International Harvester 140 VS Farmall 826 specs comparison
International Harvester 140
General Infos| Make | International Harvester |
| Model | 140 |
| Country | United states |
| Production | From 1958 Until 1979 |
| Price | - |
| Tractor type | - |
| Fuel | gasoline |
| Service repair manual | International Harvester 140 Manual |
Dimensions, sizes and tires
| AG front tires | 6.00-16 |
| AG rear tires | 11.2-24 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 2700 lbs or 1224 kg |
| Length | 107 inches [271 cm] |
| Width | 56 inches [142 cm] |
| Height | - |
| Wheelbase | 71 inches [180 cm] |
| Ground clearance | 22.3 inches [56 cm] |
| Turning radius | - |
| Rear tread size | 40 to 68 inches |
| Front tread size | 40 to 58 inches |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 122.7 ci or 2.0 L |
| Cylinders | 4 cylinders |
| Engine power | 25 hp or 18.6 kW |
| Engine RPM | 1400 (rpm) |
| Torque | 106 lb-ft or 143.7 Nm | Torque RPM | 1400 (rpm) |
| Fuel type | gasoline |
| Fuel injection | - |
| Fuel tank size | 11 gal or 41.6 L |
| Oil capacity | 5 qts or 4.7 L |
| Oil change | - |
| Starter motor | - |
| Starter volts | 6 V |
| Parts And Accessories | International Harvester 140 Parts |
| Batteries number | 1 |
| Batteries voltage | 6 V |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | positive |
| Charging system | generator (early) |
| Charging Volts | - |
| Charging Amps | - |
| Trans system | - |
| Trans type | sliding gear |
| Trans gears | 4 forward and 1 reverse |
| Clutch system | single 9-inch dry disc |
| Wheel drive | 4x2 2WD |
| Final drive | - |
| Steering | manual worm-and-sector |
| Braking system | differential mechanical contracting band |
| Cabin type | Open operator station |
| Differentiel lock | - |
| System | IH Touch-Control |
| Valves | - |
| Pump flow | - |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | 3.38 gal or 12.8 L |
| Hydraulic pressure | - |
| Max flow | 4.6 gpm or 17.4 lpm |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | 21.25 hp or 15.8 kW |
| Fuel consumption | 2.0 gal/hour or 7.6 l/hour |
| Pulling power | 3,611 lbs or 1637 kg |
| Claimed power | 21 hp or 15.7 kW |
| Real power | - |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | transmission |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | - |
| Hitch system | - |
| Rear hitch | - |
| Rear hitch lift | - |
| Front hitch | - |
| Front hitch lift | - |
Farmall 826
General Infos| Make | Farmall |
| Model | 826 |
| Country | United states |
| Production | From 1969 Until 1971 |
| Price | - |
| Tractor type | - |
| Fuel | diesel |
| Service repair manual | Farmall 826 Manual |
Dimensions, sizes and tires
| AG front tires | 9.5L-15 |
| AG rear tires | 18.4-34 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 9860 lbs or 4472 kg |
| Length | - |
| Width | - |
| Height | - |
| Wheelbase | 105 inches [266 cm] |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | - |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 301 ci or 4.9 L |
| Cylinders | 6 cylinders |
| Engine power | - |
| Engine RPM | 2400 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | diesel |
| Fuel injection | - |
| Fuel tank size | 37 gal or 140.0 L |
| Oil capacity | - |
| Oil change | - |
| Starter motor | - |
| Starter volts | 12 V |
| Parts And Accessories | Farmall 826 Parts |
| Batteries number | - |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | - |
| Charging system | - |
| Charging Volts | - |
| Charging Amps | - |
| Trans system | International Harvester Torque Amplifier |
| Trans type | hydrostatic |
| Trans gears | infinite forward and reverse |
| Clutch system | - |
| Wheel drive | 4x2 2WD |
| Final drive | - |
| Steering | power |
| Braking system | hydraulic dry disc |
| Cabin type | Open operator station |
| Differentiel lock | - |
| System | open center |
| Valves | - |
| Pump flow | - |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | - |
| Hydraulic pressure | - |
| Max flow | - |
| Drawbar type | - |
| Claimed power | 61 hp or 45.5 kW |
| Drawbar horsepower | 61.39 hp or 45.8 kW |
| Fuel consumption | 6.1 gal/hour or 23.1 l/hour |
| Pulling power | 8,780 lbs or 3982 kg |
| Claimed power | 84 hp or 62.6 kW |
| Real power | 79.00 hp or 58.9 kW |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | independent |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | 5.6 gal/hour or 21.2 l/hour |
| Hitch system | - |
| Rear hitch | II |
| Rear hitch lift | - |
| Front hitch | - |
| Front hitch lift | - |
Related tractor comparison
International Harvester 140 Fendt Farmer 1D
International Harvester 140 Renault 89
International Harvester 140 John Deere 4000
International Harvester 140 Fendt Favorit 4S
International Harvester 140 Steyr 760
Farmall 826 John Deere 2030
Choose another tractor
Useful links and guides ....
- International Harvester provided us with the latest version of its 140 service repair manual
- Find All mechanical and electrical parts and accessories of International Harvester 140 farm-tractor here
- Get your Farmall 826 manual book version
- Cabine, electrical And mechanical parts for Farmall 826 farm-tractor here