International Harvester 2806 VS John Deere 5010I specs comparison

International Harvester 2806
General InfosMake | International Harvester |
Model | 2806 |
Country | United states |
Production | From 1963 Until 1967 |
Price | - |
Tractor type | Industrial tractor |
Fuel | gasoline |
Service repair manual | International Harvester 2806 Manual |
Dimensions, sizes and tires
AG front tires | - |
AG rear tires | - |
Lawn front tires | - |
Lawn rear tires | - |
Indus front tires | 7.50-20 |
Indus rear tires | 23.1-30 |
Weight | 8,600 lbs or 3900 kg |
Length | 155 inches [393 cm] (with 3-point) |
Width | 80 inches [203 cm] |
Height | - |
Wheelbase | 91 inches [231 cm] |
Ground clearance | - |
Turning radius | - |
Rear tread size | 60 to 84 inches |
Front tread size | 53 inches |
Turning radius | - |
Horsepower and engin specs
Engine capacity | 301 ci or 4.9 L |
Cylinders | 6 cylinders |
Engine power | 119 hp or 88.7 kW |
Engine RPM | 2400 (rpm) |
Torque | - | Torque RPM | - |
Fuel type | gasoline |
Fuel injection | - |
Fuel tank size | 42 gal or 159.0 L |
Oil capacity | 9 qts or 8.5 L |
Oil change | - |
Starter motor | - |
Starter volts | 12 V |
Parts And Accessories | International Harvester 2806 Parts |
Batteries number | 2 |
Batteries voltage | 6 V |
Battries Amps | 170 amps |
Cold Amps | - |
Ground force | - |
Charging system | alternator |
Charging Volts | - |
Charging Amps | 55 amps |
Trans system | International Harvester Torque Amplifier |
Trans type | partial power shift |
Trans gears | 16 forward and 8 reverse |
Clutch system | - |
Wheel drive | 4x2 2WD |
Final drive | - |
Steering | hydrostatic power |
Braking system | hydraulic disc |
Cabin type | Open operator station |
Differentiel lock | - |
System | - |
Valves | - |
Pump flow | 12 gpm or 45.4 lpm |
SVC flow | - |
Steering flow | 9 gpm or 34.1 lpm |
Tank capacity | - |
Hydraulic pressure | - |
Max flow | 21 gpm or 79.5 lpm |
Drawbar type | - |
Claimed power | - |
Drawbar horsepower | - |
Fuel consumption | - |
Pulling power | - |
Claimed power | 94 hp or 70.1 kW |
Real power | - |
Engine @RPM | - |
PTO Clutch | - |
Rear PTO | independent |
Rear PTO RPM | 540 (rpm) |
Front PTO | - |
Front PTO RPM | - |
Mid PTO | - |
Mid PTO RPM | - |
Fuel consumption | - |
Hitch system | - |
Rear hitch | II/I |
Rear hitch lift | - |
Front hitch | - |
Front hitch lift | - |

John Deere 5010I
General InfosMake | John Deere |
Model | 5010I |
Country | United states |
Production | From 1963 Until 1965 |
Price | - |
Tractor type | Industrial tractor |
Fuel | diesel |
Service repair manual | John Deere 5010I Manual |
Dimensions, sizes and tires
AG front tires | - |
AG rear tires | - |
Lawn front tires | - |
Lawn rear tires | - |
Indus front tires | 11.00-16 |
Indus rear tires | 18.00-25 |
Weight | 13550 lbs or 6146 kg |
Length | 157.125 inches [399 cm] |
Width | 75.75 inches [192 cm] |
Height | - |
Wheelbase | 95.5 inches [242 cm] |
Ground clearance | 13 inches [33 cm] |
Turning radius | - |
Rear tread size | - |
Front tread size | - |
Turning radius | - |
Horsepower and engin specs
Engine capacity | 531 ci or 8.7 L |
Cylinders | 6 cylinders |
Engine power | 129 hp or 96.2 kW |
Engine RPM | 2200 (rpm) |
Torque | 329 lb-ft or 446.1 Nm | Torque RPM | 1300 (rpm) |
Fuel type | diesel |
Fuel injection | - |
Fuel tank size | 49 gal or 185.5 L |
Oil capacity | 12 qts or 11.4 L |
Oil change | - |
Starter motor | electric |
Starter volts | 24 V |
Parts And Accessories | John Deere 5010I Parts |
Batteries number | 4 |
Batteries voltage | 6 V |
Battries Amps | - |
Cold Amps | - |
Ground force | - |
Charging system | - |
Charging Volts | - |
Charging Amps | - |
Trans system | John Deere Syncro-Range |
Trans type | partially synchronized |
Trans gears | 8 forward and 3 reverse |
Clutch system | two 279.4mm dry discs |
Wheel drive | 4x2 2WD |
Final drive | - |
Steering | hydraulic power |
Braking system | hydraulic wet disc |
Cabin type | Open operator station |
Differentiel lock | - |
System | - |
Valves | - |
Pump flow | 25.7 gpm or 97.3 lpm |
SVC flow | - |
Steering flow | - |
Tank capacity | 16 gal or 60.6 L |
Hydraulic pressure | 2000 psi or 137.9 bar |
Max flow | - |
Drawbar type | - |
Claimed power | - |
Drawbar horsepower | - |
Fuel consumption | - |
Pulling power | - |
Claimed power | - |
Real power | - |
Engine @RPM | - |
PTO Clutch | hydraulic wet disc |
Rear PTO | independent |
Rear PTO RPM | 1000 (rpm) |
Front PTO | - |
Front PTO RPM | - |
Mid PTO | - |
Mid PTO RPM | - |
Fuel consumption | - |
Hitch system | - |
Rear hitch | - |
Rear hitch lift | - |
Front hitch | - |
Front hitch lift | - |
Related tractor comparison


International Harvester 2806 Caterpillar D9G


International Harvester 2806 John Deere 450


John Deere 5010I International Harvester 2424


John Deere 5010I John Deere 300


John Deere 5010I John Deere 400


International Harvester 2806 J.I. Case 430CK
Choose another tractor
Useful links and guides ....
- International Harvester provided us with the latest version of its 2806 service repair manual
- Find All mechanical and electrical parts and accessories of International Harvester 2806 industrial-tractor here
- Get your John Deere 5010I manual book version
- Cabine, electrical And mechanical parts for John Deere 5010I industrial-tractor here