torque RPM | 1700 (rpm) |
| Fuel type | gasoline |
| Fuel injection | - |
| Fuel tank size | 8.7 gal or 32.9 L |
| Oil capacity | 5.2 qts or 4.9 L |
| Oil change | - |
| Starter motor | - |
| Starter volts | 12 V |
| Parts And Accessories | International Harvester 284 Parts |
| Batteries number | 1 |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | - |
| Charging system | alternator |
| Charging Volts | - |
| Charging Amps | 20 amps |
| Trans system | sliding gear |
| Trans type | - |
| Trans gears | 8 forward and 2 reverse |
| Clutch system | dry disc |
| Wheel drive | 4x2 2WD |
| Final drive | - |
| Steering | manual |
| Braking system | hydraulic wet disc |
| Cabin type | Open operator station |
| Differentiel lock | - |
| System | - |
| Valves | - |
| Pump flow | - |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | 3.4 gal or 12.9 L |
| Hydraulic pressure | 1920 psi or 132.4 bar |
| Max flow | 6 gpm or 22.7 lpm |
| Drawbar type | - |
| Claimed power | 21 hp or 15.7 kW |
| Drawbar horsepower | 21.98 hp or 16.4 kW |
| Fuel consumption | 2.0 gal/hour or 7.6 l/hour |
| Pulling power | 2,523 lbs or 1144 kg |
| Claimed power | 25.8 hp or 19.2 kW |
| Real power | 23.92 hp or 17.8 kW |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | transmission |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | 1.7 gal/hour or 6.4 l/hour |
| Hitch system | position control |
| Rear hitch | I |
| Rear hitch lift | 2000 lbs or 907 kg |
| Front hitch | - |
| Front hitch lift | - |
Deutz-Fahr DX 3.50
General Infos| Make | Deutz-Fahr |
| Model | DX 3.50 |
| Country | Germany |
| Production | From 1984 Until 1995 |
| Price | - |
| Tractor type | Utility tractor |
| Fuel | diesel |
| Service repair manual | Deutz-Fahr DX 3.50 Manual |
Dimensions, sizes and tires
| AG front tires | 7.50x16 |
| AG rear tires | 16.9x30 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 6018 lbs or 2729 kg |
| Length | 144.5 inches [367 cm] |
| Width | 82.3 inches [209 cm] |
| Height | 97.5 inches [247 cm] |
| Wheelbase | 82 inches [208 cm] |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | 59 to 78.8 inches |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 186.72 ci or 3.1 L |
| Cylinders | 3 cylinders |
| Engine power | 61 hp or 45.5 kW |
| Engine RPM | 2500 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | diesel |
| Fuel injection | - |
| Fuel tank size | 19.8 gal or 74.9 L |
| Oil capacity | 8.5 qts or 8.0 L |
| Oil change | - |
| Starter motor | - |
| Starter volts | - |
| Parts And Accessories | Deutz-Fahr DX 3.50 Parts |
| Batteries number | - |
| Batteries voltage | - |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | - |
| Charging system | - |
| Charging Volts | - |
| Charging Amps | - |
| Trans system | Dual-Split |
| Trans type | two-speed power shift |
| Trans gears | 24 forward and 8 reverse |
| Clutch system | dry disc |
| Wheel drive | 4x2 2WD |
| Final drive | - |
| Steering | power |
| Braking system | - |
| Cabin type | Four-post ROPS with canopy |
| Differentiel lock | mechanical rear |
| System | open center |
| Valves | 1 to 3 |
| Pump flow | 13.5 gpm or 51.1 lpm |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | 4 gal or 15.1 L |
| Hydraulic pressure | 2538 psi or 175.0 bar |
| Max flow | - |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | - |
| Fuel consumption | - |
| Pulling power | - |
| Claimed power | - |
| Real power | - |
| Engine @RPM | - |
| PTO Clutch | dry disc |
| Rear PTO | independent |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | independent |
| Front PTO RPM | 1000 (rpm) |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | - |
| Hitch system | position and draft control |
| Rear hitch | II |
| Rear hitch lift | 5291 lbs or 2399 kg |
| Front hitch | II |
| Front hitch lift | - |
Related tractor comparison
Deutz-Fahr DX 3.50 Kubota L2550
International Harvester 284 White 2-110
International Harvester 284 Deutz-Allis 7110
International Harvester 284 Mitsubishi MT2801
Deutz-Fahr DX 3.50 John Deere 4250
International Harvester 284 Iseki TA250
Choose another tractor
Useful links and guides ....
- International Harvester provided us with the latest version of its 284 service repair manual
- Find All mechanical and electrical parts and accessories of International Harvester 284 farm-tractor here
- Get your Deutz-Fahr DX 3.50 manual book version
- Cabine, electrical And mechanical parts for Deutz-Fahr DX 3.50 farm-tractor here
